Monster 133219-00 User guide

Category
Mobile headsets
Type
User guide

This manual is also suitable for

AirTalk
Hands-Free Kit
User Guide
What’s Included
AirTalk
Hands-free Kit
USB Charging Cable
User Guide
Premium Visor Clip
ENGLISH
ENGLISH
General Specifications
Bluetooth
®
v2.1
Profiles: Hands-free Audio (HFP) and Headset Profiles (HSP) for
hands-free calling capability
Range up to 33ft (10m)
Compatibility
Connects to all mobile devices, like iPhone or Blackberry, with Bluetooth 2.1
and previous versions (see General Specifications for profile support).
ENGLISH
ENGLISH
Warning
Do not remove or attempt to remove the battery. It was not meant to be
removed by users and poses danger of explosion if tampered with.
Use in a car may pose a risk because of danger of AirTalk Hands-free Kit
flying around during an accident. Make sure to clip to the sun visor
to decrease risk.
Should not be exposed to excessive heat, like direct sunshine. Removal from
your car or placement in a compartment in your car is recommended to
avoid excessive heat in a closed car.
AirTalk
Hands-free Kit Features
Super Clear Calls
Noise cancelling mic and exceptional audio reproduction for clean
and clear calls
Bluetooth Connectivity
Connect to your iPhone, Blackberry, or other Bluetooth enabled mobile phone
for hands-free calling. Automatically reconnects with compatible devices
Ultimate Convenience and Easy to Use
Space-saving design with premium sun visor clip for quick install and
removal plus clearly labeled buttons: call, answer/end, volume, mute,
and power
ENGLISH
ENGLISH
Advanced Durable Materials
Resists extreme in-car heat and cold for heavy-duty use and long life
Long-lasting Power
Rechargeable Lithium polymer battery for more than 24 hours of talk time
and 2 months of standby time
Convenient Charging
Included Mini USB charging cable
You Can Use it Anywhere
Not just for in the car. Use at home or in the office for conference calls
Product Description
1. Power (On & Off) Button
2. Mic Mute (On & Off) Button
3. Call (Answer) Button
4. Volume Up Button
5. Volume Down Button
6. Mini USB Charging Port
7. Ear Set Jack
8. Microphone
ENGLISH
ENGLISH
1 2 3
4
5
6
7
8
Charging AirTalk
Hands-free Kit
1. Plug the USB mini connector of the USB charging cable into the Mini USB
charging port on the AirTalk Hands-free Kit.
2. Plug the other end of the USB charging cable into other devices that will
charge, like a computer or USB Car Charger (not included). The red LED light
on the device turns off when charging is complete.
ENGLISH
ENGLISH
Turning on AirTalk
Hands-free Kit
Press and hold for 2 to 3 seconds to turn AirTalk Hands-free Kit on.
Press and hold for 5 seconds to turn off.
Putting AirTalk
Hands-Free Kit into Pairing Mode and
Connecting with a Bluetooth-Equipped
Mobile Phone
1. Make sure to turn on AirTalk Hands-free Kit. Place it within a meter of your
mobile phone and activate the mobile phones Bluetooth function.
2. Press and hold
button for 7–8 seconds until the LED light rapidly flashes
blue and red alternately.
3. Consult your Bluetooth-equipped mobile phone’s manual, as connection
varies by device. When prompted, enter the passkey “0000 (four zeroes).
AirTalk Hands-free Kit will beep twice when connected and then the blue LED
light will flash once every 10 seconds.
ENGLISH
ENGLISH
Using AirTalk
Hands-free Kit
Answering a Call
Press and release either the
button, button, or button once
to accept a call.
Ending a Call
Briefly press
button to end a call.
Redial Last Number Called
[dependent on the mobile phone]
Press and hold
button for 2 to 3 seconds until you hear two beeps.
Your mobile phone will redial the last number called.
NOTE: The redial function may vary by phone model. Some phones simply display
the last number dialed, which requires you to hit the button twice. Consult your
owner’s manual.
Using AirTalk
Hands-free Kit (cont.)
Voice activated dialing
Press and release
button until you hear a beep. Say the registered
name on the voice dialing list of your mobile phone. For best voice dialing
performance, record the voice tag in your mobile phone.
NOTE: Voice activated dialing function varies by device. Please consult your
mobile phone’s manual for dialing set-up and functionality.
Adjusting the volume
Press
or
button to increase or decrease the speaker volume.
Mic mute on and off
To mute the mic so the person you’re talking to won’t hear you, push and
release the
button. Repeat to turn mic back on.
ENGLISH
ENGLISH
Transferring a call between AirTalk Hands-free Kit
and your mobile phone
In order to transfer a call from AirTalk Hands-free Kit to your mobile phone
or vice versa, Press
button for 2–3 seconds.
Call waiting
To answer the 2nd call without hanging up the 1st call, press
button
for 2 to 3 seconds. To return to the 1st call, press
button for 2 to 3
seconds again.
Rejecting a call
When AirTalk Hands-free Kit is ringing, press
button for 2 to 3 seconds.
Using AirTalk
Hands-free Kit (cont.)
Auto-reconnecting
If your AirTalk Hands-free Kit and mobile phone fall out of range (33 ft/10 m),
they can automatically reconnect if both come back into range within
30 minutes. The auto-reconnect signal emits in 2 minute intervals for
30 minutes. After 30 minutes out of range, the AirTalk Hands-free Kit will
automatically be turned off.
ENGLISH
ENGLISH
Všeobecné technické údaje
Bluetooth® v2.1
Profily: Hands-free zvukové (HFP) a headset Profily (HSP) pre možnosť
telefonovania hands-free
Dosah až do 10 m
Kompatibilita
Slúži na pripojenie väčšiny mobilných telefónov vybavených funkciou Bluetooth
2.1 alebo podobnou, ako sú iPhone alebo Blackberry® (podpora profilov je
uvedená v časti Všeobecné technické údaje).
SLovENSký
SLovENSký
© 2011 Monster, LLC.
7251 West Lake Mead Blvd., Las Vegas, NV 89128, USA
Monster Cable International Ltd.
Ballymaley Business Park, Gort Road, Ennis, Co. Clare, Ireland
1 / 1

Monster 133219-00 User guide

Category
Mobile headsets
Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Ask the document