Kenmore 58076100700 User manual

Type
User manual

This manual is also suitable for

OwneYs Manual
Manual dei Propietario
®
ROOM AIR CONDITIONER
ACONDICIONADOR DE AIRE DE VENTANA
Model, Modelo 580.76t 00
Distributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179
wv_f, seal_com
TABLE OF CONTENTS ........................2
WARRANTY ..............................................2
SAFETY, .....................................................3
ImportantSafety Instructions...................... 3
ELECTRICAL REQUIREMENTS .......4
INSTALLING THE POWER CORD .......4
iNSTALLATION ........................................5
Installation Requirements ......................... 5
Installation ................................................ 6
How to Install ............................................ 6
Removal from Window................................. 8
OPERATION .............................................9
How and Why........................................... 9
Normal Sounds ........................................ 9
Capacity and Running Time ..................... 9
Features ..................................................I0
Us{ngthe Air Conditioner ....................... .t0
ControlPanel..........................................11
Remote Control ...................................... 12
MAINTENANCE .....................................13
Air Filter Cleaning ................................... 13
Air Conditioner Cleaning ........................ 13
Howto Remove the Front Grille.................. 13
How to Replacethe Front Grille.................. 13
TROUBLESHOOTING .........................14
BeforeCallingforService......................14
ESPAI_OL ................................................15
MASTER PROTECTION
AGREEMENTS ......................................30
SERVICE NUMBERS ............Back Cover
FULL ONE YEAR WARRANTY ON
ROOM AIR CONDITIONER
For oneyear from the dateof purchase, whenthis
airconditioneris operatedand maintained for
normal room cooling accordingto theinstructions
inthis owner'smanual, Searswillrepair thisair
conditioner, free of charge,if defective in material or
workmanship.
FULL FIVE-YEAR WARRANTY ON
SEALED REFRIGERATION SYSTEM
For five years from the date of purchase, when this
air conditioner is operated and maintained for
normal room cooling according to the instructions
in this owners manual, Sears wilt repair the seated
refrigeration system (consisting of refrigerant,
connecting tubing, and compressor), free of charge.
if defective in material or workmanship.
WARRANTY SERVICE IS AVAILABLE BY
CONTACTING SEARS SERVICE AT
1-800-4-MY-HOME e.
Warranty coverage applies only to air condiSoners
used for non-commercial, private household
purposes.
This warranty applies only while this product is in
use in the United States.
This warranty gives you specific legal dghts, and
you may aLso have other right which vary from state
to state.
Distributedby Seam, Roebuckand Co,,
Hoffn"ranEstates, IL80179
-2-
IMPORTANT SAFETY INSTRUCTIONS
The safetyinstructionsbelowwilltellyou howto useyour roomair conditionertoavoidharmto yourselfor
damage toyour ROOMAlR CONDITIONER.
FOR YOUR SAFETY
Do netstoreor use gasolineorotherflammable
vaporsand liquids in thevicinityofthisor anyether
appliance,Readproductlabelsfor flammability and
otherwarnings.
PREVENT ACCIDENTS
To reducethe riskof fire,electr_c,al shock,or injury
to personswhenusingyourairconditioner,follow
basicprecautions,includingthe following:
Besurethe electrica!serviceisadequate forthe
modelyou havechosen.
. tfthe air conditioneristo be installed in a window,
youwillprobablywant tocleanboth sidesof the
glassfirst. Ifthe windowisatriple-tracktypewitha
screenpanelincluded,you may want to remove
the screencompletelybefore instaUation.
Be surethe airconditionerhasbeen securelyand
correctlyinstalledaccordingto the separate
installation instructionsprovidedwiththis manual.
Save this manual and insta{lationinstructionsfor
possiblefuture use inremoving orreinstallingthis
unit.
- Use gloves whenhandlingtheair conditioner.
Be carefultoavoidcutSfrom sharpmetalfinson
frontandrear coils.
ELECTRICAL INFORMATION
The completeelectrical rat}ngofyour new room air
conditionerisstatedon the serialplate, Referto the
rating whencheckingthe electricalrequirements.
. Be surethe air conditioner isproperly grounded.
To minimizeshockandfire hazards, proper
groundingisimportant.The power cordis
equipped withathree-pronggroundingplug for
protectionagainstshockhazards.
• Your airconditionermust be pluggedintoa
propedygroundedwall receptacle,Ifthe wall
receptacleyou intendtouseis notadequately
grounded orprotectedbya time delay fuse or
circuitbreaker,have aqualified alectrielan install
the properreceptacle.
, Do not runair conditionerwitha protective
covering.Thiscouldresult in mechanical damage
withinthe airconditioner.
, Do not use an extension cord or an adapter
plug.
Avoid fire hazard or electric shock.
Do not use an extension cord or an adapterplug.
Do notremoveanyprongfrom the powercord.
