2. Spartan Equipment
  3. SE-BH06

Spartan Equipment SE-BH06 Operating instructions

  • Hello, I'm a chat assistant that has reviewed the provided document concerning the electrical wire harness pin assembly instructions. This document contains tables for various machine models, specifying how to correctly pin 14 pin and 8 pin connectors, especially relating to the 5-wire Articulating Brush Cutter, hydraulic angle broom, 6-way dozer blade, and hydraulic rotating tree shear attachments. I am ready to answer your questions about the document.
  • What is the purpose of this document?
    Which attachments are covered by this pin assembly table?
    What is the color of the ground wire?
    What does the red wire on the connector assembly indicate?
    Which pin should never be pinned?
Electrical Wire Harness Pin Assembly Table Instructions
For help on placing pins not listed, call: Shane Freeze 336-569-8422
Takeuchi 14 Pin Kubota 14 Pin
B=Black = Ground B=Ground
E=Yellow C=Hot
F=Orange D=Hot
C=Red Only have two functioning unless you
D=Blue have added more from Kubota
Bobcat S Models 14 Pin Only Case 14 Pin
B=Black = Ground B=Black = Ground
E=Orange C=Orange
F=Yellow D=Yellow
G=Blue E=Blue
H=Red F=Red
Cat D Models 14 Pin John Deere G or D Models 14 Pin
B=Black = Ground A=Black= Ground
F=Blue C=Red
E=Red D=Blue
C=Yellow E=Yellow
D=Orange G=Orange
Cat D Models 8 Pin
A=Black = Ground
B=Red
C=Blue
D=yellow
H=Orange
ASV 8 Pin Gehl 14 Pin
A=Black = Ground B=Black = Ground
E=Orange C=Orange
F=Yellow D=Yellow
C=Blue E=Red
D=Red F=Blue
The pin table covers the 5-wire Articulating Brush Cutter assembly and the Following: Hyd. Angle Broom/6-way
Dozer Blade/ Hydraulic Rotating Tree Shear or any other 2 function attachments you may have. You will need to
place pinned wires in the correct letter that corresponds with your model which is listed above. The Black wire on
the connector assembly is your ground, the Red wire on your connector assembly is any other pin listed above.
Never pin K which is constant hot.
/