24” LED TV
LED24FullHD
Contents
Front / Right Side View and Controls
Rear View and Sockets
OSD Menu
1
Installing Batteries in the Remote Control
. Picture Setting
2. Sound Setting
3. Channel Setting
4. Lock Setting
1
2
8-16
6noitarepO cisaB
8
9
10-12
13-14
15
18
19
20
19
18
Remote Control
3-4
5
Remote Control Operation Range
5
5. Time Setting
Viewing Photos
Listening to Music
Watching Movies
Viewing Texts
Specification
21
Stand installation guide
6. Option Setting 16
The manual is for reference only.If there is inconsistency between the
manual and the actual product, the actual product shall govern.
POWER
INPUT
1
INPUT
MENU
CH+
CH-
V0L+
VOL-
POWER
2
VGA
COAX
LNB(DVB-S2) To connect the Satellite signal.
DC To connect to power supply.
Connecting to the PC output jack a personal computer.
Digital output to AV receiver.
LNB(DVB-S2)
TV
USB
Common Interface
Mini
YPbPr
Mini
AV
PC
audio in
HDMI1 HDMI2
VGA SCART
DC COAX
Remote Control
PICTURE
S
SOURCE
OUND
REC T-SHIFT
4. : Stop (in USB mode).
3. : Play / Pause (in USB mode).
-/--
17. : Press button to toggle between the current and
the previous programme you were viewing.
-/--
ASPECT
EPG
♥
1
3
5
4
2
6
7
8
9
11
12
13
14
16
17 18
19
20
23
24
25
26
27
28
21
15
10
NOTE:
♦ All pictures in this manual are examples, only for reference, actual product may differ
from the pictures.
♦ The buttons not mentioned here are not used.
Definition of the buttons on remote control:
1. POWER: Enter or quit the standby mode.
9. PICTURE: Select the picture mode.
11. MENU: Press to display / disappear the on screen
menus or to quit some operations.
16. NUMBER BUTTONS: Use to choose channels.
(in TV mode)
13. EXIT: Quit the current interface.
27. REPEAT: Press to select the repeat play mode.
(in USB mode)
14. CH+/CH-: Scroll to next / previous channel.
19. VOL+/VOL-: Increase / Decrease audio volume.
20. INFO: Show info of current program.
21. ENTER: Select or confirm menu item.
23. SOURCE: Select signal source.
24. SOUND:Select the sound mode.
28. LIST: Press to call Channel List.(TV mode)
25. ASPECT:Press repeatedly to cycle through the
available aspect picture modes.
7. REC: To start recording.
15. EPG: Electronic Program Guide Display. Press
button to display Program Informations (DTV mode).
2. COLOR BUTTONS
8. T-SHIFT: Press to start TIME SHIFT function.
For more Info, please check chepter "TIME SHIFT"
Fast reverse (in USB mode)
Fast forward (in USB mode)
Previous (in USB mode)
Next (in USB mode)
Red/green/yellow/blue key navigation link.
5. SUBTITLE:Press button to display available
subtitle.(DTV mode)
6. : Press to display the Favourites program in
TV mode.(You should setup your favourite
channels in Program Edit menu)
♥
10. : Mute or restore sound.
12. / : Select direction.
22. / : Select direction.
18. : Return to last viewed program / signal source.
26. : The button can be used to switch among
DUAL / DUAL / DUAL + / MONO / stereo.
22
Remote Control
PICTURE
S
SOURCE
OUND
REC T-SHIFT
-/--
ASPECT
EPG
♥
1
3
5
4
2
6
7
8
9
11
12
13
14
16
17 18
19
20
23
22
24
25
26
27
28
21
15
10
NOTE:
♦ All pictures in this manual are examples, only for reference, actual product may differ
from the pictures.
♦ The buttons not mentioned here are not used.
Definition of the buttons on remote control:
Teletext Function:
20. INDEX Go to the index page.
6. REVEAL : Reveal or conceal hidden text for
quizzes etc.
4. HOLD : Retain the current teletext page and
again to cancel the function.
3. TEXT : Switch between teletext on,
mix and teletext off.
28 SIZE : Switch between zooming to the upper
half, lower half and in full.
5. SUBTITLE : Switch between secondary
pages by entering the four digit number.
27. CANCEL Cancel the teletext but not to exit
teletext, press again to show teletext.
16. NUMBER BUTTONS: Key in the alphanumeric
digits to go to the designated page directly.
22. / : Press / to scroll to the next / previous
page.
