Hans Grohe AlFie Aquasaur User manual

Brand: Hans Grohe

Model: AlFie Aquasaur

Type: User manual

Hans Grohe AlFie Aquasaur is a brightly colored handshower that makes showering fun. Designed for the young at heart, Alfie features two spray modes and unique self-cleaning whiskers.

Alfie the Aquasaur is easy to install and use. Simply remove your existing showerhead and attach Alfie in its place. Alfie comes with a variety of mounting options, so you can choose the one that best suits your needs.

Alfie's two spray modes offer a variety of showering experiences. The gentle rain mode is perfect for a relaxing shower, while the invigorating jet mode is perfect for waking up in the morning or rinsing off after a workout.

Hans Grohe AlFie Aquasaur is a brightly colored handshower that makes showering fun. Designed for the young at heart, Alfie features two spray modes and unique self-cleaning whiskers.

The Fun Handshower

REPLACING EXISTING SHOWERHEAD WITH ALFIE

Enclosed you will find complete

instructions for installing Alfie

the Aquasaur, a brightly colored

handshower that makes showering fun.

Designed for the young at heart, Alfie

features two spraymodes and unique

self-cleaning whiskers.

Alfie the Aquasaur is just one of a full

range of Hansgrohe products for bath

and kitchen. Each product has been

carefully designed to be safe, reliable,

and easy to use.

If you would like to receive further

information on Hansgrohe, please call

us at 800 334 0455.

• Unscrew existing showerhead from shower

arm.

• Clean threads on shower arm with steel

wool and wrap the threads with Teflon

tape.

• Place a hose washer in the shorter of the two

hose end connectors on the Techniflex hose.

Screw this end of the hose to the shower

arm. If wrench tightening is necessary, use

a cloth to protect the finish.

• Place a second hose washer in the longer

hose end connector. Attach this end to Alfie

and hand tighten.

• Support Alfie with a stationary handshower

support (28321000), or an angle-adjustable

Porter’E handshower support (27504000).

• Note: see instructions provided with

individual products for additional installation

guidelines.

• Note: Hansgrohe recommends the use

of external vacuum breaker (06510000)

between the shower arm and Techniflex

hose.

ADDING ALFIE TO AN EXISTING SHOWERHEAD

WITH INVERSA DIVERTER

• Remove existing showerhead from the

shower arm. If it is necessary to use a

wrench, protect the showerhead and shower

arm connector with a cloth.

• Clean the shower arm threads with steel

wool and wrap with Teflon

tape.

• Attach Inversa Diverter (28719000) to

shower arm. Wrench tighten, using a cloth

to protect the finish. Wrap both outlets of

the Inversa with Teflon

tape.

• Reattach the showerhead to the front outlet

of the Inversa diverter and wrench tighten.

• Place a hose washer in the shorter hose

end connector. Screw the shorter hose end

connection to the side outlet port of the

Inversa.

• Place a hose washer in the longer hose end

connector. Attach this end to Alfie and hand

tighten.

• Use handshower support (28321000) to

support Alfie.

THE FOLLOWING

INSTALLATION OPTIONS RE-

QUIRE IN-WALL

PLUMBING

INSTALLATION BY A

PROFESSIONAL PLUMBER IS

REQUIRED.

90743105 03/2008

Please note: in Massachusetts, the

maximum output water temperature can

be no higher than 112°F.

EPLACING EXISTING SHOWERHEAD AND ARM

WITH ALFIE AND WALL OUTLET

• Remove existing showerhead and shower

arm.

• Obtain a ½” male threaded brass nipple.

The nipple should be long enough so that

it extends 5/8” outside the surface of the

finished wall. Wrap both ends of the nipple

with Teflon

tape and install.

• Attach wall outlet (27458001) to the

exposed nipple. Wrap the exposed male

end of the wall outlet with Teflon

tape.

• Place a hose washer in the shorter hose

end connector. Attach the short hose end

connector to the wall outlet. If wrench

tightening is necessary, protect the finish

with a cloth.

• Place a hose washer in the longer hose end

connector. Attach this end to Alfie and hand

tighten.

• Support Alfie with a stationary handshower

support (28321000) or an angle-adjustable

Porter’E handshower support (27504000).

NOTE: ThE abOvE iNsTallaTiON OpTiON shOuld bE

iNsTallEd ONly by a prOfEssiONal plumbEr.

MOUNTING ALFIE ON A WALLBAR WITH WALL

OUTLET

• Remove existing showerhead and

shower arm.

• Obtain a ½” male threaded brass

nipple. The nipple should be long

enough so that it extends 5/8” outside

the surface of the finished wall. Wrap

both ends of the nipple with Teflon

tape and install.

• Install wall outlet (27458001) to the

nipple.

• Install wallbar Unica’B (27702000)

or Unica’S (27712000) at the desired

height.

• Wrap the wall outlet nipple with

Teflon

tape. Place a hose washer in

the shorter hose end connector. Screw

this end to the wall outlet. Place a

hose washer in the longer hose end

connector. Attach this end to Alfie and

hand tighten..

• Sit Alfie in the holder on the wallbar.

NOTE: ThE abOvE iNsTallaTiON OpTiON shOuld bE

iNsTallEd ONly by a prOfEssiONal plumbEr.

existing handshower, snap-on connector

(28346000) can be specified.

NOTE: Disconnect the Alfie handshower

from the hose by depressing the button.

Handshowers with the snap-on connector

are not recommended for use by children,

who may accidentally disconnect the

handshower while in use.

REPLACING EXISTING SHOWERHEAD AND ARM

WITH ALFIE AND PORTER’E HANDSHOWER SUPPORT

AND HOSE

• Remove existing showerhead and shower

arm.

• Obtain a ½” male threaded brass nipple.

The nipple should be long enough so that

it extends 5/8” outside the surface of the

finished wall. Wrap both ends of the nipple

with Teflon

tape and install.

• Install the Porter’E with outlet (27508001)

mounting piece according to the installation

instructions included with it. Install the

cover. Wrap the outlet threads with Teflon

tape.

• Place a hose washer to the shorter hose end

connector Attach this end to the Porter’E.

Wrench tighten if desired, but use a cloth

to protect the finish on the hose and on the

Porter’E.

• Place a hose washer to the longer hose end

connector. Attach this end to Alfie and hand

tighten.

• Sit Alfie in the holder.

NOTE: ThE abOvE iNsTallaTiON OpTiON shOuld bE

iNsTallEd ONly by a prOfEssiONal plumbEr.

SNAP-ON CONNECTOR SET 28346000

If Alfie is to be used as an accessory to an

Hans Grohe AlFie Aquasaur User manual

Brand: Hans Grohe

Model: AlFie Aquasaur

Type: User manual

Hans Grohe AlFie Aquasaur is a brightly colored handshower that makes showering fun. Designed for the young at heart, Alfie features two spray modes and unique self-cleaning whiskers.

Download PDF

report

Hans Grohe AlFie Aquasaur User manual

Hans Grohe AlFie Aquasaur User manual

Related papers

Other documents