Test _ _
--3-prong
grounding
type wall
receptacle
ENERGY SAVINGIDEAS
=The capacityof the room air conditionermust fit
the room size forefficientand satisfactory
operation.
=Installthe room airconditioneronthe shadyside
ofyourhome,A windowthatfaces northis best
becauseitisshadedmostofthe day.
- Do not block air conditionerflowinsidewithblinds,
curtains,or furniture, or outside withshrubs,
enclosures,or otherbuildings_
- Closethe floor and wall registersand thefireplace
damperso cootair does notescape upthe
chimneyorintotheductwork.
oKeepblinds and drapes inother windows closed
duringthe sunniestpartof the day.
• Cleantheair filteras recommendedin the
MAINTENANCE sectionof thismanual
. Properinsulationand weather strippinginyour
homewillhelpkeep warmair out and cool air in,
,,External house shadingwithtrees, plantsor
awningswilthelp reduce the air conditioce¢swork
load.
Operateheat producingappliances suchas
ranges,washers,dryers, and dishwashers durfng
the coolest part of the day.
-3-
OBSERVE ALL LOCAL CODES AND
ORDINANCES.
DO NOT, UNDER ANY CIRCUMSTANCES,
REMOVE TH_ POWER SUPPLY CORD
GROUND PRONG.
ELECTRICAL GROUND iS REQUIRED ON
THiS APPLIANCE.
k 250-volt 60 Hz, kC onty, 20A fused and
properly grounded e_ectrica_ supply is required.
A time detay fuse or time deiay circuit breaker
is recommended. Use a dedicated circuit,
serving only this appliance.
DO NOT USE AN EXTENSION CORD.
RECOMMENDED GROUNDING METHOD
For your personal safety, this appliance must
be grounded. This appliance has a power
supply cord with a 3-prong grounding plug, To
minimize possible shock hazard, the cord must
be plugged into a mating grounding type wall
receptacle and grounded in accordance with
the National Electrical Code (ANSI/NFPA 70)
latest edition and all loca!codes and
ordinances, if a mating wail receptacle is not
available, it is the personal responsibility and
obligation of the customer to have a property
grounded 3-prong wall receptacle installed by a
qualified electrician.
115V~
2aOV~
Powercordmayinc|ude a currentinterrupter
dev*_.._.A test and reset buttot_is providedon the
plug_, The device shouldb_ tested on a
ped_dicbasis by f_rstpressing _heTEST butt_m
and_en the RESET"b_tton.Ifthe TEST button
does nott_ipor ifMe RESET buttonwill notstay
engaged, discontinue use of the air condIlionerand
contact0qu0#fied service techn_cien.
NOTE: The shape may be d;fferentaccording _eitsmodel
Use Wail Receptacle Power Supply
_I ,_ 5_andardt25V,
3-_re grouttdtng
receptaclerated
15A, 125VAC UseJ5AMP,_me
.................. de_y fLIse Or_5AMP,
Standard 250V, ,circuitbreaker.
a-w_m grounding
Ie_pt_t_ r_d
15A,?_50VAC
St_r_ord25or.
3-w_re grounding
_cept_c_on_ted
2:0_.._OV AC
Use;20AMP.t_e
de_ay_uBeor20AMP.
Electr|ca_ Shock Haza_
Plugintoa grounded 3 prong outlet.
Do notremove ground prong,
De notuse an adapter.
Do not use an extension cord,
Failure to f_low these inStruclJone can result tn
death fire or aieetdca_ shock
You canchoose between two methods below according toyour windowstool shape and preference.
USING SLIT "A"
Fastenthe stopperusing I screwholes,and tead
out the power cordthroughslit "A",
USING SLIT "B"
Fastenthe stopper using leftscrewhole, and rotate
prc_perfyto lead the power cord outthrough slit"B".
INSTALLATION REQUIREMENTS
Yoursir conditionerwillirrstalintostandarddoublehung
w_ndowswith_ctuatclearopeningwidthsof23to38inches
(584mmto914mm)(FIG,1),
Lowersashmust open sufficientlyto allow a e_eer
verticalopening of t_5inches(381mm), Side louvers
andthe rear ofthe alr conditionermust have clear
air spacetoallow enoughairflow throughthe
condenserfor heatremoval.The rear of the unit
must beoutdoors,not insideabuilding or garage,
I I /_-- Sash
,_ Exterior
lnlet_orw_1%J ..... ," RG, t
ELECTRICAL SERVICE
Check your availableelectrical service. The power
st@plyavalabte must bethe same as thatshown
on the unit nameplate (foundon dghtsideof Pab_net).
All models are equipped with a 3-prong service plug
to provide proper service and safe positive
grounding. Do not change plug in any w_y. Do not
use an adapter plug, if your present wal outlet does
not match your plug, c81 a qualfied electrician to
make the necessart correc4_ons,
SAVE CARTON and this OWNER'S MANUAL for
future reference. The Patton Is the best way to store
unit during wfnter or when not in use.
Toavoid riskof personal injury,property damage,
or product damage due tothe weightofthis
device and sharpedgesthat may be exposed:
Air conditioners coveredin thismanual posean
excessive weighthazard. Two or more peopfe
are needed to move and install the unit
To prevent injuryor strain, use proper lifting and
car_ing techniques when moving unit
. Carefu|ly inspect iocalonwhere air conditioner
willbe instaled. Be sure tt willsupport the
weightof the unt over an extended period of
time,
- Handle air conditioner withcare,Wear
protective gloves wheneverliftingor carryingthe
unit. AVOID the sharp motetfins of front and
rear coils.
, Makesure air conditioner does not fall during
installation.
INSTALLATION HARDWARE
NAME OF PARTS
A SIDE CURTAIN
B SILL SUPPORT
C BOLT
D LOCK NUT
E
F
G
H
I
J
2
2
2
2
SCREW: 25164" 13
SCREW: 5/8" 3
SCREW: 5/8" 5
FOAM STRIP 1
-- FOAM SEAL i......................
L BRACKET t 1
REQUIRED TOOLS:
=Tight Filing gloves
,' Standard screwdrive_
- Phillips screwdriver
, Pliers
- Sharp knife
3tSAnch open end wrench or adjustable wrench
. lt4-inch he× socket and ratchet
Tape measure
- Bectric drill
ll4-mch drill bit
-5-
INSTALLATION
Pick a location wh_h wi_lallow you to blow the cold
air into the area you want, Windows used for
installation must be strong enough to support the
weight of the air conditioner_ Gcod installation with
special attention to the proper position of the unit
wilt tessen the chance that service wi_tbe needed,
When cooling more than one room, instalta_on
location is very important. To coo! your morns, cold
sir must be blown from the sir conditioner in a
straight path.
HOW TO INSTALL
if the air conditioner is blacked by a storm
window frame, see step 19 o_npage 8 befo_e
bsglnnlng to install
_]1 Flemove the screws which fasten the cabinet at
both sides and at the back. Save side screws.
Discard b_ck screws.
p S_ide the unit out of the _abit'rat by gdpping the
ass pan handle and pull forward while bracing the
cabinet.
FiG. 4
_Cut the FOAM SEAL {iTEM 1)to fit the
underside of the window st,sh, Pee_ off the backing
and attach the FOAM SEAL as shown in Fig. 5.
FIG, 5
D insert the side curtain {ITEM A) into the upper
guide and towsr guide of the air cond_oner, Fasten
the curtains to the unit w_h screws (tTEM E},
ITEM5" RG. 6
_Open the window. Mark a line on cen_er of the
window inner sill,
Carefuliy place the cabinet on the window tuner sill
and align the center of cabinet front with the center
line marked in the window inner sill,
D PulI the bottom window sash down behin_ the
upper g_ide until they meet.
NOTE: Do not pull the window sash down so tightly
that the movement of side curla_nis restricted=
F_G. 8
_ Loosely assemble the silt supports using the
parts in FIG, 9,
_TEMB
ITEMC
FIG. 9
-6-
Q Select the pcsition that wifl place the silt supports
near the outermost point on sill(FIG. 10).
Attach the:sitl supports tothe cabinet track hole
ctosest to the selected position using screw (ITEM E).
O Place the s}i! supports with the cabinet on;the
window sill's selected position.
[]The cabinet should be inSt_lted with a very
slight tilt (about 1!4") downward toward the outside
(FIG. tl).
Adjust the bolts end the nuts of s_llsupports to leve_
the cabinet.
_TEMB F_G, 11
W Attach _ cabinet tothe inner sill by driving the
screws (ITEM F) through the Lower Guide i_o the
window inner sili (FIG. 12).
f _ _-_ kow0rGuide
_TEMB FIG. 12
_Pull each sidecurtainfully to each sideof
window opening,
Attach each side curtaintothe windowsash using
screws (ITEM G). (FIG. 13)
_ Attach the L BRACKET (ITEM J) with screw
(iTEM G). (F_G. _4)
FiG. 14
_ DRAINAGE
Be sure to Insert the drain pipe into base pan before
Instatlat_on.
The air conditfoner must be installed with a slightUtt
(_/4 ") downward to the outside for proper drainage of
excess condensed water t-}rough the drain pipe.
(FtG,is)
D'N_ -BASEPA'"EA" ]
_OTTOM F'G'" 1
_ Slide the chassis into the cabinet.
(F}G.
1
6)
CAUTION: For security purposes, reinstall side
screws you removed In step 1.
l
RG, 16
a_Out the:foam strip {ITEM H) to the proper length
insert between t_ upper window sash and the
lower window sash. (FIG. 17}
FIG. 17
_oThe vent control handle must be
straightened
re the decoretive front is attached.
Puli out part _ to align with part _3.
FiG. 1B
-7-
_ FRONT INSTALLATION
Instali the front grille(packed separately) onto. f_e
cabinet as follows:
Hook upper tabs of front grille intoslots on the
cabins top_ (FIG, 19}
= Push front gdlWs tips towards the cabinet in order
to snap side tabs intothe cabinet. {FIG. 19)
, Open the inlet grille. (FIG. 20)
, Install the ecr_t_ (ITEM E) through the front gri|te.
(FIG, 20>
- Close inletgrille. (FIG. 2i}
Front tnetatlatlo_
RG. 19
tl'£M -?_.
FrontInstallation
FIG, 20
Front installation
FIG. 21
_IF AIR CONDITIONER IS BLOCKED ;BY
STORM WINDOW FP,_ME
tf storm windowpresentsinterference,f_sten a 2"
widewoodstriptotheinnerwindowsillacrossthefull
widthofthesill Thewoodstripshouldbe thick
enoughto raise the heightof the windowsiilso that
the unit can beinstalledwithoutinterferencefrom the
thestormwindowframe.See FtG.P2.
Top of wood stripshould be approximately 3/4"
higher than the storm wir_ow frame to help
condensation to drain properly to the outside,
, Install a second wood strip (approximately 6° long by
1V2_wide and same thickness as first strip) in the
center ofthe outer sill _h against the back ofthe
inner sill Screw the L brackets intothis strip.
This will raise the L bracket as shown in FIG. 22.
11F,#mlr_.
WOODSTRIPMOUNTED {38mm_
ON TOP OF INNE-3'_SILL _ _ E3_,__,_
"I" I / #_"'_ WINDOW
_NNER ILBRACKET/ L FRAME
k I
J"=_l I ou_mE
FIG. 22
REMOVAL FROM WINDOW
Turn offand unplug the air conditioner.
Removethe front _Iie_ See HOW TO REMOVE THE
FROI'_ GF_ILLE,Refer to page t3,
Unscrew thesidescrewsthatyou installedinSt_,,p15.
Slide the air conditione_outof_e cabinet.
BE CAREFUL NOT TO DROP iT, Hold onto it _im_Iythe
_,vholewayslidingit ou_:.Once removed, set it safetyout
of theway,
Remove the L bracket from window frame and the sash
sealfrom betweenthewir_Iows.
- Unscrew thes,idecurtains from thewindowframe. Fold
thsm back to the s_es of thecabinet.
, Remove screws attaching cabinetto inner sill Be carefuI
not tolet cabinet fall once screws ate remo_,
Removecabinet from window opening.
Piece air conditioner intocabinet. Reinsta]_sidescrews
and FrontGrilie.
, Place unit _nd allassembly hardware in air conditioner
s_ipping carton, and store in ck_an,dr/piece.
, Air conditionerscovered in this m_nua_pose_n
excessiveweight hazard.Two or more people
are neededto moveand instal/the unit,
To preventinjury orstrain,use proper filling and
caring techniqueswhenmoving unit,
=Whenhandling the air conditioner, be carefu_to
avoid cutsf_omsharp metal fins on front and
rear colts,
• Make sure air conditioner does not _il during
removal.
-8-
HOW AND WHY
Your room air conditioner provides the following
functions to make hot weather I]ving more
comfortable:
Cools and circu{ates room sir,
- Lowers humidity by removing excess moisture.
, Fiite_ out aumtr_rtime dust, dirt, and some
airborne impurities,
The air conditioner performs these fun_ons by
drawing room air through a filter which traps dust
and dirt particles_ The air then passes over a
cooling coil which refrigerates the air and removes
excess moisture, The same air is then returned to
the room- cooter_ drier, and cleaner. Moisture
removed from the room air is carried to the outside
and evaporated_
Your sir conditioner is designed to be easy to
operate and to provide plenty of cooling power,
NORMAL SOUNDS FtG. ,3
Aside from the regular fan motor and:compn_ssor
sounds coming from your air conditioner, you will
once in s white hear a pinging sound. This is the
result of moisture being picked up from the air in the
room an_ thrown against the air conditioners fan,
This is normal and should not be cause for concern,
Also_ do not be alarmed if you hear a slight hissing
or gurgling sound coming from your air conditioner
after it is off. These are normal coolant noises.
CAPACITY AND RUNNING TIME
Proper unit size is important in deciding the desired
comfort for the area you want to cool The proper
size is determined by the number of square feet
in the area to be cooled, indoor and outdoor
temperature and hum{dlty.
Whenever the heat or humidity load is above: norms}
the air conditioner must run longer and more olten
to keep the desired temperature you have selected,
Under heavy heat icad conditions the a_rcenc_itioner
may need to run constantly to keep the temperature
you want,
At times using the MED FAN setting to circulate
room air may make it comfortable even though the
air is not being ccoied. This wdti decrease your cost
of use.
--Compressor
The mo_em high efficiency
compressor may have a high
pitched hum or pulsating
noise that cycles on andoff,
-- Unit Vibration
The unitmay vibrate
and make noise
because of poor wall
orwindow construction,
Fan
You may hear air
movement from
the fan,
-- Condenser
You may hear droplets ofwater hitting
the condenser causing a pinging or
clicklng sound,
FIG. 23
-9-
FEATURES
1 15 6 5 4 32714
F_G. 24,
1. Cabinet
2. Vertical Air
Direction Louvers
3. Horizontal Air
Direction Louvers
4. thtef Grille
5. Air FHter
6. Front Gdlle
7. Control Panel
8, Power Cord
9. EvaporatorCoiI
10, Condenser
11. Compressor
'_2.5ass pan
_3, Brace
"_4.Upper Guide
I5. Curtain
16, Remote Control
USING THE AIR CONDITIONER
To r_duce the r_k of fire, elec_c
shock, or injury to persons, read the important
SAFETY instructions sectionbefore operating this
applianos
To begin operating the air condltlorterafter
installation, foJ!ow these steps:
t. Plug in the air conditioner. (To prevent eiectrica_
hazards, do not use an extension cord or an
adapter piucj.)
2. Set the exhaust vent to the CLOSE position.
3. Set the TEMP Control to the coolest setting.
4. Set the MODE con+rot at the highest COOL level.
5. Adjust the louvers for comfortable air flow.
6. Once the room has cooled, adjust the TEMP and
Mode Control to the setting you find most
comfortable.
NOTE : If the air conditioner isturned off, wait 3
minutes before resta_ng. This attows prassurs
|r_6e the compressor to equalize. Failure to wait 3
minutes before restarting may cause inefficient
operation.
if you move the TEMP Control to a warmer, then
fmmediate_y back to a cooler setting, the unit will
shut off. WaN 3 minutes before restarting.
VENT CONTROL
The Vent Control aitows the air cottdltioner to
either r_c_rcuiz_e inside air (CLOSE) or exhaust
air to the outside (OPEN), (F_G, 25)
- The CLOSE position Ssused when maximum
coo|ing is desired, tt may also be us_d for a_r
recirculetton without cooling when the air
conditioner is set in the FAN position.
* The OPEN position removes sta_e air from the
room and exhausts it to the outside. Fresh air is
dr_wn into the room through your home's
norrna_ air passages.
* The OPEN or CLOSE position can be used with
any mode setsc_Jon.
PULL OPEN / PUSH CLOSE
FIG. 25
-_0-
CONTROL PANEL
- REMOTECONTROLSIGNALRECEIVER
J
T|MER
- SHUT-OFF TIME
- You w_llusuallyuse shut-offtime while you sleep,
- If unit isrunny, Uset_merto se_n_-nberof hoursuntilshut*off,
=Everytime youpushTimer bt_on, it advancesthe Timer
setting as foitows: 1Hourt_ 3 HoursF 6 Hours _,-I0 Hours
maximum.
- TEMPERATURE SETTING
"Use these buttons toautomatically controlthe
ternpera_ure ofthe room. The temperature
can be set to one of a temperature between
64°F to 82_F.
,,Push the TEMP up or down bettons to shi_t
the temperature settingfrom
B2_F_ 76"F _70"_F_64_F
--_- POWER
,,To t_m the airc_n_ner ON, pushthisbutton.
To turn theair conditioner OFF, push
_e button again.
,,Tt_s button takes prtedtyover arty other button.
,_Whe_y_ first turn}ton, the a_rco_enei" }son
the High coolmo_eand the Temp.a_70°F.
- STARTTIM_
oif unit_soff,Usetimertosetnumberof#oursbeforeunits_rts.
AUTO RESTART
,,Inthe ever_tof a powerfailure,
the unitwit{runatthe previous.
*,EverytimeyoupushT_merb_n, itadvancestheTimersettingasfollows:'_Hour_ 3Hours_ 6 H_rs _ 10Hours
m_Jm_m.
MODE
=Pushthis buttonto shiftthe mode ofoperation from COOL-HI_.COOL-LOWI_FAN ONLY-H!_ FANONLY-
LOW.
HORIZONTAL AIR DIRECTION CONTROL
Theh_dzo,nta_sirdirec_nisadjustedbymovingtheverticat
]curetstighta_ teftw_ your_gertips.(FIG.26}
VERTICAL AIR DIRECTION CONTROL
The vet'ticaiatrd_rsc_ionis adjusted bymoving thehodzun[a_
louversupsad dov_ withyour_r_rtips, (F_G.27)
-11 -
REMOTE CONTROL
NOTE: The Remote Control wi(_not operate properly if strong light shines on the sensor window of the Air
Conditioner or if there are obstaoles between the Remote Control and the Air Conditioner:
Ever/t_me you push but_n, you wil!hear a beep from the Air Conditioner.
POWER
°To turn the air cond_ormrON, push _Ls button. To turn theair condi_onerOFF_push the
button aga_n.Th_ button _kes _otity overanyother button.
When yo_ first turn _tan,the a_rconditioneris on the H_gh cool mo_ endthe Temp at
70"F
TEMPERATURE SETTING
Usethesebuttonstoau_maticalfycontrolthetemperatureof _ room,
Thetemperaturecanbesetwtthinarangeof64_Fto 82"F,
Pushthe TEMP upor down buttonstoshift the temperaturesettingfrom
8ZF I_76"FI_70"F_.6#F
TIMER
- SHUT-OFF TIME
* You willusualtyuse shuFoff _imewh_eyou sleep.
- If unit is running, Use Timer toset the number of hours untffshut-oil.
Push Timer bbttons to advancethe Timer settingas foi_ws:
I Hour('_ Hour-2 Hours)I_ 3 Hsers(3 Hout_ Hours)_ 6 Hours(6 Hours.9 Hours}
_" 10Hours max_n_m.
- START TiME
If unit isef_ Use De Timer to set the number of hours before unit starts.
, Push Timer buttons to advansethe "rimer settingas follows :
1 Hour('_Hour-2 Hours)_. 3 H_rs(3 Hours-5 Hours)t_-6 Hours(6 Hours-9 Hours}
10 Hours maximum.
MODE
Push this button to ehi_ the mode of operation from:
COOL-HI I_COOL-LOW I_ FAN ONLY-HI I_FAN ONLY-LOW.
HOW TO INSERT BATTERIES INTO REMOTE CONTROL
'!. Remove the coverfrom the back ofthe remote
contreIler.
- Open the cover according to the arrow direction on the
cover.
2. Inserttwo batteries.
=Be sure that the (+) and (-) direol_onsere correct.
, Be s_re that both batistes are t_v.
3. Re-attach the cover.
Donot use rechargeable batteries.
Such batteries differ from standard dr/cetis in shape,
dimensions, ancIpedormance.
Remove _ batteries from the remote controller if t_mair
cond_oner isnotgoingto be used for an extended
tength of time.
-12-
AiR FILTER CLEANING
The Air F_ltar will become dir_y as it removes dust
from the inside air. _tshould be washed at teast
every 2 weeks. If the A_rFt_ter remains fuU of dust,
the airflow will decrease arid the cooJingcapacity
witi be reduced, possthiy damagin_ the unit.
Pult the inlet gr_tfeforward, graspfng both l_bs,
then pull out the air fiJter. (FIG, 28)
- Wash the Air Fi_terunder the faucet with warm
water. Be sure to shake off all the water before
replacing the filter. (FIG.29)
FIG. 29
HOWTOREMOVETHEFRONTGRILLE
=Open the tnle_ gdlte,downward.
, Remove the screw securing the Front Grl_a.
- Push the grii_e up from the bo_tam and pu_lthe top
of the gdite away from the case to lift the tap tabs
out oftheir stats.
\
AIR CONDITIONER CLEANING
Cteanthe front gdlleand inletgrii_ebywipingwi_he
cloth dampened in a mild detsrgent sO_ion_(FIG30)
The cabinetmay be washed withmildsoap or
detergentand _ukewarmwater,then pe_ishedwith
liquid appliancewax.
To ensurecontinued peakemciency,the condenser
coils(outdoorsideat the unit)shouldbe checked
periodically and cieaned ifthey becomeclogged
with sootor dirtfrom theatmosphere,Brush or
vacuumexterior coils toremovedebds from fins,
HOW TO REPLACE THE
FRONT GRILLE
Attach the front gdlle to the cabinet by inser_jng the
tabs on the griIle into the s}ots on the front of the
cabinet. Push the gritte in un_l it snaps into p_ace.
FiG. 32
FIG. 30
-13-
BEFORE CALLING FOR SERVICE
Check the following list to be sure a service cal! is really necessary. A quick reference to this manual may
help you avoid an unneeded service call.
THE AIR CONDITIONER WiLL NOT OPERATE.
Check if..,
W=dtp!ug_ne_ed.
Housefuseblownorcircuitbreakertr;pped,
MODEselectorisOFFposlliorL
U_wasturnedoffand_ _ iceq_.
TEMP _l Ss_w'_rmer_ roomtamp_ratum.
Thecurrentinterrupterdeviceistripod
TherL..
Pushplugfirmlyintawallcutiet,
Re,ace fusewithtimedelaytypeorresetdrcu_breaker.
"rumMODEsetectertothedesiredCOOLsetgng.
Turnurdt_ be_orerestartir_g.
TurnI_MP Controtclockwisetoa coolersetting(highernumber).
Pressthe RESET buttonlocatedonthe power cordplug
if the RESET buttonwill not slay engaged,discontinue usa ofthe =dr
conditionerand contacta qualified servicetechnician,
AIR FROM UNIT DOES NOT FEEL COLD ENOUGH,
Check if... Then...
I MODEselectorinLOWCOOLpos_on. TurnsalectortoHIGHC_
I' TEMP _! settoowan'n(lowernumber)! I TurnTEMp_rd _ toa cooler_
....._ing rn_ notcocuruntilroomtempe _ above70_F(2193),
_ow 70oF(2! °0). Str_igh_ tube_wayfromevapom_rcoil.
I Temperaturasensingtubetouchingevaporatorcoil,
i locatedbehindfrontgdlle,
THEAIR CONDITIONERCOOLING,BUTROOMIS TOO WARM- ICEFORMINGON COOLING COILBEHINDFRONT GRILLF.
Check if.,. Then...
Outdcortemperaturebe_v 70_F(21°C). To defrostMecoil,setselectortoFAN_on. Then,turnTEMPcorf¢ol
counterclockwiseto awarmersetting,
Airfillermay bedirty. __'o-_M_se_'t ionofownersmanu=d,To_t,
setselectorto FANposition,
TEMPControlsetmoocoidfornight-timecor_ing. Todefrosttheco_,setsek_ortoaFANposiilon,Then,settheMODE
..... contmtatFANpos_onor9-_gh_ w_n_ TEMPcontroltoa vmrmerposi_on.
1HEAIRCONDIllONERCOOUNG'Bb'TR00ML_TO0 WAP_
Check if...
_ai[ ,res_cted, , ,_ airfilter,Referto Maintenancesectionofownersmanu=d.
I TEMP.Co_t__ttco.w,r_.
Frontofu_ js .[_ bydrapes,btinds,f_miture, '"{ Clear_e infret ofunit.
etc.Air_stribution_srestricted,
1 13oO=iwindows,registers,'e'm,open.Coktairescapes. Closedoors,windows,registers,etc.
I Unitrecopyturnedon nhotroom. Ali_additionst_metoremovestored__f_
THE AIR CONDITIONER TURNS ON AND OFF RAPIDLY.
Check if... Then,.,
L _ieml:_mtum isex_emelyhot j SetMODEonHK_Hspeedtobringairpastcoo_ingcoilsFaVor, j
NOISE WHEN UNIT IS COOLING,
Check if,, Then,,,
! Windowwbratior_-poorinstalla_n. I Raierto_s_ll_on _sttucttonsor checkwi_ J_r.
WATER DRIPPING INSIDE ROOM WHEN UNiT IS COOLING.
Check if... Then...
i The=dr_on_tionsrisimpmpedy_i,_d. Ti[tairc_ndi'i_'_ers_ig_ytotheoutsidetoallowweterd_. Referto ]
inst_ation[nstru_onsorcheckw_ installer,
J
WATER DRIPPING OUTSIDE WHEN UNIT IS COOLING.
Check If... Then...
Theunitisremov_ _ge quantitiesofme_e
fremh_.zmklrcom. 1 Thisisn°m'mldL_ngexcessivelyhumlddays' ]
-14-
Master Protection Agreements
Congratulations on making a smart purd'_asa.
Your new Kenmore ®product is designed and
manufactured for years of dependable operation.
But like at[ products, it may require preventive
maintenance or repair from time to time.
That's when having a Master Protection Agreement
can save you money and aggravation.
Purchase a Maser Protection Agreement now and
protect yourseff from unexpected hassle and
expense.
The Master Protection Agreement also helps extend
the life of your new product, Here's what's included
in the Agreement:
E_ Expert service by our 12,000 professional
repair spectalists
[_ Unlimited service =nd no charge for parts and
labor on aft covered repairs
[] "No=lemon" guarentce -replacement of your
covered product if four or more product failures
occur within twelve months
j_ Pier,duct replacement if your covered product
can't be fixed
[] Annual Preventive Maintenance Cheek at your
request - no extra charge
[_ Fast help by phone - phone support from a
Sears technician on products requiring in-home
repair, plus convenient repair scheduling
[]Power surge protection against electrical
damage due to power fluctuations
[_ Rental reimbursement if repair of your covered
product takes longer than premised
Once you purchase the Agreement, a simple phone
call is all that it takes for you to schedule service,
You can carl anytime day or night, or schedule a
service appointment online.
Sears has over I2,000 professional repair
specialists, who have access to over 4.5 million
quality parts and accessories. That's the kind of
professionalism you can count on to he;p prolong
the life of your new purchase for years to come.
Purchase your Master Protection Agreement today!
Some limitations and exclusions apply.
For prices and additions! information calf
1-800-827-665;5.
Sears Installation Service
For Sears professional installation of home
appliances, garage door openers, water
heaters, and other major home items, in the
U.S.A. call 1-600-4_MY-HOME ®
Acuerdos de Ptoteccibn Especiatit.ada
tEnhorabuenal Ha realizado one compraintellgonte.
Su nuavo aparsto Kenmore® est&dissuadey fabricado
paraofrecedeaPicsde bushfuncionamiento.
Sinembargo, a]iguatque todoslos productos,puede
precisar un rnantenimiento preventiveo inclusoalguna
reparaci_n de vez en cuando.En esasocas_,onee,un
Master ProteCtionAgreement puede ayudarloaaborter
dineroe inconvenientes.
Adquiera un Maser ProtectionAgreement ahora,y
pmt6jase a s! mismo de mo!es#as y gastos inesparados.
E1Master ProteCtionAgreement le ayudar_tambtdn a
prolonger favide de su nuevo aparato. Los siguientee
serviciosestdn incluidos:
[] Servlote experto per parts de cualqutera de
nuealtos ! 2.000 t&onicosprofesicnales espec_atistas
de Sears.
[_ Prestaci6n de sarvicios sin timltaciones y sin
eargarte tas plazaso ]amane de obrs an todaslas
reparaclonescubier_s par st acuerdo.
[] Garantfa saris de sust_uclbn de ias plazas del
productocubierto parel acuerdo,sicuatro o ads
piezas se mostrasen defactuosasen unperiodode
doce mesas,
[] Sustituoidn dsl producto per otto naevo, si et
defectuosono pudieser_pararse.
[] Control de mantenimienta anual preventive,
siempre qua Io deses y singustoadicienal aiguna.
[] Aeistencia talefbnica inmediats de un tdc_co
espec_atistaen productos qua hen de set reparadcs a
domicilio, adem&sde una progrsmact6nadecuada de
le reparsc'_n.
Pmt_'ci6n centre aublda_ de tensi6n qua
provoquendefies ei_ctricosdebidosalas
fluc'_acioneeen et suministm.
[] Reintegro del alqulier sila reparaci6nde{pmducto
Ileva m_s tiempo de1promtetido
Una vaz qua haya adquiddo et Agreement, no nacesitar&
rods queuna simplelfamada parasolicitore} servicio de
su aparato. Adam,s, pod_ hacerloan cualquier memento
dotdie o de ia noche, o sellout una cite pareprestaci6n
de serviciosonline.
Sears cuen_acon m_s de 12.000 t_cnicosprefesionales
aspecialistasan rsparaciones, con acceso a m_Lsde 4,5
miltones de plazas de sustituci6ny accesoriesde csiidad,
_ste ser_ elripede profesional_dady servic'_ con e_que
podr_ canterpareprolongerlavide de su nuevo producto
partouches a_. iAdquierahey mtsmo su Master
ProtectionAgreemenLP
Se aplicar_n algunas lim_taciones y
restrieclenas.
Sf desce hecar alguna consults sobre los
precios u otra infon'nacibn adiolonal, te rogareos
Ilame a! te|6fone 1-800_27_55,
Servicios de Instalacibn Sears
Pare so!foiler servicios de insta/acidn profesionales
de Sears de eiectrodom#.sticos, mandos de aperture
de puertas de garajes, calentadores de ague y arras
uparatos en ice Estados Unidos, puede flarnar a
1-800-4-MY-HOME ®
-30 -
_i:i:ii::i_i,ii:
!_i:_ii_ii_iiI_I:_:
:::,_:
_i_i:ii,il
: i'il i: !ilil¸
Your Home ':::
For repair- in your home-of all major brand appliances,
lawn and garden equipment, or heating and cooling systems,
no matter who made it, no matter who sold it!
For the replacement parts, accessories and
owner's manuals that you need to do-it-yourseE.
For Sears professional installation of home appliances
and items like garage door openers and water heaters.
1-800o4-MY-HOME _ (I-_00-4_.4r_3)
Call anytime, day or night (U,S.A. and Canada)
Our Home
For repair of carry-in items like vacuums, lawn equipment,
and electronics, call or go on-line for the location of your nearest
Sears Parts & Repair Center.
1=800-488-!222
Cal! anytime, day or night (U.S.A, only)
www.s_zrs,com
To purchase a protection agreement(U.S.A.)
or maintenance agreement(Canada) on a product serviced by Sears:
:_iii:i_i!i'
iiI
_"I,LL
i:,iiii!i_!,_,
1-800-827=6655 (U.S.A.) 1-800-361-6665 (Canada)
Para pedirservicio de reparaci6_ AU Canada pour service en fran_ais:
a dornicitio, y para ordenar plazas: 1.800.LE.FOYER_C
: ; 1-8B8=SU-HOGAR _ (_800-533-6937) :: :
!
(!,_88_784-6427) www_sears._a :
® Ra_te_ed Tradenlark I T_ Tmdats_ I _ Service M_ _ S_,,__. R_eb_k and _.
® M_rc.a _agist tad a ! T_ Mat__,ade F&btics ! s_ Mats_, de, ,Servicio de: Sears, Roebue, k and C_
Marque de cm_tnen_e / _ Ma_L_ d_po8_ de Seats. RoebuP._ and Co, © SeaP_ Brands. L_C
Part No_: 3828_210073
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

Kenmore 58076100700 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages