The Volture is a power utility pedal that allows you to adjust the voltage to emulate the tonal effects of a partially drained

9V battery when placed between the power supply and an analog effect pedal. Turning on the footswitch activates the

Volture voltage drop. When bypassed your pedal receives full voltage. The knob adjusts the voltage level. Clockwise is more,

counterclockwise is less. NOTE: As you turn the voltage down, the LED will dim.

VOLTURE

**WARNING**

The Volture should not be paired with any digital/logic circuitry-based pedal, otherwise the user risks potential damage to the pedal

being powered due to inadequate voltage. As long as your pedal is all analog, you’ll be ne. A dying battery never hurt an analog

circuit. In fact, you may be surprised by the trippy sounds you nd lurking in your favorite overdrive or distortion!