KitchenAid KDFX 6030 Installation guide

Montageanweisungen

Assembly instructions

Instructions de montage

Montageinstructies

Istruzioni di montaggio

Monteringsanvisningar

Monteringsinstruksjoner

Monteringsvejledning

Asennusohjeet

Монтажные инструкции

*

Page is loading ...

Hinweise ........................................................................................................................... 5

Montageanleitung ........................................................................................................ 17

Wartung und Reinigung .............................................................................................. 29

Precautions ...................................................................................................................... 6

Assembly instruction ................................................................................................... 17

Maintenance and Cleaning ......................................................................................... 29

Avertissements ............................................................................................................... 8

Instructions de montage ............................................................................................. 17

Entretien et nettoyage ................................................................................................ 29

Waarschuwingen ............................................................................................................. 9

Montage-instructies ..................................................................................................... 17

Onderhoud en reiniging .............................................................................................. 29

Avvertenze .................................................................................................................... 10

Istruzioni di montaggio ............................................................................................... 17

Manutenzione e pulizia ............................................................................................... 29

Varningar ....................................................................................................................... 11

Monteringsanvisningar ................................................................................................ 17

Skötsel och rengöring ................................................................................................. 29

Advarsler ....................................................................................................................... 12

Monteringsanvisning .................................................................................................... 17

Pleie og rengjøring ....................................................................................................... 29

Advarsler ....................................................................................................................... 13

Monteringsvejledning .................................................................................................. 17

Vedligeholdelse og rengøring ..................................................................................... 29

Varoituksia ..................................................................................................................... 14

Asennusohjeet .............................................................................................................. 17

Huolto ja puhdistus ...................................................................................................... 29

...................................................................................................... 15

.............................................................................................. 17

.......................................................................................... 29

........................................................................................................... 16

................................................................................................. 17

........................................................................................................... 29

AE

RUS

FIN

DK

N

S

I

NL

F

GB

D

Page is loading ...

1. Connecting to water mains

- Connections to the mains water supply must be carried out by a qualified technician in compliance with

the manufacturer’s instructions and applicable local safety regulations.

- All local Water Board regulations must be complied with. Water supply pressure: 0.03 - 1.0 MPa.

- The inlet hose must be securely clamped to the water tap to prevent leaks.

- The inlet water temperature varies according to the model installed. Inlet hose marked: "25°C Max": up

to a maximum of 25°C. Other models: up to a maximum of 60°C.

- Depending on the appliance model, the magnet valve of the inlet hose will be driven by the mains

voltage (see ** page 23).

- Make sure the inlet and drain hoses are kink-free and are not crushed.

- Fix the drain hose to the spigot with a clamp to prevent it from coming off during operation.

- On installation, make sure water can drain freely (take the spigot cladding off if necessary).

- Do not use old or damaged hoses. Use only the hoses provided or new ones, which can be requested

from the After-Sales Service.

- If hoses are not long enough, contact your local dealer.

- Do not cut hoses, and the plastic box containing the connection to the water mains in appliances with a

water cut-off system must not be under water.

- Before using the appliance for the first time, check water inlet and water drain for leaks.

2. Connecting to mains electricity

- All local Electricity Board regulations must be complied with.

- Voltage information is shown on the rating plate mounted inside the door on the right hand side.

- The appliance must be earthed as prescribed by law.

- Do not use extension leads or multi sockets.

- If necessary, the power cable may be replaced with an identical one that can be requested from our

After-Sales Service. The power cable must only be replaced by a qualified technician.

For Austria:

if the apparatus is series connected to a fault current switch, this must be sensitive to the pulsating current.

3. Assembly instructions

- During assembly, unplug the appliance from the mains.

- Set any electrical screwdrivers to a low torque.

- Leave at least 3mm between the top edge of the wooden door and the worktop.

- Do not seal gaps between the appliance and adjacent units / worktop (for example with silicone).

- Attention: When transporting and assembling the appliance, always wear gloves to protect

the fingers / hands from sharp edges and corners.

- If the appliance is installed at the end of a row of fitted units and touching a wall on one side, cover the

hinge area (available from the After-Sales Service).

- Be careful with uneven installation surfaces: regulate the foot height, push the dishwasher carefully

under the worktop.

- After fitting the decorative plates or plinth, before opening the door of the dishwasher, carefully check

if the plinth needs trimming and if so by how much (see page 27), in order to avoid damaging it.

- Protect the cutting edges of furniture units and baseboards from humidity (insulating material such as

silicone, not supplied).

4. General instructions

- The appliance must only be used in the household and according its purpose.

- Do not use the dishwasher until it has been fully assembled.

- Do not use the dishwasher if it has been damaged by transport. Contact the After-Sales Service or your

local dealer.

- Before cleaning or carrying out maintenance, switch off the appliance and turn off the water tap.

- All sizes in this maintenance and installation instruction are given in millimetres.

- Packaging varies according to the type of dishwasher .

GB

6

7

Warning - this appliance must be earthed

Fuse replacement

If the mains lead of this appliance is fitted with a BS 1363A

13amp fused plug, to change a fuse in this type of plug use an

A.S.T.A. approved fuse to BS 1362 type and proceed as follows:

1. Remove the fuse cover (A) and fuse (B).

2. Fit replacement 13A fuse into fuse cover.

3. Refit both into plug.

Important:

The fuse cover must be refitted when changing a fuse and if the

fuse cover is lost the plug must not be used until a correct replacement is fitted.

Correct replacement are identified by the colour insert or the colour embossed in words on the base of

the plug.

Replacement fuse covers are available from your local electrical store.

For the Republic of Ireland only

The information given in respect of Great Britain will frequently apply, but a third type of plug and socket

is also used, the 2-pin, side earth type.

Socket outlet / plug (valid for both countries)

If the fitted plug is not suitable for your socket outlet, please contact KitchenAid Service for further

instruction. Please do not attempt to change plug yourself. This procedure needs to be carried out by a

qualified technician in compliance with the manufactures instructions and current standard safety

regulations.

Electrical connection for Great Britain and Ireland only

Page is loading ...

Montageanleitung

Assembly instruction

Instructions de montage

Montage-instructies

Istruzioni di montaggio

Monteringsanvisningar

Monteringsanvisning

Monteringsvejledning

Asennusohjeet

AE

RUS

FIN

DK

N

S

I

NL

F

GB

D

17

Page is loading ...

Wartung und Reinigung

Maintenance and Cleaning

Entretien et nettoyage

Onderhoud en reiniging

Manutenzione e pulizia

Skötsel och rengöring

Pleie og rengjøring

Vedligeholdelse og rengøring

Huolto ja puhdistus

AE

RUS

FIN

DK

N

S

I

NL

F

GB

D

29

Page is loading ...

S N DK FIN RUS

5019 102 00475

Printed in Italy

n

11/08

*BIEN PENSÉ. BIEN FABRIQUÉ.

TM

D GB F NL I

AE

KitchenAid KDFX 6030 Installation guide

KitchenAid KDFX 6030 Installation guide

in other languages

Related papers

Other documents