Proteco PTP45 User manual

Proteco
Brand
Proteco
Model
PTP45
Category
Gate Opener
Type
User manual

Proteco PTP45 is a tubular motor designed for automating blinds and awnings. It features:

  • Adjustable limit switches for setting the opening and closing positions
  • Easy installation with the included wall fixing support
  • Manual override with the provided release key (PTP45 M model only)
  • Suitable for a wide range of materials, including PVC, aluminum, wood, and steel
  • Can be used for awnings with up to 4 arms and 90 Kg of maximum lifting weight

With its powerful motor and robust construction, Proteco PTP45 provides reliable and convenient operation for your window coverings.

Proteco PTP45 is a tubular motor designed for automating blinds and awnings. It features:

  • Adjustable limit switches for setting the opening and closing positions
  • Easy installation with the included wall fixing support
  • Manual override with the provided release key (PTP45 M model only)
  • Suitable for a wide range of materials, including PVC, aluminum, wood, and steel
  • Can be used for awnings with up to 4 arms and 90 Kg of maximum lifting weight

With its powerful motor and robust construction, Proteco PTP45 provides reliable and convenient operation for your window coverings.

PTP45
PTP45 50M
PTP45 20 - PTP45 30 - PTP45 50
Instructions
Automation for blinds and awnings
01
01
02
03
..........................................................................................................................................
................................................................................................................................ 04
05
06
...................................................................................................... 06
03
04
......................................................................................................................................... pag
................................................................................................................... pag
................................................................................
................................................................................................................... pag
.......................................................................................................... pag
pag
pag
pag
pag
pag
.............................................................................................................................................. pag
07
........................................................................................................................................
pag
02 ................................................................................... pag
06
............................................................................................................................. pag
.................................................................................................................................................. 08
pag
................................................................................................................................................ 08
pag
................................................................................................................................................. 08
pag
....................................................................................................................
02.......................................................................................................... pag
......................................................................................................
07pag
2.1
.
3.4.1
3.4.2
1.
Index
SAFETY INSTRUCTIONS
2. DESCRIPTION AND INTENDED USE
Technical data
2.3 Kit content
3. INSTALLATION
3.1 Preliminary checks
3.2 Motor/Tubular assembly
3.3 Wiring
Limit switch in closing
Limit switch in opening
2.4 Dimensions
3.5 Awnings
COMPLIANCE DECLARATION
3.4 Limit switch setting
4. WARRANTY
5. MAINTENANCE
6. DISPOSAL
2.2 Selection guide
WARNING
Important safety instructions for people, READ CAREFULLY when you see this symbol:
Always cut off the power supply before performing any type of intervention.
Always make sure the gearmotor is properly connected to the earth



Do not allow children to play with the fixed command devices, or in the gate’s area of operation.


1
1. SAFETY INSTRUCTIONS



Keep any remote control devices (i.e. transmitters) away from children, to prevent the gearmotor from being
accidentally activated
CE COMPLIANCE DECLARATION
Manufacturer: PROTECO S.r.l.
Address: Via Neive, 77 – 12050 Castagnito (CN) – ITALIA
declares that
The product type: PTP45 tubular motor for rolling shutters and awnings
Modelli: PTP45 20, PTP45 30, PTP45 50, PTP45 50M
It complies with the essential requirements of EEC Directives:
2006/95/EC Low Voltage Directive
2004/108/EC Electromagnetic Compatibility Directive
The product also complies, with the constraints of the applicable parts, with the following standards:
EN 55014-1
EN 55014-2
EN 60335-1: 2002+A1+A11+A12+A2+A13
EN 60335-2-97:2006+A11
EN 61000-3-2
EN 61000-3-3
The manufacturer declares that the start-up of the machinery is not permitted unless the machine has been
identified and declared as conformed to 2006/42/EC Machinery Directive.
Castagnito, October 1st 2015
Marco Gallo
Amministratore Delegato
PTP45 30 30
PTP45 50
50
PTP45 20 20 32 Kg
52 Kg
90 Kg
PTP45 50M
2.5 3.5 4 5.25 7 8 9.5 15
PTP45 30 PTP45 50 N.A.
6Kg/m²
9,5Kg/m²
PTP45 20 PTP45 30 PTP45 50
PTP 45 20
MAX m²
PTP45 30 PTP45 50 N.A.
12,5Kg/m² PTP45 20
50
13
244
1,06
3,30
620
50
13
244
1,06
2,40
480
30
17
226
0,95
2,35
480
20
17
155
0,68
2,30
440
The PTP45 range is designed to automate blinds and awnings.
2.1 TECHNICAL FEATURES
1 2
2. DESCRIPTION AND INTENDED USE
PTP4520
Nm
rpm
W
A
Kg
mm
Thrust
Motor Speed
Motor Power
Current
Weight
Length
PTP4530 PTP4550 PTP4550M
2.2 SELECTION GUIDE
Surface calculation:
height x width =
select the model according to
the table below
m2

V 

MATERIAL
del N
Ø70 mm tubolar motors
Intersect the value of the extension
with the number of arms of the awning
EXTENSION OF ARMS
N° ARMS
PTP45 20 – PTP45 30 – PTP45 50
PTP45 50M
1
2
3
4
1
2
3
4
5
2.4 DIMENSIONS
3
2.3 KIT CONTENT
PTP 45 (without emergency release)
1
2
3
4
5
6
7
PTP 45 M (with emergency release)
01
02
03
04
n°1
n°1
n°1
n°1
Tubular motor
Limit switch adjuster wrench
Split pin
Wall fixing support
01
02
03
04
05
n°1
n°1
n°1
n°1
n°1
Tubular motor
Limit switch adjuster wrench
Wall fixing support
Split pin
Release key




3.1 PRELIMINARY CHECKS

1- Low down the roller blind and disconnect it from the tubular
2- Remove the axis
RECOMMENDED TOOLS:
3 4
3. INSTALLATION
.
3.2 MOTOR/TUBULAR ASSEMBLY
Measure the distance between the two supports.

covering the locking ring of the limit switch.
.


the wall as shown in the picture.





Complete the assembling locking the system with the
provided split pin.
5
Wall xing support
CLOSE


.
3.3WIRING .
Wire the system according to the below diagram:

minimum distance of 3 mm between the contacts. Every motor has to have its own device.
WIRES KEY:
1
2BROWN
3B)
4



the black and the brown wires.
3.4LIMIT SWITCH SETTING
3.4.1 LIMIT SWITCH IN CLOSING


5 6
Wiring diagram for motor installed at your left
OPEN/CLOSE
OPEN
3.4.2 LIMIT SWITCH IN OPENING







3.5 AWNINGS
Ø 70 adapters are available for awnings. Item code MTPR01.











PROTECO Srl Via Neive 77, 12050 Castagnito (CN) Italia
The warranty doesn’t respond when:
7
4. WARRANTY







5. MAINTENANCE


6. DISPOSAL
DO NOT DISPOSE OF IN NATURE!



7 8
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Proteco PTP45 User manual

Proteco
Brand
Proteco
Model
PTP45
Category
Gate Opener
Type
User manual

Proteco PTP45 is a tubular motor designed for automating blinds and awnings. It features:

  • Adjustable limit switches for setting the opening and closing positions
  • Easy installation with the included wall fixing support
  • Manual override with the provided release key (PTP45 M model only)
  • Suitable for a wide range of materials, including PVC, aluminum, wood, and steel
  • Can be used for awnings with up to 4 arms and 90 Kg of maximum lifting weight

With its powerful motor and robust construction, Proteco PTP45 provides reliable and convenient operation for your window coverings.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents