Rowenta Intense pur air Connect Owner's manual

www.rowenta.com / www.tefal.com

INTENSE PURE AIR CONNECT

FR

EN

DE

PT

IT

ES

NL

PL

PU408x / PU608x

1800144706-03

Page is loading ...

14

DESCRIPTION

Product description

A Air quality indicator

B Adjustable air outlet grid

C Control panel

D Front door

E Handle

F Air inlets

G Particle sensor

H Gas sensor

I Power cord outlet

Control panel Lights

1 Lock control Panel

2 Filter change indicator

3 Timer/ delayed start

4 Mode display Auto Day /

Auto Night / Boost / silent

modes

5 Wi-Fi connection indicator

Control buttons

6 Light

7 Control Panel Lock

8 Filter Reset

9 Start / Stop

10 Timer / Delayed start setting

11 Automatic modes / filtration

speed selection

12 Wi-Fi Pairing Button

(hold 3 sec)

Read the instructions for use and safety carefully before use and

keep them for future reference.

SAFETY TIPS

It is essential that you read these instructions carefully and observe the following recommendations:

• For your safety, this appliance complies with the applicable

standards and regulations (low voltage, electromagnetic com-

patibility, environmental directives, etc.).

• This appliance should not be used by persons (including child-

ren) with reduced physical, sensory or mental capacities or lack

of experience and knowledge, unless they are supervised or

have been given instructions beforehand concerning use of the

appliance by a person responsible for their safety.

• Children should be supervised to ensure they do not play with

the appliance.

• The appliance can be used by children aged 8 and over and

persons with a lack of experience or knowledge or reduced

physical, sensory or mental capacities, provided they are super-

vised, have been trained on the safe use of the appliance and

are aware of the risks involved. Children must not play with the

appliance.

• If the power cord is damaged, it must be replaced by the manu-

facturer, its after-sales service or a similarly qualified person so

as to avoid any danger.

• Children should not clean or perform maintenance on the ap-

pliance without being supervised.

• For maintenance operations, please refer to the “Maintenance”

section.

• Keep the appliance and its power cord out of the reach of child-

ren aged under 8.

15

EN

• This appliance is designed for domestic use only. It should not be used for industrial purposes.

• The warranty will be invalidated if damage occurs due to incorrect use.

• Do not operate this appliance in a very dusty and/or humid place or in a location with fire ha-

zards.

• Before use, always make sure that the appliance, plug and power cord are in good condition.

• Never insert objects into the appliance (e.g. needles, etc.).

• Do not pull on the power cord or the appliance, even to unplug it from the wall power outlet.

• Unroll the full length of the cord before use.

VERY IMPORTANT

• Do not cover the air inlets or the outlet grid.

• Do not touch the appliance with wet hands.

• Never allow any liquid to enter the appliance.

• Never use the appliance in a humid place.

• Never use the appliance close to a heat source.

• Never place anything on the appliance or insert anything into it.

• Do not use the appliance close to ammable objects or products (curtains, aerosols, solvents, etc.).

• Never use the appliance in an inclined or horizontal position. Place the appliance on a at, stable sur-

face.

• In the case of prolonged absence: switch the appliance o using the button (9) and unplug it.

• Switch o and unplug your appliance before moving it.

• Unplug the air purier during assembly and cleaning.

OPERATING PRINCIPLE

The new Intense Pure Air purifier from Rowenta/Tefal enables you to breathe up to 100% pure air

in your home and protect your health with 4 filtration levels as described below. Each level is es-

sential and traps characteristic pollutants:

LEVEL 3:

ALLERGY+ FILTER

• Fine particles

(PM2.5)

• Pollen

• Dust mites

• Animal allergens

• Mold

• Bacteria / viruses

LEVEL 4:

NANOCAPTUR

FILTER

• Formaldehyde

LEVEL 1:

PRE-FILTER

• Dust

• Hair

• Fur

• Lint

LEVEL 2:

ACTIVE CARBON

FILTER

• Volatile organic

components

(VOCs)

• Odors / gases

16

« HOW TO ACHIEVE CLEANER INDOOR AIR »

In addition to using your Intense Pure Air purifier, here are some tips on how to im-

prove the quality of your indoor air:

• Ventilate the rooms for at least 10 min. every day, in summer and winter

• Maintain your ventilation system

• Limit the use of household products

• Do not smoke indoors

• Avoid home fragrances, incense sticks, scented candles, etc.

• Ventilate whenever any work is being conducted in your home and for several

weeks afterwards

• Avoid green plants that are allergenic or need frequent watering

WHERE TO INSTALL THE APPLIANCE

Place the purifier on a flat, stable surface in the room requiring treatment.

To allow the air to circulate freely, avoid placing the appliance behind curtains, below a window,

item of furniture or shelf unit, or close to any other obstacle, and leave at least 50 cm of free space

on each side of the appliance.

BEFORE USING THE APPLIANCE FOR THE FIRST TIME

Make sure that the plastic packaging protecting the lters has been removed before using the appliance.

Also make sure that:

• The voltage of your electrical installation corresponds to the one indicated on the appliance.

• Your appliance can be used with a power plug without an earth connection. It is a class II ap-

pliance (double electrical insulation),

• The appliance is positioned in the house as described above,

• The air inlet and outlet grids are completely unobstructed,

• Ensure the 4 filters and front panel have been correctly installed (see section titled filter assem-

bly/dismantling paragraph).

This appliance is fitted with a device that automatically prevents it from operating if the front door

is not correctly assembled.

Inserting and replacing the filters

This appliance is equipped with 4 types of lters:

Pre-filter Active carbon

filter

NanoCaptur

filter

Allergy+ filter

NB: For optimum performance of the appliance, only use filters provided by Rowenta/Tefal.

To replace the lters, follow the instructions in the section « Disassembling/Reassembling lters».

Please note: certain filters may emit a temporary slight odour, due to the transport and storage condi-

tions.

17

EN

SWITCHING THE APPLIANCE ON

Setting the pollution sensors

The appliance is preset to medium sensitivity.

If the air quality indicator remains:

– poor after 2 hours in operation although the air seems to be purified

– excellent for more than 1 hour although the air seems to be polluted

you can adjust the sensor sensitivity as follows:

1. When the air purifier is off, hold down the mode setting button for 3 seconds:

2. Set the sensitivity by briefly pressing the mode setting button:

+ Blue + Purple + Red

Low sensitivity Medium sensitivity High sensitivity

• Select high sensitivity if the air purier indicates excellent air quality for more than 1 hour although the air

seems to be polluted.

• Select low sensitivity if the air purier continues to indicate poor air quality even though it has been

operating for more than 2 hours and the air seems suciently puried.

3. Press ‘Start/Stop’ button to validate the sensitivity setting.

OPERATION

Start

Briefly press this button to switch the air purifier on or off.

Mode / filtration speed selection

Auto day

Automatic: In this operating mode, the filtration speed automatically adjusts according to the air

quality detected by the particle sensor and the gas sensor. This mode is recommended for general

use.

Auto Night

The filtration speed of your appliance is adjusted for a whisper quiet air flow during the night. The

light intensity of the appliance is also reduced. If pollution is detected, the filtration speed increases

slightly to purify your air but remains quiet to avoid disturbing your sleep.

Boost mode

The highest speed level of filtration.

Silent mode

The whisper quiet speed.

Light

You can change the light intensity of the appliance as you wish or according to the time of day.

18

Press Air quality indicator Control panel

1 Light up Light up

2 Moderate light Moderate light

3 Off Moderate light

Timer / delayed start

– Timer: When the appliance is on, you can use this button to define the operating duration.

Briefly press the button to select the number of operating hours desired (1, 2, 4 or 8) and the

appliance will automatically turn off at the end of the selected period.

– Delayed start: When the appliance is off, briefly press the button to set the appliance to turn on

in a certain number of hours (1, 2, 4 or 8).

3D pure air function (adjustable grid)

You can adjust the position of the air outlet grid manually, as desired. For an optimum, even flow

of purified air in the room, set the angle to 45°; for maximum comfort, set the angle to 90°.

Control Panel Lock

The lock system prevents the purifier from being accidentally mis-set during operation.

To activate it, press the button (7) for 3 sec until the locked control panel indicator turns on. To exit

this mode, press the button (7) again for 3 seconds, until the indicator turns off. When selected, the

other buttons are locked.

Wi-fi function

Frequency band operated : 2400-2483,50MHz

Maximum radio-frequency power : 18dbm

To turn on or off the Wi-Fi function on your purifier, hold simultaneously the Wi-Fi button and

the Light button during 3 seconds.

• When the Wi-Fi connection indicator flashes it means that the purifier losts its connection.

HOW TO CONNECT YOUR PURIFIER TO INTERNET ?

Download the app Pure Air & follow the instructions on your smartphone :

1. Sign in

Create your

Rowenta/Tefal

account if you are

new. Or log in the

app if you already

have an account.

2. Make Sure your phone is

connected to your domestic

Wi-Fi network

3. Turn your purifier on & hold

the Wi-Fi button during 3 sec-

onds

(your hear a «ding» and the Wi-Fi indicator

flashes to indicate that the Wi-Fi has suc-

cessfully been turned on.)

1

2

19

EN

4. Connect your phone to

the Wi-Fi of the purifier.

HOME WIFI

AIR PURIFIER XXXX

Autre...

5. Then come back to the app

& connect the purifier to your

domestic Wi-Fi network

HOME WIFI

AIR PURIFIER XXXX

Autre...

6. And you’re done !

The Wi-Fi indicator lights to in-

dicate that your purifier is well

connected to Internet.

In case of problem:

Check that your phone is well connected to your domestic Wi-Fi network at

the beginning of the process

Check that your purifier is well plugged and turned on

If the led of your purifier is not flashing, hold the Wi-Fi button during 3 se-

conds ?

Restart the product to retry.

I had trouble with the installation of the application:

Check compatibility on the website www.compatibility-pureair.rowenta.com or

www.compatibility-pureair.tefal.com

Pairing is not successful:

For the pairing, you need to be close to your air purifier and make sure that your Internet connec-

tion is good too.

If you can’t find the WIFI of your purifier ‘AIR PURIFIER XXXX’ ’:

• Check if the Wifi function is activated (the WIFI indicator flashes). If not, please press WIFI &

Light buttons simultaneously to activate the WIFI function.

20

• You need to press the WIFI button for 3 seconds, you will hear a ‘ding’ to indicate that the

wifi of purifier is activated.

• Check if someone else is already connected to the purifier. You can press ‘WIFI’ button for 3 se-

conds to re-start the connection steps.

I cannot control my purifier, why ?

If the WIFI indicator of the purifier is flashing:

1. check if your Internet connection at home is good

2. check if the password of your WIFI has been changed?

If the WIFI indicator of the purifier is lighted on, it means that the purifier is connected to the

network; in this case,

Check if your smartphone is well connected to internet ?

Can I share the purifier with someone else?

Of course! New users just need to download the App PURE AIR and create an account firstly.

Then there are 2 ways to share:

1. You need to enter in ‘My Devices’ , choose the purifier that you want to share, click on ‘share

by email’. Enter the email of the new user, click on ‘OK’

2. You need to enter in ‘my devices’, choose the purifier that you want to share; you can see the

‘QR code‘of your purifier.

The new user needs to enter in ‘my devices’, and click ‘+’ in order to add new product, choose

‘scan the QR code’. To scan the ‘QR code ‘on your screen.

The scheduling doesn’t work:

If the time slot is earlier than current time, by default the product will start next day.

Why the pairing didn’t work?

Supported encryption type : WPA_1/WPA_2, TIPK, PSK, AES,

Supported networks: 2.4 GHz (not 5Ghz)

If there is a problem with my home Wi-fi during my holiday period, I can’t

control my purifier via the app anymore ?

If the product lost its connection, the product will stop automatically after 24h.

MAINTENANCE

Always switch the appliance o with the button (9) and unplug it before conducting any maintenance

operation.

You can clean the appliance with a slightly damp cloth.

IMPORTANT: Never use abrasive products which could damage your appliance’s appearance.

FILTERS

Filter Action Cycles

Pre-lter Clean Every 2 to 4 weeks

Active carbon lter Replace Every 12 months

Allergy+ lter Replace Every 2 years

NanoCaptur lter Replace

Color changing

(see Color chart on filter)

This data is based on an average use in the appliance of 8 hours per day at the lowest speed of

AutoDay mode.

21

EN

The recommended frequency for cleaning and replacing the filters may vary depending on the

duration of use and the operating environment.

• A “PART” light indicates when the allergy+ filter needs to be replaced.

The ‘Odor’ light display indicates when the carbon filter needs replacing.

• The NanoCaptur filter contains translucent granules which change color according to the for-

maldehyde absorption rate. Refer to the color chart on the sticker inside the front door or the

filter itself to establish the filter saturation rate.Once the saturation rate has reached its maxi-

mum, the filter must be replaced. You have to check the filter saturation rate every six months.

• The pre-filter can be re-used: remove the dust using a vacuum cleaner or wash with water.

CAUTION:

• The appliance’s efficiency can be reduced if the pre-filter is not cleaned regularly.

• Never use a pre-lter that is still damp.

• The pre-lter is the only lter which can be re-used and washed with water. The particle, NanoCaptur

and active carbon filters cannot be cleaned and re-used. Never wash with water.

• To replace the lters, follow the instructions in the section « Disassembling/Reassembling lters».

Your replacement filters are available under the following codes:

Filtre Code PU408x Code PU608x

Allergy+ lter XD6074 XD6077

Active carbon lter XD6060 XD6061

Nanocaptur lter XD6080 XD6081

IMPORTANT: Resetting the lters

The reset light flashes when a filter needs to be replaced or cleaned (Prefilter). Once the filter has

been replaced, hold down the reset button for 3 seconds. .

Forced reset:

If you have replaced a filter before its end of life, force the reset of the filter replacement cycle:

1. Hold the reset button for 3 seconds. .

2. Press the reset button briefly to select the filter you have changed.

3. After selecting the filter to reset, hold the reset button for 3 seconds. The new filter life is then

reset.

4. If the reset filter button is not is activated for 10 seconds in forced reset mode, the reset mode

is canceled.

« TIPS FOR CHANGING FILTERS »

• Avoid handling used filters if you suffer from allergies or asthma.

• Wear gloves when changing the filters, or wash your hands well afterwards.

• Put used filters directly into a closed, air-tight bag before throwing them away to

avoid spreading pollutants.

POLLUTION SENSORS

The particles sensor and gas sensor (model PU608x only) need to be cleaned regularly (every 2

months) and appropriately.

Make sure you turn o and unplug the appliance before cleaning the pollution sensors and follow the

recommendations below:

1. Clean the air inlet and outlet using a soft brush or cloth.

2. Open the sensor cover located on the right-hand side of the appliance.

3. Lightly wet a cotton swab and remove any dust from the lens and the inlet/outlet. Wipe using

a dry cotton swab.

22

4. Clean the gas sensor using a soft brush or vacuum cleaner.

1

2

3 4

IMPORTANT:

• Never use a detergent or metal object to clean the sensors.

• The efficiency of the sensors may be reduced if not cleaned regularly.

• Cleaning frequency varies depending on the operating environment of the appliance. If it is

used in a dusty environment, clean the sensors more frequently.

STORAGE

When you are not using the appliance, store it in a cool, dry place.

IN THE EVENT OF A PROBLEM

• Never dismantle your appliance yourself. A poorly repaired appliance can cause risks for the

user.

• Check the troubleshooting table below before contacting an approved Service Center:

Problem Check Solution

The appliance will not

switch on.

Is the power cord connected?

Connect the power cord to a plug

with the correct voltage.

Are all the display elements off?

Press the start button and select

the required function.

Is there a power outage?

You can use your purifier once

the power turns on again.

Is the front door closed? Close the front door properly.

The air ow does not

change automatically.

Is the appliance in silent or boost

mode?

Select the correct operating

mode AutoDay or Auto Night.

The ow is a lot weaker

than before.

Does the filter need to be cleaned

or replaced?

Check the filter cleaning and re-

placement frequencies and clean/

replace the filter(s) if necessary.

There is an unpleasant

smell coming from the

air outlet.

Does the filter need to be cleaned

or replaced?

Check the filter cleaning and re-

placement frequencies and clean/

replace the filter(s) if necessary.

The air quality light does

not change color.

Is the sensor lens covered with

dust?

Clean the sensor lens.

Does the light still indicate poor

air quality?

Set the sensor sensitivity to

«low» or «medium».

Does the light still indicate ex-

cellent air quality?

Set the sensor sensitivity to

“high” or “medium”.

23

EN

WARRANTY

Contact an approved Service Center if:

• your appliance has been dropped

• your appliance or its power cord is damaged

• your appliance is not working properly

LET’S HELP PROTECT THE ENVIRONMENT!

 Your appliance contains valuable materials which can be recovered or recycled.

 Leave it at a local waste collection point or take to an approved service center so that it

can be processed.

Page is loading ...

Rowenta Intense pur air Connect, XD6077F0 Owner's manual

Related papers

Other documents