Miller PROHEAT AIR-COOLED OUTPUT CABLES Owner's manual

Miller
Brand
Miller
Model
PROHEAT AIR-COOLED OUTPUT CABLES
Category
Car kits
Type
Owner's manual

This manual is also suitable for

Miller PROHEAT AIR-COOLED OUTPUT CABLES

These cables are designed for use with Miller welding equipment and provide a safe and efficient way to connect your welder to your workpiece. The cables are air-cooled, which helps to prevent them from overheating and ensures a long service life. They are also flexible and easy to use, making them a great choice for a variety of welding applications.

Here are some of the features and benefits of Miller PROHEAT AIR-COOLED OUTPUT CABLES:

  • Designed for use with Miller welding equipment
  • Air-cooled to prevent overheating
  • Flexible and easy to use

Miller PROHEAT AIR-COOLED OUTPUT CABLES

These cables are designed for use with Miller welding equipment and provide a safe and efficient way to connect your welder to your workpiece. The cables are air-cooled, which helps to prevent them from overheating and ensures a long service life. They are also flexible and easy to use, making them a great choice for a variety of welding applications.

Here are some of the features and benefits of Miller PROHEAT AIR-COOLED OUTPUT CABLES:

  • Designed for use with Miller welding equipment
  • Air-cooled to prevent overheating
  • Flexible and easy to use
OWNER’S MANUAL
2011 MILLER Electric Mfg. Co.
OM-226 229D 2011−11
Use above FORM number when ordering extra manuals.
ProHeat Air-Cooled Output Cables (195 404, 195 405 And 300 362)
1. Safety Symbol Definitions
DANGER! − Indicates a hazardous situation which, if not
avoided, will result in death or serious injury. The possible
hazards are shown in the adjoining symbols or explained
in the text.
Have only trained and qualified persons install, operate,
or service this unit. Read the safety information at the
beginning of these instructions and in each section. Call
your distributor if you do not understand the directions.
For INDUCTION HEATING SAFETY and EMF informa-
tion, read owner’s manual(s).
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury. The possible ha-
zards are shown in the adjoining symbols or explained in
the text.
Beware of electric shock from wiring. Disconnect input
power before installing this kit. Reinstall all panels and
covers.
NOTICE
Indicates statements not related to personal injury.
Indicates special instructions.
Wear safety glasses with side shields.
CALIFORNIA PROPOSITION 65 WARNINGS
Welding or cutting equipment produces fumes or gases which contain chemicals known to the State of California to cause birth defects and, in
some cases, cancer. (California Health & Safety Code Section 25249.5 et seq.)
This product contains chemicals, including lead, known to the state of California to cause cancer, birth defects, or other reproductive harm.
Wash hands after use.
2. Tools Needed
OM-226 299 Page 2
3. Parts
! Turn off power source and
disconnect input power.
804 324-A
Description (Qty)
Part
No.
Item
No.
1 253 841 Connector Shell (1)
2 254 886 Coupling Collar (1)
3 221 099 Strain Relief Clamp (2)
4 136 343 Screw K50 x 20 (2)
5 254 887 Connector Shell (2)
6 224 259 Strain Relief Socket Clamp (4)
7 228 296 Screw KA35x10 (4)
8 197 635 Warning Label (2)
Be sure to provide Model and Serial Number
when ordering replacement parts.
1
2
4
3
8
5
6
7
  • Page 1 1
  • Page 2 2

Miller PROHEAT AIR-COOLED OUTPUT CABLES Owner's manual

Miller
Brand
Miller
Model
PROHEAT AIR-COOLED OUTPUT CABLES
Category
Car kits
Type
Owner's manual
This manual is also suitable for

Miller PROHEAT AIR-COOLED OUTPUT CABLES

These cables are designed for use with Miller welding equipment and provide a safe and efficient way to connect your welder to your workpiece. The cables are air-cooled, which helps to prevent them from overheating and ensures a long service life. They are also flexible and easy to use, making them a great choice for a variety of welding applications.

Here are some of the features and benefits of Miller PROHEAT AIR-COOLED OUTPUT CABLES:

  • Designed for use with Miller welding equipment
  • Air-cooled to prevent overheating
  • Flexible and easy to use
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers