Provision-ISR BX-352CS User manual

Brand: Provision-ISR

Model: BX-352CS

Category: Security cameras

Type: User manual

The Provision-ISR BX-352CS is a high-resolution camera with a 1/3" SONY Super HAD sensor and a SONY DSP Chipset. It offers excellent image quality with 540TVL resolution and 0.05 LUX/F1.2 low-light sensitivity. The camera is equipped with AWB (Auto White Balance) and BLC (Back Light Compensation) for clear and stable images in various lighting conditions. It also features an electronic shutter, DC/VIDEO drive switch, and audio input. With its easy installation and durable construction, the Provision-ISR BX-352CS is a reliable choice for various surveillance applications.

www.provision-isr.com

Digital CCTV Camera

BOX CAMERA

www.provision-isr.com

AWB

BLC

CCD

Auto Iris

MANUAL

English / Spanish

General

Thank you for using our products. Before use, please read this manual

carefully to ensure correct use of this series of products. Please keep the

manual properly for future use.

This series of cameras take high-sensitivity CCD as the image sensor, all

circuits have long work life and high reliability. Excellent image will be top

choice for your camera.

Main Features

1. Easy to install and assemble.

2. High resolution, high sensitivity and high s/n ratio.

3. Low illumination, high quality image.

4. CCD sensor can prolong the work life of camera.

5. With SONY DSP and CCD chip, image is clear and stable.

Precautions

1. Do not install the camera in places where the temperature is

above 50°C or under -10°C.

2. Do not touch the CCD surface with your finger. If cleaning is

needed, please wipe it using a soft cloth with a little bit of

alcohol.

3. Do not install in places with high humidity, it can seriously

damage the quality of the picture.

4. Do not drop the camera and avoid physical shock.

5. Do not face your camera to a strong light, it can damage the

CCD.

6. Do not expose the camera to rain or dusty surroundings.

7. Its highly important to use the correct and suitable power

supply(DC12V) for the camera.

8. Only professional and qualified technician can install and test

9. During use, if any errors occur, cut off the power immediately

and contact your local distributor.

1 2

English Manual

Manual en Español

Content

Note:

In order to avoid electrical

shock or re, please use

proper power according to

the manual.

WARNING

Note: Only professional technicians is

allowed to open the front or back cover

of this camera.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Nota:

Para prevención de choques

electricos o fuego, por favor

use la corriente apropiada,

acorde con el manual.

ADVERTENCIA

NotA: Solo técnicos profesionales

pueden abrir las cubiertas frontal o

posterior de esta cámara.

PELIGRO DE CHOQUES

NO ABRIR

2. Case D

Tailplate

Mount screw

Lens

Back focus screw

Lens mount ring

Microphone

DC 12V

DC 24V

3 4

Tailplate Sketch

1. Case B

Tailplate

Mount screw

Lens

Back focus screw

Lens mount ring

Microphone

EN EN

Structure and Components

Tailplate Sketch

Structure and Components

Details:

Electronic Switch

IRIS- Electronic shutter speed- default AUTO

On- Auto electronic shutter between 1/5-1/10000

Off- Fix electronic shutter set for 1/50

BLC- Back Light Compensation- default OFF

Adjusts the image to compensate for areas that are

overshadowed caused by majority of brighter areas.

AGC- Auto Gain Control- default HIGH

Increasing the video signal when there is low amount of light

to achieve a brighter image.

AWB- Auto White Balance- always ON

DC/VIDEO Drive Switch

Socket Auto Iris Lens

Video out

Lens Level Knob

Power Supply Socket

Power Indicator Light

Audio Socket

Confirm that the power supply for the camera is correct.

Connect “Video out” of the camera to the monitor or other

video equipments (DVR) with a 75 ohm cable (RG59).

When using Auto Iris Lens, please make sure that on the

"Electronic shutter switch” is "ON".

(a) If the Lens is DC driven, switch "DC/VIDEO" should

be switched to DC, and the optimal image effect can be

achieved via adjusting "Level Knob" .

Operation Steps

5 6

3. Case H

Tailplate

Mount screw

Lens

Back focus screw

Lens mount ring

EN EN

Tailplate Sketch

Structure and Components

System connection

7 8

BNC

DC 12V

Monitor

MULTIPLEXER

Video Divider

DVR

VCN

SN Video Control Power Supply Control

1 +12V DAMP-

2 NC DAMP+

4 GND DRIVE-

3 VIDEO DRIVE+

Equip with automatic aperture lens. The definitions of the pins of the

control cable are as follows (e.g. Tail Plate Sketch)

Automatic Aperture

(b) If the Lens is VIDEO driven, then the switch "DC/VIDEO"

should be switched to VIDEO position.

(6)

EN EN

9 10

EN EN

SONY DSP Chipset

330g

PAL:537 H ×597 V NTSC:537 H ×505 V

0.5 LUX/F1.2

AWB ON (ATW OFF PUSH) Switchable

110L x 60W x 55H mm

1/3” SONY Super HAD 1/4” SONY Super HAD

BX-425CS

BX-325CS

SONY DSP Chipset

PAL:795(H)x596(V)

NTSC:811(H)x508(V)

PAL:537(H)×597(V)

NTSC:537(H)×505(V)

0.05 LUX/F1.2

DC 12V or DC12V/AC24V Dual Voltage (Opcional)

0.02 LUX/F1.2

AWB

1/3” SONY Super HAD

BX-322CS

BX-352CS

540TVL

SONY HQ1

320g

105L x 66W x 52H mm

Camera Specication Camera Specication

Page is loading ...

Provision-ISR BX-352CS User manual

Brand: Provision-ISR

Model: BX-352CS

Category: Security cameras

Type: User manual

Download PDF

report

in other languages

español: Provision-ISR BX-352CS Manual de usuario

Provision-ISR BX-352CS User manual

Provision-ISR BX-352CS User manual

in other languages

Related papers

Other documents