Page is loading ...
The Yaasa
Adjustable Bed
Owner’s Manual
02 // YAASA ADJUSTABLE BED OWNER‘S MANUAL 03YAASA ADJUSTABLE BED OWNER‘S MANUAL //
Safety 01
IMPORTANT SAFETY INSTRUCTIONS
This manual is designed according to UL 962 Standard for Household and Commercial Fur-
nishing and contains safety instructions. The operator of the product is obligated to read this
manual. The individual persons themselves are responsible to observe the safety instructions.
Furthermore, important notes about accident prevention can be found here.
GENERAL SAFETY INFORMATION
Generally, the following safety regulations and obligations are valid when handling the system:
▪ The system may only be operated in proper working condition.
▪ It is forbidden to remove, change, bridge, or bypass any protection, safety or monitoring
devices.
▪
It is forbidden to reconstruct or modify the system without written approval by the supplier.
▪ Only genuine spare parts may be used for repair.
▪ All repair work must be performed by authorized personnel only.
▪ All protection, safety and monitoring devices have to be checked regularly by the oper-
ator and maintained
▪ The national employee protection regulations and the national safety and accident pre-
vention regulations are valid.
▪ Only perform hardware changes in de-energized state (it does not matter if it is the power
cable, remote control or other components).
▪ Always make sure no children, animals are in the proximity of the bed when operating it.
▪ Ensure no person or object is in the way of moving parts (e.g. night stand or open window).
▪ Do not sit on any of the moving parts when operating the bed (laying on the bed flat is ok).
CONTENT
01. SAFETY .......................................................................................................................................................................... 03
02. INTRODUCTION ...................................................................................................................................................... 12
03. BOX CONTENTS ..................................................................................................................................................... 14
04. ASSEMBLY .................................................................................................................................................................. 16
05. DISASSEMBLY AND TRANSPORTATION ............................................................................................. 26
06. OPERATION ................................................................................................................................................................28
07. CLEANING AND MAINTENANCE ............................................................................................................... 30
08. UNUSUAL BEHAVIOR AND SOLUTIONS ............................................................................................31
09. TECHNICAL DATA ................................................................................................................................................. 34
10. FINAL DISPOSAL ...................................................................................................................................................34
COPYRIGHT®
This original documentation is protected by copyright. All rights, especially the right of repro-
duction and distribution as well as translation, are reserved. No part of this manual may be
reproduced by any mechanical, electronic or other means, in any form, without prior written
permission of Yaasa Studios Inc. All violations involving copyright may result in legal action.
2017 Yaasa Studios Inc.
04 // YAASA ADJUSTABLE BED OWNER‘S MANUAL 05YAASA ADJUSTABLE BED OWNER‘S MANUAL //
06 // YAASA ADJUSTABLE BED OWNER‘S MANUAL 07YAASA ADJUSTABLE BED OWNER‘S MANUAL //
INTENDED USE
The Yaasa Adjustable Bed may solely be used for the intended use according to this documentation.
The Yaasa Adjustable Bed is an electrically controlled bed base. It is operated by a remote control.
Additionally, it contains one USB module on each side to charge mobile devices such as smart
phones or tablet PCs. It is designed for indoor use only. Outdoor use is forbidden. This bed is not
suitable for potentially explosive atmosphere.
HOSPITAL / MEDICAL DISCLAIMER:
This bed is NOT designed for hospital or medical use (in-home or commercial) and is NOT
designed to meet medical or hospital standards. Do not use this bed with TENT TYPE oxygen
therapy equipment or use near explosive gases.
This bed may only be used with a suitable mattress. All used mattresses shall comply with the
Federal Register 16 CFR Part 1633. Check with your mattress manufacturer if it is compatible
with electrically adjustable beds. This bed is not suitable for water bed mattresses. It is not in-
tended to be used without a mattress.
This system is intended to be assembled and used by adults only. It is not designed for children
or animals.
The recommended weight limit (including mattress) is 700 lbs evenly distributed across the bed.
The head and foot sections of this product are not designed to individually support or lift this
amount of weight. For optimal performance, consumers should enter and exit the adjustable base
only when it is in flat (horizontal) position. Avoid placing entire weight on head or foot section, es-
pecially when in elevated position. Do not stand on the base at any time. Note: Exceeding the rec-
ommended weight restrictions could damage the product and void the warranty.
Any usage other than described in this manual is only allowed after written consent by
Yaasa Studios.
Unintended use or improper operation can result in personal injury and/or damage to the system.
Furthermore, liability and warranty claims become void in case of unintended use.
REASONABLY FORESEEABLE MISUSE
The Yaasa Adjustable Bed shall not be used in the following way:
▪ Do not use the bed as a climbing aid.
▪ Do not jump on the bed.
▪ Do not let children or animals climb on or under the bed.
▪ Do not use the bed without a mattress.
TARGET GROUP AND PREVIOUS KNOWLEDGE
This manual is addressed to adults. The following conditions are necessary:
▪ Basic technical knowledge.
▪ Ability to lift the components.
▪ Reading and understanding this manual.
SIGNAL WORDS USED IN SAFETY INSTRUCTIONS
DANGER
Imminent danger to life of persons
A safety notice containing the signal word DANGER indicates an imminent danger for life and
limb of persons!
Failure to observe these safety instructions can result in death or serious damage.
WARNING
Danger of injury to persons (serious injury) and in addition possible material damage.
A safety notice with the signal word WARNING indicates a dangerous situation which could have
consequences for the health of persons!
Non-compliance with these safety instructions can result in serious injury.
NOTICE
This icon with the word NOTICE indicates the availability of supporting information for installation,
operation and maintenance. Non-observation of these references may lead to property damage.
CAUTION
Danger of personal injury (minor injuries) and in addition possible material damage
A safety instruction with the signal word CAUTION indicates a potentially dangerous situation.
Non-compliance with these safety instructions can result in minor injuries.
▪ Do not overload the bed (max. 700 lbs evenly distributed).
▪ Do not continuously move parts of the bed up and down.
NOTICE
The bed is not designed for continuous operation.
Wait one minute after each complete driving cycle.
08 // YAASA ADJUSTABLE BED OWNER‘S MANUAL 09YAASA ADJUSTABLE BED OWNER‘S MANUAL //
RESIDUAL RISKS
Although the highest diligence was taken during construction and assembly of the system and
all safety relevant issues were observed, some risks that were evaluated in a risk analysis may re-
main. In this chapter, all residual risks and warnings which result from the risk analysis are listed.
Read all instructions before using this bed.
DANGER
To reduce the risk of electric shock:
Always unplug this bed from the electrical outlet before cleaning.
WARNING
Do not immerse any connection cables or any parts of the bed in liquid.
WARNING
To reduce the risk of burns, fire, electric shock, or injury to persons:
1. Unplug from outlet before putting on or taking off parts.
2. Close supervision is necessary when this bed is used by, or near children, invalids or disabled
persons.
3. Use this bed only for its intended use as described in these instructions. Do not use attach-
ments not recommended by manufacturer.
4. Never operate this bed if it or any parts has a damaged cord or plug, if it is not working prop-
erly, if it has been dropped or damaged, or dropped into water. Return the bed for examina-
tion and repair or replace it.
5. Keep cord away from heated surfaces.
6. Never drop or insert any object into any opening.
7. Do not use outdoors.
8. Do not operate where aerosol (spray) products are being used or where oxygen is being ad-
ministered.
9. To disconnect, turn all controls to the off position, then remove plug from outlet.
10. Risk of injury – keep children away from extended foot support (or other similar parts).
11.
Risk of electric shock – connect this furnishing to a properly grounded outlet only. See Ground-
ing Instructions.
WARNING
This bed can withstand maximum evenly distributed load of 700 lbs. Do not overload the sys-
tem under any circumstances. Neither foot or head rest can withstand the maximum load alone.
WARNING
Sitting on moving parts is forbidden as it may lead to property damage and injury. It is ok to lay
on the bed during movement.
CAUTION
If children are present, child lock must be activated.
DANGER
It is forbidden to crawl under the bed. Moving parts can lead to serious injury or death.
DANGER
Never reach under the bed during operation. Moving parts may lead to serious injury or death.
CAUTION
It is forbidden to store foreign objects under the bed.
WARNING
Make sure no foreign objects (e.g. nightstand or window) are in the way when operating the bed.
CAUTION
Do not grab the side rails by moving parts. Always grab them by the rigid frame.
CAUTION
Do not tilt the assembled bed upright to move it.
WARNING
Disconnect the power supply before connecting or disconnecting any components. Otherwise
electrical hazards might arise.
10 // YAASA ADJUSTABLE BED OWNER‘S MANUAL 11YAASA ADJUSTABLE BED OWNER‘S MANUAL //
DANGER
Do not open any electrical parts under any circumstances. This could lead to serious injury or death.
DANGER
Do not modify any components of the bed.
DANGER
Do not operate the bed in a potentially explosive atmosphere.
WARNING
To disconnect bring the bed into the flat position, then remove plug from outlet.
WARNING
Risk of injury: keep children away from the moving platforms.
WARNING
Risk of electric shock: connect the power plug to a properly grounded outlet only. See ground-
ing instructions.
SAVE THESE INSTRUCTIONS
ELECTRICAL GROUNDING
GROUNDING INSTRUCTIONS
This product is for use on a nominal 120-volt circuit and has a grounding plug that looks like the
plug illustrated in sketch A (see below). A temporary adapter that looks like the adapter illustrated
in sketches B and C can be used to connect this plug to a 2-pole receptacle as shown in sketch
B if a properly grounded outlet is not available. The temporary adapter should be used only un-
til a properly grounded outlet (sketch A) can be installed by a qualified electrician. The rigid ear,
lug, or the like extending from the adapter must be connected to a permanent ground such as
a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by
a metal screw.
FCC statement:
Radio Frequency is 2.4 GHz
FCC Compliance
This device complies with part 15 of the FCC rules. Operation is subject to the following two con-
ditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
To comply with the FCC RF exposure compliance requirements, no change to the antenna or the
device is permitted. Any change to the antenna or the device could result in the device exceed-
ing the RF exposure requirements and void user’s authority to operate the device.
12 // YAASA ADJUSTABLE BED OWNER‘S MANUAL 13YAASA ADJUSTABLE BED OWNER‘S MANUAL //
PREFACE
Dear Customer,
Thank you for choosing a product from Yaasa.
With the Yaasa Adjustable bed you have a product that meets all safety requirements.
Wrong or unintended installation or use of the system might lead to several dangers. In chapter
1 “SAFETY” and by safety notes in the entire manual we point out various dangers which might
appear.
This manual shall enable persons to assemble and operate the system safely.
Following the notes and warnings in this document helps avoid dangers and damage of the sys-
tem. All persons working at and with the system must have the manual available when perform-
ing tasks at and with the system. Furthermore, they must follow the relevant data and notes. The
manual must always be complete and legible.
Yaasa Studios Inc. assumes no liability either for technical or printing errors nor for deficiencies
in this documentation, furthermore there is no liability for damages caused directly or indirectly
by the delivery, performance or usage of this documentation.
MANUFACTURER / SUPPORT
Yaasa Studios
511 Olive Street
Santa Barbara, CA 93101
USA
help.yaasa.com
NOTICE
In case of technical problems contact our support:
Phone Number: 855-622-3711
email: info@yaasastudios.com
Always mention product name and revision status when requesting support (see type plate).
02
LIABILITY
The descriptions of product characteristics in this operating manual do not constitute a gua-
rantee of the presence of these characteristics.
No liability shall be assumed for defects or damage caused by any of the following reasons:
▪ Unintended use of the system.
▪ Disregard of this manual.
▪ Unauthorized modifications of the system.
▪ Improper work on and with the system.
▪ Operating the system when it is damaged.
▪ Improperly executed repairs.
▪ Unauthorized modification of operating parameters.
▪ Catastrophes, external influences or force majeure.
Introduction
14 // YAASA ADJUSTABLE BED OWNER‘S MANUAL 15YAASA ADJUSTABLE BED OWNER‘S MANUAL //
The Yaasa Adjustable Bed is delivered in two boxes with all functional components and tools
to fully assemble and operate the system. Upon opening the packaging make sure all listed
parts are included and in perfect condition. In an unlikely case of parts being damaged or
missing please contact Yaasa (chapter 2 INTRODUCTION). Make sure the boxes are stored
horizontally in a dry place at room temperature.
03
ASIDE RAIL (LEFT)
BSIDE RAIL (RIGHT)
QUICK START GUIDE MANUAL
REMOTE CONTROL
ASSEMBLY SUPPORT
2x AAA BATTERIES
SIDE TO SIDE CABLE
2x CROSSBAR
C
PLATFORM ELEMENT (HEAD)
HEAD
K
PLATFORM ELEMENT (BASE)
BASE
L
PLATFORM ELEMENT (LEG)
LEG
M
PLATFORM ELEMENT (FOOT)
FOOT
N
14X MOUNTING SCREW
O4X MOUNTING SCREW
P
2x CORNER
CONNECTOR
COVER (TYPE A)
E2x CORNER
CONNECTOR
COVER (TYPE B)
F
POWER CONVERTER
G
POWER CABLE
H
I
2X USB MODULE
J
TOOL
4x LEG
D
Box Contents
The Yaasa
Adjustable Bed
Quick Start Guide
The Yaasa
Adjustable Bed
Owner‘s Manual
16 // YAASA ADJUSTABLE BED OWNER‘S MANUAL 17YAASA ADJUSTABLE BED OWNER‘S MANUAL //
B
C
C
A
NECESSARY TOOLS AND EQUIPMENT
The Yaasa Adjustable Bed is intended to be built by two adults. No additional tools or equipment
is necessary. All needed tools are included. Make sure enough space is available to manipulate
all parts during assembly. Slightly more space than the finished bed requires is recommended
for the assembly process.
All important steps, parts and movements are shown with grey indicators.
UNBOXING AND LAYING OUT THE MAIN PARTS
Lay both boxes flat on the ground with the graphic and logo facing up. Carefully open all boxes
and check its content as described in chapter 3 BOX CONTENTS.
NOTICE
Do not use a knife or sharp objects to open the boxes as it may lead to damage of the product.
NOTICE
Before starting the assembly make sure all parts have reached room temperature. Too cold or
warm parts may lead to problems during the assembly.
CAUTION
Sharp edges. Be careful when handling any mechanical parts. Do not touch any sharp edges.
CAUTION
Do not lift the side rails by moving parts. Always lift them by the rigid frame.
04 Take out all internal boxes. Open the pack-
aging of the side rails (A, B) and crossbars
(C) and lay them out as seen on the picture.
Use the stickers on the parts to find the right
position and orientation.
CONNECTING THE BARS
1
2
3
4
A
B
C
C
Follow order as shown (1-4).
Slide the side rails (A, B) into
the crossbars (C) until you reach
the first stop. Shown in detailed
views on page 18.
NOTICE
Use the packaging material to prevent damage of parts and the floor when laying them down.
WARNING
SMALL CHILDREN AND PETS WARNING
After your Yaasa Adjustable Bed has been unboxed, immediately dispose of packaging as it can
smother small children and pets. To avoid injury, children and pets should not be allowed to play
on or under the bed.
Children should not operate this product without adult supervision. Close supervision is neces-
sary when this furnishing is used by, or near children, invalids, or disabled persons.
DO NOT REMOVE RIBBONS
LOOK AT LABELS ON FRAME ELEMENTS
Assembly
18 // YAASA ADJUSTABLE BED OWNER‘S MANUAL 19YAASA ADJUSTABLE BED OWNER‘S MANUAL //
NOTICE
Do not lift one side of the bed higher than necessary to put the Crossbar on the Assembly support.
CAUTION
Lift the frame only by the center of the crossbar.
Slide the two parts together
by aligning the bracket on the
side rail (A, B) with the groove
on the crossbars (C).
CB
1
2
Press the two parts together (1)
and the crossbar down (2) until
the top of both parts are flush
and the crossbar (C) have proper
contact with the brackets of the
side rail (A, B).
connecting bars 2 – detail
INSTALLING LEGS
D
D
D
D
TURN TO LOCK
TOOL
Insert the supplied assembly tool (TOOL)
and turn the wheel clockwise. Tighten con-
nector wheel hand tight.
TURN TO LOCK
TOOL
Hint:
The arrow on the side rail indicates
the correct direction.
4x
2x
4x
2x
P
P
Remove the Assembly Support and repeat
the previous step on the head end of the
bed in order to assemble the remaining
legs. Then take out the Assembly Support.
Lift up the frame by the center of one cross-
bar, place the frame on the provided assem-
bly support (ASSEMBLY SUPPORT) and
tighten the two legs (D) with the screws (P).
Hint: Only one screw required per leg.
Repeat the following steps at all four corners:
20 // YAASA ADJUSTABLE BED OWNER‘S MANUAL 21YAASA ADJUSTABLE BED OWNER‘S MANUAL //
J
H
GI
J
F
F
E
E
ADDING CORNER COVERS CONNECTING CABLES
NOTICE
Stretch the side to side cable (I) to the appropriate length before connecting to avoid excessive
tension on the connectors.
2x
E
2x
F
J
12 pin 12 pin
2
pin
2
pin
10 pin
I I J
G
J J
Create a loose loop with the
USB-cable (J) and run the cable
through the designated channel.
Place the 2 USB-modules
outside of the frame.
Connect the two side rails
with the side to side cable
(I) by plugging it into the
appropriate connector.
Connect one USB-mod-
ule (J) on each side. Use
the black two pin connec-
tor (see detail below).
Connect the power con-
verter (G) to appropriate
connector.
Place the corner covers (E, F) in their
position and click them in place.
22 // YAASA ADJUSTABLE BED OWNER‘S MANUAL 23YAASA ADJUSTABLE BED OWNER‘S MANUAL //
L
K
L
M
N
ADDING PLATFORM ELEMENTS
Lay out the platform ele-
ments (K, L, M, N) and align
them with the threaded holes
on the side rails (A, B).
Start with the large head el-
ement (K), followed by the
base (L), leg (M) and foot (N)
element.
NOTICE
While placing the platform elements (K, L, M, N) be careful not to trip over the side to side (I) or
the power cable (H).
Use the 14 mounting screws (O)
to fix all the platform elements by
hand. Screw them in hand tight.
ATTACHING THE USB-MODULES
CONNECTING THE POWER CABLE
Connect the power cable (H) to
the power converter (G) and run
the cable to the nearest power
outlet without tensioning the ca-
ble. Lay the cable behind the bed
and near walls to avoid tripping
over the power cable.
Refer to the grounding instruc-
tions for information about
proper grounding.
NOTICE
Do not put strain on any cables.
G
H
REMOVE ALL RIBBONS BEFORE
MOUNTING THE PLATFORMS !
Bring the two USB-modules (J)
into their final position by clicking
them onto the preinstalled mount-
ing plates under the base element.
2x J
FOOT
HEAD
24 // YAASA ADJUSTABLE BED OWNER‘S MANUAL 25YAASA ADJUSTABLE BED OWNER‘S MANUAL //
INSERTING BATTERIES
NOTICE
Do not use rechargeable batteries.
NOTICE
Replace the batteries of the remote control once a year.
NOTICE
Do not place the assembled bed flush against the wall to avoid damage to the bed and the wall.
Keep a small distance.
Insert the two provided 1,5V AAA batter-
ies and slide the cover in position.
BEFORE USING YOUR YAASA ADJUSTABLE BED FOR THE FIRST TIME
Your Yaasa Adjustable Bed is almost ready, pleasure follow these steps before using:
• Put a mattress on the Yaasa Adjustabled Bed
• Plug in your Yaasa Adjustable Bed
• Activate your bed with the remote control FOR ADDITIONAL ASSISTANCE
Please contact Yaasa Studios:
Phone: 855-622-3711
E-Mail: info@yaasastudios.com
Or visit help.yaasa.com
26 // YAASA ADJUSTABLE BED OWNER‘S MANUAL 27YAASA ADJUSTABLE BED OWNER‘S MANUAL //
DISASSEMBLY
To disassemble Yaasa Adjustable Bed follow the actions of the assembly instructions in reverse
order.
NOTICE
After the side to side cable gets unplugged and reconnected a drive reset must be performed.
Perform a drive reset by pressing the Flat Position button for at least 15 seconds. The remote
control displays “F” to confirm the input. Then the bed will move into the flat position and resets
the drive position.
05
To minimize the risk of pinch-
ing when transporting the side
rails, secure all moving parts
with packaging tape by wrap-
ping it all around the shown ar-
eas.
CAUTION
Do not grab the side rails by moving parts. Always grab them by the rigid frame.
TRANSPORTATION
The fully assembled bed may only be moved a moderate distance to adjust the position in a room.
To move the bed one person must lift the bed on each of the side rails.
CAUTION
Do not grab the side rails by moving parts. Always grab them by the rigid frame.
CAUTION
Do not tilt the assembled bed upright to move it.
NOTICE
Do not tilt the bed to move it. Do only move in horizontal position.
When moving to a different location, the bed must be disassembled.
Disassembly &
Transportation
28 // YAASA ADJUSTABLE BED OWNER‘S MANUAL 29YAASA ADJUSTABLE BED OWNER‘S MANUAL //
REMOTE CONTROL
The remote control allows you to move all parts of the bed from up to 23 feet (7m) away. There
can be up to two remote controls connected to one bed. The buttons on the remote control func-
tion as follows:
06
CAUTION
Activate Child Lock when children are present.
PRECONFIGURED MEMORY POSITIONS
The system comes preconfigured with two distinct positions. Each saved on one memory posi-
tion key:
RESET OF MEMORY POSITIONS
1 Anti-Snore position
Gently raises your head, opens
up nasal airway passages and
helps prevent snoring.
2 Zero Gravity position
Relieves pressure from your
back & spine, promotes bet-
ter blood flow and creates a
weightless sensation through-
out the body.
12
15 sec 1 x
1 2
LED array
The animated LED array changes according to the currently
used function.
1 2
Head Position Up and Down
Use the arrow keys to move the Head Position up and down. It
will move until you release the key or you reach the highest or
lowest position.
1 2
Flat Position
Press this button to automatically flatten the bed surface.
1 2
Foot Position Up and Down
Use the arrow keys to move the Foot Position up and down. It
will move until you release the key or you reach the highest or
lowest position.
Favorite Position 1
To recall the memory position, simply press the button (less than
3 seconds) and the bed moves automatically to the saved po-
sition. To store a favorite position, move the bed to the desired
position and press the button for at least 3 seconds. The default
setting for this button is Anti-Snore
Favorite position 2
To recall the memory position, simply press the button (less than
3 seconds) and the bed moves automatically to the saved po-
sition. To store a favorite position, move the bed to the desired
position and press the button for at least 3 seconds. The default
setting for this button is Zero-Gravity
1 2
Child Lock
Hold for three seconds to disable or enable the Child Lock. The
remote control displaying an L when pressing any button will in-
dicate that the child lock is activated.
To reset the Memory Position buttons to their precon-
figured positions you need to perform a default reset.
(1) Press the Head Position down and Foot Position
down simultaneously for at least 15 seconds.
(2) Now press any key (except Child Lock) until the
bed moves into the flat position. The reset was
successful once you reach the lowest position.
Operation
30 // YAASA ADJUSTABLE BED OWNER‘S MANUAL 31YAASA ADJUSTABLE BED OWNER‘S MANUAL //
CLEANING
WARNING
To reduce the risk of electric shock: Always unplug this bed from the electrical outlet before
cleaning.
To clean any parts of Yaasa Adjustable Bed only use a dry or damp lint free cloth. Do not get any
parts wet during cleaning.
NOTICE
Do not use any cleaning agent to clean Yaasa Adjustable Bed as it may damage the surface fin-
ish. Non-alcohol based cleaners, sanitizers or others can destroy the anodized layer.
MAINTENANCE
The Yaasa Adjustable Bed is maintenance-free. In case of any damage or problem please con-
tact Yaasa:
07
Insert two 9V battery blocks into the power converter. Do not
use rechargeable batteries.
Make sure no heavy object or any person is on the bed or in the
range of moving parts.
Press the button on the power supply until the bed is in the flat
position.
08
BEHAVIOR
Remote does light up but
bed does not respond to
button presses.
Remote does not light up
during button presses and
bed does not respond.
Parts of the bed remain in
elevated position during
power failure.
POSSIBLE CAUSE / SOLUTION
1. Check power connection of the bed.
2.
Possible overheating after continuous use.
(The bed is not designed for continuous operation. Wait one
minute after each complete driving cycle.)
3. Unplug the power converter until the LED goes out and plug
it back in.
Replace the batteries of the remote control.
Unplug the power converter from the power connection.
Remove the cover of the power converter:
Phone: 855-622-3711
E-Mail: info@yaasastudios.com
Cleaning &
Maintenance
Unusual Behavior
& Solutions
32 // YAASA ADJUSTABLE BED OWNER‘S MANUAL 33YAASA ADJUSTABLE BED OWNER‘S MANUAL //
After this action, the batteries must be replaced.
If batteries are stored in the power supply as a backup they must
be replaced annually.
Press the button on the power supply until the bed is in the flat
position:
Remote control defective
or lost.
Parts of the bed do not
move evenly.
Make sure the bed is leveled evenly. Make sure no heavy ob-
jects or any person is on the bed or in the range of moving parts.
Perform a drive reset by pressing the Flat Position button for
at least 15 seconds. The remote control displays “F” to confirm
the input. Then the bed will move into the flat position and re-
sets the drive position.
Side to side cable gets
unplugged.
Side to side cable gets
unplugged during
movement.
Plug in the side to side cable. Perform a drive reset by press-
ing the Flat Position button for at least 15 seconds. The re-
mote control displays “F” to confirm the input. Then the bed
will move into the flat position and resets the drive position.
Unplug the power converter until the LED goes out and plug it
back in.
Plug in the side to side cable. Perform a drive reset by pressing
the Flat Position button for at least 15 seconds. The remote
control displays “F” to confirm the input. Then the bed will move
into the flat position and resets the drive position.
WARNING
Using the button on the power converter to lower the bed will override the Child Lock feature.
Make sure no children or pets are near moving parts when performing this action.
WARNING
By inserting batteries into the power supply the bed can be moved even if not connected to the
mains and when the Child Lock function is activated.
34 // YAASA ADJUSTABLE BED OWNER‘S MANUAL 35YAASA ADJUSTABLE BED OWNER‘S MANUAL //
09
PROPERTY
Input Voltage
Rated Input current
Suitable mattress
dimensions
Ambient conditions
Maximum load
SPECIFICATION
100-240 V
1.8 A
King
76 in × 80 in
Queen
60 in × 80 in
TwinXL
39 in × 80 in
Indoor use only
700 lbs evenly distributed
10
NOTICE
Dispose parts of this product during the final shutdown environmentally friendly and mono
fractional.
PRINCIPLE
Be aware of the raw materials which form the basis of the bed. This product does not belong in
the municipal trash. Most components of this product are recyclable. Please protect our environ-
ment for future generations and dispose responsibility. Consult local authorities regarding local
laws, regulations and resources for responsible and proper disposal of this product.
Technical Data
Final Disposal
Page Intentionally Left Blank
36
// YAASA ADJUSTABLE BED OWNER‘S MANUAL
FOR ADDITIONAL ASSISTANCE
Please contact Yaasa Studios:
Phone: 855-622-3711
E-Mail: inf[email protected]
Or visit help.yaasa.com
/