2. COLOR BUTTONS: Teletext Button.
PICT URE
S
SOURCE
OUND
REC T-SHIFT
-/- -
ASPECT
EPG
♥
1. If this is the first time you are turning on the TV and there are no programs in the TV memory, the Quick Start menu
will appear on the screen. There are 2 setups as follow:
6
Erstinstallation
Erstinstallation
OSD Sprache
Tv Anschluss
Land
Tuner Modus
Deutschland
Zurück
ENTER
Zurück
ENTER
Deutsch
Antenne
13
Antenna , Cable, Satellite, ATV, AV, SCART,YPbPr,PC,HDMI1,HDMI2,
Media Player.
LOCK
ENTER
ENTER
ENTER
ENTER
/
7
Input Source
Antenna
Cable
Satellite
ATV
AV
SCART
YPbPr
PC
HDMI1
HDMI2
Enter
ENTER
Input Source
Media Player
EnterENTER
PICTURE
Picture Mode Standard
Contrast 50
50Brightness
50Saturation
50Tint
50Sharpness
Color Temperature Normal
Aspect Ratio Auto
Noise Reduction Middle
Dynamic CR off
Enter
ENTER
Enter Select
Exit
Exit
Saturation Press the buttons to increase or decreases the saturation.
Auto
ENTER
ENTER
Normal
Normal
Menu
Sports
SPDIF Mode
Auto Volume This feature automatically adjusts the audio level when the TV is turned on.This function is activated by selecting”Off”.
Surround Sound
Turn on/off the surround sound function by selecting “Surround” or “Off”.
SOUND
Sound Mode Standard
120Hz 50
500Hz 50
1.5KHz 50
5KHz 50
10KHz 50
Balance 0
Auto Volume Off
Surround Sound Off
SPDIF Mode Off
Enter
ENTER
Enter Select
Exit
Exit
ENTER
ENTER
ENTER
Antenna
1. Press the Menu button and then press the buttons to select the
CHANNEL menu.
2. Press the
and then p
buttons
and then press the to select
the following channel options ress the button.
Allows you to set up a variety of channel options.
Auto Tuning
1.Press the buttons to Auto Tuning then press the
ENTER button to confirm.
2.In the Auto Tuing menu there are 2 options for you to
selet from:Tune Type and Country.
3.Press the Menu button to return back to the main menu.
4.Press the Exit button to exit the menu.
CHANNEL
Auto Tuning
DVB-T Manual Tuing
ATV Manual Tuing
Programme Edit
Signal Information
CI Information
LCN On
Software Update(USB)
Enter
ENTER
Enter Select
Exit
Exit
Antenna
ENTER
ENTER
Germany
Greece
Hungary Luxembourg Poland
Ireland Norway
Italy Netherlands
Tune Type ATV
Enter Adjust
MENU
Return
DVB-T Mannual Tuning
1.Select DVB-T Mannual Tuning,press the ENTER button to confirm.
Storage To 1 Press the buttons to change the numbered location of
the found channel.
ATV Mannual Tuning
ATV Mannual Tuning
NTSC.
Antenna
ENTER
ENTER
Frequency Unregistered
Programme Edit
Use up/down keys to select program edit.Press ENTER
to enter the menu.
Delete
Press the RED button to delete the highlighted channel,
a red circle will appear next to the cahnnel name.
Press the RED button again to confirm delete.
Press the MENU to return to the main menu.
Move
Press up/down to select the cahnnel,press yellow button
to enter the move mode,then press up/down to move the channel location,press yellow button again or press
ENTER to confirm.
Press MENU to return to the main menu.
Skip
Press up/down to select the channel you wish to skip.
press the BLUE button,a logo will appear next to the channel name and the channel will be skipped when you
scroll through the channels.
Press the BLUE button again on the highlighted channel to disable the skip function.Press MENU to return
to the main menu.
Signal Information
Only available in Antenna mode.
CI Information
When insert CI Module,display CI Information.
Software Update(USB)
1.Download the software to the usb device,then insert the usb device to the unit.
2.Press the menu button to select the CHANNEL menu.
3.Press the left/right buttons to select Software Update(USB) and then press the ENTER button to update
software.
4.When the updating is completed,the unit will be reset to standby mode.
Rename
Favorite
ENTER
FAV
Antenna
Lock Setting
Lock
Lock System
Lock System
Set Password: If you had already changed the password,enter the current password.
Block Program: This feature is available only for digital TV and the tuned-in channel must support it.
Key Lock:Press the buttons to select the “Key Lock” option and then press to choose
between the options ON or OFF.After selecting ON,the front panel buttons TV/AV/
Menu/CH+/CH-/VOL+/VOL- of the device will be locked.
LOCK
Lock System Off
Set Password
Block Program
Parental Guidance Off
Key Lock Off
Hotel Mode
Enter
ENTER
Enter Select
Exit
Exit
ENTER
ENTER
ENTER
ENTER
Lock Setting
Lock System
Press the up/down buttons to select the “Lock System”
Press the up/down buttons to select the “Parental Guidance” option and than press the right button to choose
between ON and OFF.
option and than press the right button to choose
between ON and OFF.
Hotel Mode
Press the up/down buttons to select the “Hotel Mode” option.
Set Password
Press the up/down buttons to select the “Set Password”
option and then press ENTER to enable the menu.
Block Program
Parental Guidance
Press up/down buttons to select the “Block Program”.
Key Lock
Press up/down buttons to select the “Key Lock ”.
LOCK
Lock System Off
Set Password
Block Program
Parental Guidance Off
Key Lock Off
Hotel Mode
Enter
ENTER
Enter Select
Exit
Exit
15
Time Setting
Time
Clock
Press the ENTER button to set date and time.
Off Time
Press the ENTER button to set off time.
On Time
Press the ENTER button to set on time.
Sleep Timer
The sleep timer automatically switches the TV to standby after the preset time has elapsed.The clock
will be set automatically when receiving a digital signal.Time must be set before using Sleep Timer function.
Press up/down buttons to select a period of time after which the TV automatically switches to standby mode:
OFF/10/20/.../180/240 min and then press the ENTER button to confirm.The timer begains to count down from
the number of minutes selected.
Auto Standby
The unit will automatically switch to standby mode 3/4/5/Off hours after the last time the remote control was
used.A reminder screen will pop up and count down before the unit switches to standby mode.If you want
to operate the TV for a long period of time,tun off the auto standby function by selecting Off.
Time Zone
When you select a Time Zone city,the TV time is set by the time off set information based on Time Zone and
GMT which is received with the broadcast signal and the time is set automatically by a digital signal.
Press the up/down/left/right buttons to select the desired time zone city and then press the ENTER button to
confirm.(Antenna mode)
OSD Timer
Press up/down buttons to select the display time of the on-screen menu:5s/10s/15s/20s/25s/30s/Off and
then press the ENTER button to confirm.
TIME
Clock 01/Jan 01:08
Off Time Off
On Time Off
Sleep Timer Off
Auto Standby 4H
Time Zone London GMT
OSD Timer 15 S
Enter
ENTER
Enter Select
Exit
Exit
ENTER
ENTER
Option Setting
Option
OSD Language
Allows you to select the on screen display menu language.
Audio Languages
Select the audio languages.The availability of this function depends on the tuned-in channel.(can only be
selected in Antenna mode)
Subtitle Language
Select the subtitle language.The availability of this function depends on the tuned-in channel.(can only be
selected in Antenna mode)
Hearing Impaired
Allows you to show more information in subtitles for the hearing-impaired in some programmes(can only be
selected in Antenna mode)
Reset
Restores all settings to the factory defaults.
First Time Installation
This option allows you to reset the TV to the default factory setting.Once activated the TV will go to standby mode.
Home Mode
Allow you to select among:Home/Max Economy/Max Brightness.
Blue Screen
Press left/right buttons to select ON or OFF
ENTER
ENTER
OPTION
OSD Language English
Audio Languages English
Subtitle Language English
Hearing Impaired Off
Reset
Home Mode Home
Blue Screen Off
Select Enter Return
ExitMENUENTER
Exit
First Time Installation
Multimedia Operation
Basic Operation
1.Press the SOURCE button on tje remote control to display the input source menu,select the USB source with
the up/down buttons and press the ENTER button to enter the Multimedia menu below.
2.Press left/right buttons to select the files on the USB device(PHOTO,MUSIC,MOVIE,TEXT)to view or play.
Return to main menu
Preview
File Information
Press the up/down/left/right buttons to select and the ENTER button to activate the file or open folder.Press
button to play the files in full screen mode.When in full screen mode press the ENTER button to show the
navigation option menu on the bottom of the screen or press stop button to return to files.
Input Source
Antenna
Cable
Satellite
ATV
AV
SCART
YPbPr
PC
HDMI1
HDMI2
EnterENTER
Input Source
Media Player
EnterENTER
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/