Dometic RH418NTE, RH418NTEG Operating instructions

RH418NTE, RH418NTEG

Minibar

Installation and Operating Manual. . . . . . . 10

Minibar

Montage- und Bedienungsanleitung . . . . .22

Minibar

Instructions de montage

et de service . . . . . . . . . . . . . . . . . . . . . . . . .35

Minibar

Instrucciones de montaje y de uso . . . . . . .48

Minibar

Instruções de montagem e manual de

instruções . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Minibar

Istruzioni di montaggio e d’uso . . . . . . . . . 74

Minibar

Montagehandleiding en

gebruiksaanwijzing . . . . . . . . . . . . . . . . . . .87

Minibar

Monterings- og betjeningsvejledning . . . .99

Minibar

Monterings- och bruksanvisning . . . . . . . .111

Minibar

Monterings- og bruksanvisning. . . . . . . . 123

Minibaari

Asennus- ja käyttöohje . . . . . . . . . . . . . . . 135

Мини-бар

Инструкция по монтажу и эксплуатации 148

Minibar

Instrukcja montażu i obsługi. . . . . . . . . . . 161

Minibar

Návod na montáž a uvedenie

do prevádzky. . . . . . . . . . . . . . . . . . . . . . . 174

Minibar

Návod k montáži a obsluze . . . . . . . . . . . 186

Minibár

Szerelési és használati útmutató . . . . . . . 198

EN

DE

FR

ES

PT

IT

NL

DA

SV

NO

FI

RU

PL

SK

CS

HU

REFRIGERATION

CLASSIC

RH418NTE-RH418NTEG-IOM-EMEA16.book Seite 1 Donnerstag, 5. Dezember 2019 3:32 15

Page is loading ...

EN

Explanation of symbols RH418NTE, RH418NTEG

10

Please read this manual carefully before starting the device. Keep it in a

safe place for future reference. If the device is passed on to another

person, this manual must be handed over to the user along with it.

The manufacturer cannot be held liable for damage resulting from improper usage

or incorrect operation.

Contents

1 Explanation of symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

2 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

3 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

4 Technical description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

5 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

6 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

7 Cleaning and maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

8 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

9 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

10 Disposal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

11 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

1 Explanation of symbols

!

A

WARNING!

Safety instruction: Indicates a hazardous situation that, if not avoided,

could result in death or serious injury.

CAUTION!

Safety instruction: Indicates a hazardous situation that, if not avoided,

could result in minor or moderate injury.

NOTICE!

Indicates a situation that, if not avoided, can result in property damage.

RH418NTE-RH418NTEG-IOM-EMEA16.book Seite 10 Donnerstag, 5. Dezember 2019 3:32 15

EN

RH418NTE, RH418NTEG Safety instructions

11

I

2 Safety instructions

!

WARNING! Failure to obey these warnings could result in death

or serious injury.

Electrocution hazard

• Do not operate the cooling device if it is visibly damaged.

• If this cooling device's power cable is damaged, it must be replaced

by the manufacturer, customer service or a similarly qualified person in

order to prevent safety hazards.

• This cooling device may only be repaired by qualified personnel.

Improper repairs can lead to considerable hazards.

Fire hazard!

• When positioning the device, ensure the supply cord is not trapped or

damaged.

• Do not locate multiple portable socket-outlets or portable power

supplies at the rear of the device.

Health hazard

• This device can be used by children aged from 8 years and above and

persons with reduced physical, sensory or mental capabilities or lack

of experience and knowledge if they have been given supervision or

instruction concerning use of the device in a safe way and understand

the hazards involved.

• Children shall not play with the device.

• Cleaning and user maintenance shall not be made by children without

supervision.

• Children aged from 3 to 8 years are allowed to load and unload

cooling devices.

Explosion hazard

• Do not store any explosive substances such as spray cans with a

flammable propellant in the cooling device.

NOTE

Supplementary information for operating the product.

RH418NTE-RH418NTEG-IOM-EMEA16.book Seite 11 Donnerstag, 5. Dezember 2019 3:32 15

EN

Safety instructions RH418NTE, RH418NTEG

12

!

CAUTION! Failure to obey these cautions could result in minor or

moderate injury.

Electrocution hazard

• Before starting the cooling device, ensure that the power supply line

and the plug are dry.

• Disconnect the cooling device from the power supply

– before each cleaning and maintenance

– after every use

Health hazard

• Please check if the cooling capacity of the device is suitable for storing

the food or medicine you wish to cool.

• Food may only be stored in its original packaging or in suitable

containers.

• Opening the cooling device for long periods can cause significant

increase of the temperature in the compartments of the device.

• Clean regularly surfaces that can come in contact with food and

accessible drainage systems.

• Store raw meat and fish in suitable containers in the device, so that it is

not in contact with or can drip onto other food.

• If the device is left empty for long periods:

– Switch off the device.

– Defrost the device.

– Clean and dry the device.

– Leave the door open to prevent mould developing within the

device.

A

NOTICE! Damage hazard

• Check that the voltage specification on the type plate corresponds to

that of the energy supply.

• Connect the cooling device with an AC connection cable to the AC

power supply.

• Never pull the plug out of the socket by the cable.

• The cooling device is not suitable for transporting caustic materials or

materials containing solvents.

• The insulation of the cooling device contains flammable cyclopentane

and requires special disposal procedures. Deliver the cooling device

at the end of its life-cycle to an appropriate recycling center.

RH418NTE-RH418NTEG-IOM-EMEA16.book Seite 12 Donnerstag, 5. Dezember 2019 3:32 15

EN

RH418NTE, RH418NTEG Intended use

13

• Do not use electrical devices inside the cooling device unless they are

recommended by the manufacturer for the purpose.

• Do not place the cooling device near naked flames or other heat

sources (heaters, direct sunlight, gas ovens etc.).

• Risk of overheating!

Ensure at all times that there is a minimum of 50 mm ventilation on all

four sides of the cooling device. Keep the ventilation area free of any

objects that could restrict the air flow to the cooling components.

Do not place the cooling device in closed compartments or areas with

none or minimal air flow.

• Ensure that the ventilation openings are not covered.

• Do not fill the inner container with ice or fluids.

• Never immerse the cooling device in water.

• Protect the cooling device and cables against heat and moisture.

3 Intended use

The cooling device is suitable for cooling beverages and snacks.

The device is designed for use with AC mains supply.

The cooling device is intended to be used in household and similar applications

such as

• staff kitchen areas in shops, offices and other working environments

•farm houses

• clients in hotels, motels and other residential type environments

• bed and breakfast type environments

• catering and similar non-retail applications

!

4 Technical description

The cooling device can cool products and keep them cool. A grid divider can be

used to separate foodstuffs, e.g. bottles and sweets. The cooling system is a thermo-

electric cooling with a Peltier element.

CAUTION! Health hazard

Please check if the cooling capacity of the device is suitable for storing

the food you wish to cool.

RH418NTE-RH418NTEG-IOM-EMEA16.book Seite 13 Donnerstag, 5. Dezember 2019 3:32 15

EN

Installation RH418NTE, RH418NTEG

14

4.1 Control elements on the cooling device

4.2 Remote control

5 Installation

!

A

The cooling device is designed for free-standing installation, but can be built-in if the

following conditions are complied with to ensure satisfactory operation and maxi-

mum cooling efficiency.

No. in

fig. 1, page 3

Description

1 Door opening sensor

2 Interior light

3 Automatic door control LED (optional)

4 Door lock

No. in

fig. 2, page 3

Description

1 Red button: Resets the door control monitor

2 Black button: Low inside temperature (two different levels possible)

3 Yellow button: High inside temperature

4 Blue button: Medium inside temperature

WARNING! Fire hazard!

• When positioning the device, ensure the supply cord is not trapped

or damaged.

• Do not locate multiple portable socket-outlets or portable power

supplies at the rear of the device.

CAUTION! Health hazard

To avoid a hazard due to instability of the device, it must be fixed in

accordance with the instructions.

NOTICE! Risk of damage

Do not use extension cords or ungrounded (two prong) adapters.

RH418NTE-RH418NTEG-IOM-EMEA16.book Seite 14 Donnerstag, 5. Dezember 2019 3:32 15

EN

RH418NTE, RH418NTEG Installation

15

• The cooling device must be levelled carefully to ensure proper function.

• For the glass door version: When the ambient humidity is above 65 % at 25 °C

ambient temperature, moisture will condense on the door.

• The socket outlet for the mains connection must be freely accessible.

5.1 Changing the decorative plate

➤ Change the decorative plate as shown (fig. 3, page 4 to fig. 6, page 4).

5.2 Reversing the door

➤ Reverse the door as shown (fig. 7, page 5 to fig. 0, page 5).

I

For versions with automatic door control, proceed as follows:

➤ Pull out the LED (fig. 1 3, page 3).

➤ Lay the cable in the guide.

➤ Insert the LED on the device‘s foot on the other side.

5.3 Fixing the cooling device

Ventilation (fig. a, page 6)

• Ventilation must be provided as shown in alternatives A, B, C or D.

• Ventilation grills (1), if used, must have openings of at least 200 cm² each.

• The minimum clearance between the cooling device‘s back and the surrounding

structure should be as follows:

• The ventilation duct must at least measure 105 mm x the width of the cooling

device.

• The entire cooling unit must project into the ventilation duct as shown.

NOTE

The LED of the automatic door control (optional) must always be located

opposite the door hinge.

No. in

fig. a, page 6

Min. distance

220mm

3105mm

RH418NTE-RH418NTEG-IOM-EMEA16.book Seite 15 Donnerstag, 5. Dezember 2019 3:32 15

EN

Operation RH418NTE, RH418NTEG

16

• Air passing through the ventilation duct must not be preheated by any source of

heat.

• The ventilation duct must be kept free from any obstacles. Especially portable

multi socket outlets or portable power supplies, which can get warm, must not

be kept at the rear of the cooling device.

➤ Fix the cooling device through its fixing feet as shown (fig. b, page 7).

5.4 Mounting the sliding hinge (optional)

You can mount a sliding hinge that allows the cooling device door to be opened at

the same time as the door of the built-in cabinet.

➤ Mount the sliding hinge as shown (fig. c, page 7 to fig. f, page 8).

6Operation

!

I

6.1 Energy saving tips

• Choose a well ventilated location which is protected from direct sunlight.

• Allow warm food to cool down first before placing it in the cooling device to

keep cool.

• Do not open the cooling device more often than necessary.

• Do not leave the cooling device open for longer than necessary.

CAUTION! Health hazard!

Food may only be stored in its original packaging or in suitable

containers.

NOTE

• Before starting your new cooling device for the first time, you should

clean it inside and outside with a damp cloth for hygienic reasons

(please also refer to the chapter “Cleaning and maintenance” on

page 19).

• A few water drops may form inside the cooling device if it has been

cooling for a lengthy period. This is normal because the moisture in

the air condenses to water when the temperature in the cooling

device falls. The cooling device is not defective. Wipe it out with a

dry cloth if necessary.

RH418NTE-RH418NTEG-IOM-EMEA16.book Seite 16 Donnerstag, 5. Dezember 2019 3:32 15

EN

RH418NTE, RH418NTEG Operation

17

6.2 Using the cooling device

!

A

➤ Place the cooling device on a firm base.

➤ Connect the connection cable to the AC mains supply.

✓ The cooling device starts cooling the interior.

➤ If you wish to switch the cooling device off, pull out the connection cable.

➤ Clean the interior to make sure it is dry enough.

6.3 Setting the temperature

The cooling device is equipped with an automatic temperature regulation function.

With the optional remote control (fig. 2, page 3) you can adjust the temperature to

four different levels. Three buttons on the remote control the temperature settings.

•Black button (2): Low inside temperature (two different levels possible)

• Yellow button (3): High inside temperature

•Blue button (4): Medium inside temperature

With each press of the buttons on the remote control, the cooling temperature

switches between the possible values. By pressing a button, a red LED illuminates on

the remote control.

WARNING! Suffocation hazard

If children climb into unused cooling devices and close the door behind

them, they can suffocate inside the device.

If you are not going to use the cooling device for a long time, take the fol-

lowing precautionary steps:

• Remove the door.

• Leave the shelves in place so that children cannot easily climb inside.

NOTICE! Damage hazard

• Ensure that the objects placed in the cooling device are suitable for

cooling to the selected temperature.

• Ensure that food or liquids in glass containers are not excessively

refrigerated. Liquids expand when they freeze and can therefore

destroy the glass containers.

• Ensure that your cooling device is well ventilated so that any heat

created can dissipate. Otherwise proper functioning cannot be

ensured. It is especially important not to cover the air vents.

RH418NTE-RH418NTEG-IOM-EMEA16.book Seite 17 Donnerstag, 5. Dezember 2019 3:32 15

EN

Operation RH418NTE, RH418NTEG

18

I

8

➤ Remove the plastic insulation from the battery holder before initial use.

➤ Align the upper side of the remote control to the LEDs of the interior light

(fig. 1 2, page 3). Maintain a distance of approx. 10 cm.

➤ Press the desired button:

6.4 Locking the door (optional)

➤ Turn the key a quarter turn to the left to lock the cooling device (fig. g, page 9).

6.5 Using the automatic door control (optional)

The automatic door control (optional) displays via an LED (fig. 1 3, page 3) that the

door has been opened.

If the door opening monitor LED is lit:

➤ Open the cooling device.

➤ If necessary, refill the cooling device.

➤ Reset the door control monitor with the remote control (optional).

– Hold the remote control towards the door opening sensor (fig. 1 1,

page 3).

– Press the red button once (fig. 2 1, page 3).

➤ Close the cooling device.

NOTE

The red LED illuminates as soon as a signal has been sent out. Check the

batteries if the LED does not illuminate.

Button

(fig. 2 page 3)

Inside temperature LED signal

Black button (2)

Press once: Low level The LEDs of the interior light

flash at high speed.

Press twice: Lowest level (maxi-

mum performance)

Yellow button

(3)

High level (minimum perfor-

mance)

The LEDs of the interior light

flash at low speed.

Blue button

(4)

Medium level The LEDs of the interior light

flash at medium speed.

RH418NTE-RH418NTEG-IOM-EMEA16.book Seite 18 Donnerstag, 5. Dezember 2019 3:32 15

EN

RH418NTE, RH418NTEG Cleaning and maintenance

19

6.6 Defrosting the cooling device

The cooling device is equipped with an automatic defrosting function.

7 Cleaning and maintenance

!

A

➤ Use a soft cloth, lukewarm water and a mild detergent to clean the inside of the

cooling device.

➤ Wash out the cooling device using clean water and dry thoroughly.

➤ At annual intervals, remove dust from the cooling aggregate at the back of the

cooling device using a brush or a soft cloth.

8 Troubleshooting

General troubleshooting

WARNING! Electrocution hazard

Always disconnect the device from the power supply before you clean

and service it.

NOTICE! Damage hazard

• Never clean the cooling device under running water or in dish water.

• Do not use abrasive cleaning agents or hard objects during cleaning

as these can damage the cooling device.

Problem Possible cause Suggested remedy

The cooling is poor. Too much food was put

in.

Remove some food.

Door is not closed

properly.

Close the door.

Internal air circulation is

restricted.

Provide internal air circulation.

RH418NTE-RH418NTEG-IOM-EMEA16.book Seite 19 Donnerstag, 5. Dezember 2019 3:32 15

EN

Warranty RH418NTE, RH418NTEG

20

9Warranty

The statutory warranty period applies. If the product is defective, please contact your

retailer or the manufacturer's branch in your country (see back page).

For repair and warranty processing, please include the following documents when

you send in the device:

• A copy of the receipt with purchasing date

• A reason for the claim or description of the fault

10 Disposal

➤ Place the packaging material in the appropriate recycling waste bins wherever

possible.

M

If you wish to finally dispose of the product, ask your local recycling centre

or specialist dealer for details about how to do this in accordance with the

applicable disposal regulations.

There is no cooling. Plug is not properly

connected to the mains

socket.

Put the plug into the mains socket

properly.

There is no voltage in

the mains socket.

Establish voltage.

Problem Possible cause Suggested remedy

RH418NTE-RH418NTEG-IOM-EMEA16.book Seite 20 Donnerstag, 5. Dezember 2019 3:32 15

EN

RH418NTE, RH418NTEG Technical data

21

11 Technical data

Contains fluorinated greenhouse gases

Hermetically sealed equipment

RH418NTE RH418NTEG

Gross capacity: 20 l

Connection voltage: 100 – 240 Vw

Power consumption: max. 51 W

Temperature range: 0 °C to +12 °C

Energy consumption (ambient

temperature +12 °C to +25 °C):

81 kWh/annum 104 kWh/annum

Usable capacity: 18 l

Climate class: N

Refrigerant: R134a

Refrigerant quantity: 210 g

Global warming potential (GWP): 1430

Dimensions (W x H x D): 422 x 435 x 350 mm

Weight: 10kg 13kg

Testing/certification:

RH418NTE-RH418NTEG-IOM-EMEA16.book Seite 21 Donnerstag, 5. Dezember 2019 3:32 15

Page is loading ...

YOUR LOCAL

SALES OFFICE

dometicĶ ,*ű0)"0Ŗ,= "s

YOUR LOCAL

DEALER

dometic.com/dealer

YOUR LOCAL

SUPPORT

dometic.com/contact

dometic.com

 *+-)"1")&01*#*+"1&  *+-,&"0ķ4%& % *+-/&0"1%"*+"1& /*2-ķ ,"#*2,!&,1%"-2)& 9)&,$0*#ĸ

DOMETIC GROUP AB"+3E/,0$1,ĉčŖĉďĉčČ*),4"!",

4445102869 01/2020

RH418NTE-RH418NTEG-IOM-EMEA16.book Seite 212 Donnerstag, 5. Dezember 2019 3:32 15

Dometic RH418NTE, RH418NTEG Operating instructions

This manual is also suitable for

Dometic RH418NTE, RH418NTEG Operating instructions

in other languages

Related papers

Other documents