2
User manual
1
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
Quick Start Guide
MC145
Quick Start Guide
Setup
Step A
Enjoy
Step B
Pull out the insulation
plastic sheet.
Remote Control
User manual
MC145 QUG_Eng 2005.12.19, 16:571
Setup
FM ANT
AC ~
110V
220V
Speaker
(right)
Speaker
(left)
AC power cord
FM antenna
1
2
Tip
It is unnecessary to
connect the FM pigtail
antenna since it is
fixed to the main unit.
Connection
1 Connect the speaker wires to the SPEAKERS terminals.
2 After ensuring all the above connections have been made, connect
the power cord of the system to the AC power outlet.
Setting the clock
1 In standby mode, press DISPLAY/CLOCK button..
The clock digits for the hours flash.
2 Press ¡1 / 2™ to set the hours.
3 Press DISPLAY/CLOCK again. The clock digits for the minutes flash.
4 Press ¡1 / 2™ to set the minutes.
5 Press DISPLAY/CLOCK to confirm the time.
MC145 QUG_Eng 2005.12.19, 16:572
Enjoy
Step B
Tip
Detailed playback features and additional
functions are described in the accompany
user's manual.
Playing a disc
1 Select CD source.
2 Press OPEN•CLOSE on the top of the system to open the CD door.
3 Inser t a disc with printed side facing up and press down
on OPEN•CLOSE to close the CD door.
4 Press 2; to start playback.
5 Press 9 to stop playback.
Auto programming radio stations
1 Press SOURCE (TUNER on the remote control) to select tuner source.
2 Press STOP/BAND (on the set) or TUNER (on the remote control)
once or more to select your waveband.
3 Press PRESET G / H (3 / 4 on remote control) to select the preset
number where programming should start.
4 Press PROG for more than 2 seconds to activate programming.
MC145 QUG_Eng 2005.12.19, 16:573
-
1
-
2
-
3
Philips MC145/05 Quick start guide
- Category
- Home audio sets
- Type
- Quick start guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Philips MC145/37 Quick start guide
-
-
-
-
-
-
-
-
-