THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this light fixture. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
Item #1000 000 000
Model #16658
USE AND CARE GUIDE
3-LIGHT PENDANT
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
2
Table of Contents
Table of Contents .......................................................... 2
Safety Information
......................................................... 2
Warranty
......................................................................... 2
Five (5) Year Warranty ............................................................. 2
What is Covered....................................................................... 2
What is Not Covered ................................................................ 2
Pre-Installation .............................................................. 3
Planning Installation ................................................................ 3
Tools Required......................................................................... 3
Hardware Included................................................................... 3
Package Contents .................................................................... 4
Installation ..................................................................... 5
Care and Cleaning ........................................................ 7
Troubleshooting............................................................ 7
Service Parts ................................................................ . 8
READ AND SAVE THESE INSTRUCTIONS.
Ƒ For your protection and safety, carefully read and
understand the information provided in this manual
completely before attempting to assemble, install, or
operate this product. Failure to do so could lead to electrical
shock, fire, or other injuries that could be hazardous or even
fatal.
Ƒ Before touching any wire, use a voltage tester to make sure
it is not live.
Ƒ When replacing fuses, turn off the main power first. Make
sure your hands and feet are dry, and place one hand behind
your back to prevent electricity from making a complete
circuit through your chest. Touch a plug fuse only by its
insulated rim. Remove cartridge fuses with a fuse puller.
Ƒ Use tools with insulated handles and ladders made of wood
or fiberglass.
Ƒ To protect children, place a safety cover over any unused
outlets.
Warranty
FIVE (5) YEAR WARRANTY
WHAT IS COVERED
The manufacturer warrants this fixture to be free from defects in materials and workmanship for a period of five (5) years from date of
purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product
is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the
manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alteration,
neglect, or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any
way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of
an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship.
This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is considered normal
wear and tear.
WHAT IS NOT COVERED
The manufacturer does not warrant and specifically disclaims any warranty, whether expressed or implied, of fitness for a particular
purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any
consequential or incidental loss or damage, including but not limited to any labor/expense costs involved in the replacement or repair of
said product.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.hamptonbay.com.
Safety Information
DANGER: Before starting installation of this fixture
or removal of a previous fixture, disconnect the power
by turning off the circuit breaker, removing the fuse at
the fuse box, or tripping the breaker that controls that
circuit. Tape a sign to the panel warning others to
leave the circuit alone while you work.
CAUTION: CONSULT A QUALIFIED ELECTRICIAN IF
YOU HAVE ANY ELECTRICAL QUESTIONS. If you have
any non-electrical questions about this fixture, please
call our Customer Service Team at
1-855-HD-HAMPTON or visit www.hamptonbay.com.
Please reference your SKU (1000 000 000) or UPC
(802513166583).
3 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Installation
PLANNING INSTALLATION
Read all instructions before installation.
To avoid damaging this product, place it on a soft, non-abrasive surface, such as carpet or cardboard.
IMPORTANT: Inspect the wire insulation for any
cuts, abrasions, or exposed copper that may have
occurred during shipping. If there is a defect in the
wire, do not attempt installation. Please call the
Customer Service Team at 1-855-HD-HAMPTON.
TOOLS REQUIRED
Phillips Wire Pliers
Screwdriver Stripper
Safety Electrical
Goggles Tape
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA BB
CC DD EE FF
GG HH II JJ
KK LL
Part Description Quantity Part Description Quantity
AA Mounting bracket 1 GG Wire connector 3
BB Outlet box screw 2 HH Lock washer 1
CC
Green ground screw (Preassembled
to mounting bracket (AA))
1
II Threaded tube 1
DD
Ring (Preassembled to screw collar
loop(EE))
1
JJ Knob nut 3
EE Screw collar loop 1 KK Plastic washer 1
FF Hex nut 1 LL Metal washer 1
NOTE: This product requires three 60W maximum
medium base (E26) type A bulbs or 13W maximum
medium base (E26) SBCFLs (sold separately).
4
Pre-Installation (continued)
PACKAGE CONTENTS
A
B
C
D
E
F
G
H
Part Description Quantity Part Description Quantity
A Canopy 1 E Finial 1
B Chain 1 F Glass shade 1
C Loop 1 G Triangle frame 1
D Fixture body 3 H Cap assembly 1
5 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installation
1
Preparing for installation
2
Attaching the canopy to the outlet
box
ƶ Fasten the mounting bracket (AA) onto the outlet box using
two outlet box screws (BB).
ƶ Screw the threaded tube (II) into the mounting bracket (AA),
and secure it using the lock washer (HH) and hex nut (FF).
NOTE: This threaded tube (II) should extend long
enough to protrude through the canopy when it is
mounted. (Adjust as needed).
ƶ Place the canopy (A) over the threaded tube (II), and screw the
screw collar loop (EE) onto the threaded tube (II).
ƶ Secure the canopy (A) using the ring (DD).
3
Assembling the xture body
ƶ Guide the xture wire with bare copper ground wire
through the loop (C), and screw the loop (C) onto the top of
the
xture body (D) securely.
ƶ Install the light bulbs (not included) into the sockets. Use
three 60-watt maximum medium base (E26) type A bulbs.
ƶ Adjust the three arms on the
xture body (D) to make an
equal distance between them.
ƶ Insert the cap assembly (H) through the triangle frame (G),
glass shade (F), plastic wahser (KK) and metal washer (LL),
then secure with the
nial (E) (Do not tighten).
ƶ Align the end of the arms and holes of the triangle frame (G)
and tighten with knob nuts (JJ)
NOTE: Do not twist the xture wire.
NOTE: You can also use three 13W maximum medium
base (E26) SBCFLs (sold separately). Do not exceed the
recommended wattage.
AA
BB
FF
HH
II
6
4
Attaching the chain
5
Weaving the xture wire
ƶ Adjust the chain (B) to the desired height by spreading the end
link of the chain (B) apart. Use a pair of pliers and a
screwdriver. Wrap a soft cloth around the pliers to protect the
chain’s nish.
ƶ Attach one end of the chain (B) to the screw collar loop (EE)
and the other end to the loop (C).
ƶ Unscrew the ring (DD) from the screw collar loop (EE), and
lower the canopy (A) and ring (DD) over the chain (B) on the
xture.
ƶ Weave the xture wires and bare copper ground wire up
through the chain (B), ring (DD), canopy (A), screw collar loop
(EE), threaded tube (II), and then into the outlet box.
6
Making the electrical connections
ƶ Strip 3/4 in. of insulation from the wire ends, and twist the
stripped ends together with pliers.
ƶ Connect the glossy/live wire from the xture to the black
wire from the outlet box, and the rough/neutral wire from the
xture to the white wire from the outlet box.
ƶ The bare copper ground wire from the xture must loop one
turn under the head of the green ground screw (CC) on the
mounting bracket (AA) before it is connected to the ground
conductor of the supply circuit.
ƶ Cover the wires with wire connectors (GG). Tape the wire
connectors (GG) and wires together, and carefully position all
wires inside the outlet box.
NOTE: The glossy/live wire has the text printed on it;
the rough/neutral wire has the ridge on it.
Installation (continued)
A
DD
B
EE
II
C
B
EE
AA
CC
GG
7 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
ƶ Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry, soft cloth to dust or wipe carefully.
ƶ To clean the xture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box, and use a dry or
slightly dampened, clean cloth to wipe the exterior surface of the xture.
Troubleshooting
Problem Possible Cause Solution
The lights will not turn on. The bulb is burned out. Replace the light bulb.
The power is off. Ensure the power supply is turned on.
There is a faulty switch. Test or replace the switch.
There is a faulty wire connection. Check the wiring.
The fuse blows, or the circuit breaker
trips, when the light is turned on.
There are crossed wires, or the power
wire is grounding out.
Discontinue use of the lamp. Check the wire connections.
Contact a qualied electrician or call the Customer Care Service
Team at 1-855-HD-HAMPTON.
Installation (continued)
7
Installing the canopy to the outlet
box
ƶ Raise the canopy (A) all the way up to the ceiling, and tighten
the ring (DD) onto the screw collar loop (EE) until the canopy
(A) is rmly held against the ceiling.
Care and Cleaning
A
DD
B
EE
8
MODEL: 16658
AA BB
CC DD EE FF
GG HH II JJ
KK LL
A B
C D
E
F G H
Service Parts
Part Description Part Description
AA Mounting bracket KK Plastic washer
BB Outlet box screw LL Metal washer
CC Green ground screw A Canopy
DD Ring B Chain
EE Screw collar loop C Loop
FF Hex nut (G 1/2 in.) D Fixture body
GG Wire connector E Finial
HH Lock washer F Glass shade
II Threaded tube (G 1/2 in.) G Triangle frame
JJ Knob nut H Cap assembly
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.
/
