Home Accents Holiday 22SV22944 Operating instructions

Brand: Home Accents Holiday

Model: 22SV22944

Type: Operating instructions

Home Accents Holiday 22SV22944 is a colossal spider decoration that can be powered by an adapter or batteries. It features lights, sound, and a motion sensor that activates when movement is detected up to 11.5 feet away. The volume is adjustable, and there are three modes: ON, TIMER, and SENSOR. In TIMER mode, the spider operates for 6 hours ON and 18 hours OFF. In SENSOR mode, it activates for one audio cycle with each motion detection. Assembly instructions and care tips are included.

PARTS LIST

A. Base x 1

B. Poles x 2

C. Support Pole x 1

D. Head x1

E. Upper Legs x 8

F. Middle Legs x 8

G. Large Fur Covers x 8

H. Fur Covers x 8

I. Lower Legs x 4

J. Lower Legs with

Stake Housings x 4

K. Feeder Legs x2

L. Upper Abdomen x1

M. Lower Abdomen x1

N. Short Poles x 3

O. Polybag with Small Parts

(Attached to the B. Poles )

P. Adapter * x 1

* Power Adapter Spec

Input: 120VAC 50/60Hz

Output: 5.9V 1.5A

NX 3

X 1

X 2

X 8

DX 1

X 8

X 4

X 8 X 8

X 4

X 2

LX 1

MX 1

X 30 Screws

Small Hex Key

Big Hex Key

x4 Lawn Stakes

NOTE: Do not overtighten the screws. Make sure the legs with (J) Lower Legs

with Stake Housings are in positions 2, 4, 5, and 7.

1/3

IMPORTANT TIPS:

• Ensure that the switch on the function control box is on the desired setting.

• Ensure that the floor or surface that the item sits on is flat and level.

• Be sure nothing is blocking the sensor.

• If the item still does not work, contact SVI Customer Service from 8:30 am to

5:30 pm PST at 1-855-428-3921, email customerservice@svius.com, or call

Home Accents Holiday Customer Service from Mon-Fri 8:00 am to 7:00 pm and

Sat 9:00 am To 6:00 pm EST at 1-855-HDHOLIDAY (1-855-434-6543).

NOTE: Left and right are relative to the

character.

NOTE: Install batteries into the battery box on the underside of the (D) Head and turn on

to ensure item functions before assembling it. The controls are switch operated, not

button operated. The switch can be toggled through the rubber covering.

1.1

3.3

3.1

3.2

EASY ASSEMBLY AND OPERATION INSTRUCTIONS

22SV22944 Colossal Spider

READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

IF ANY PART IS MISSING OR BROKEN, DO NOT ATTEMPT TO ASSEMBLE THE PRODUCT AND CONTACT SVI CUSTOMER SERVICE FROM 8:30 AM TO

5:30 PM PST AT 1-855-428-3921, EMAIL CUSTOMERSERVICE@SVIUS.COM, OR CALL HOME ACCENTS HOLIDAY CUSTOMER SERVICE FROM

MON-FRI 8:00 AM TO 7:00 PM AND SAT 9:00 AM TO 6:00 PM EST AT 1-855-HDHOLIDAY (1-855-434-6543).

USA/ États-Unis 1007261589

NOTE: The height of the spider can be

adjusted by replacing the (B, C) Poles with

the (N) Short Poles.

2 .1

Means It's

Locked

Click

Locking Pin

BACK

FRONT

RIGHT

LEFT

5.9 V

Note: The Colossal Spider can either be powered by an

adapter or with 4 C batteries.

When using the adapter while batteries are in the product,

the power will be sourced from the adapter only. However, it

is advised to remove the batteries from the product when

using the adapter.

WARNING: Do not press down on the rubber

covered switch. This is not a button. Pressing on

the switch may damage the item. Please note that

even though the rubber covering does not change

position, the switch beneath it can be toggled

through the rubber covering to any desired setting.

5.9 V

ADAPTER

5.9 V

NOTE: Do not overtighten the screws.

OPTIONAL: To adjust the tightness of the rotating

joint, use the Big Hex Key from the (O) Polybag with

Small Parts to adjust the nuts at the joints. A

clockwise motion will tighten the joint and a

counterclockwise motion will loosen the joint as

shown in Figure 7.1.

Motion Sensor

4.1 5.1

6.1

2/3

7.1

3/3

Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel cadmium) batteries. Do not mix old and new batteries. Rechargeable batteries to be removed from the product before being charged.

Only batteries of the same or equivalent type as recommended are to be used. Rechargeable batteries are only to be charged under adult supervision. Non-rechargeable batteries are not to be recharged.

Batteries are to be inserted with the correct polarity. Remove batteries if exhausted or if product is to be left unused for a long time. The supply terminals are not to be short-circuited. Dispose of batteries

safely. DO NOT DISPOSE OF BATTERIES IN FIRE, BATTERIES MAY EXPLODE OR LEAK

This mode will turn off lights and sound.

This mode will operate the same as ON mode within a 6HR On/18HR Off period.

This mode will activate lights and sound when the motion sensor is triggered and will

operate for 1 audio-cycle with each activation. The motion sensor will be triggered if

movement is detected up to 3.5m/11.5ft in front of the motion sensor.

This mode will continually operate the lights and sound of the item.

Raise or lower the volume using the volume control turn dial, turn all the way down to turn

the volume off.

BATTERY REPLACEMENT INSTRUCTIONS

Requires 4 x 1.5V C batteries (Not Included)

* You will need a small screwdriver (Not Included).

Locate the battery compartment on the product. Remove the battery compartment cover by using a small Phillips head screwdriver to unscrew the screw. After removing or installing the batteries, place

the battery compartment cover into position, and secure the battery cover. DO NOT overtighten screws.

FOR INDOOR/OUTDOOR USE

WARNING

This item is not a toy and should be used for decoration only. This item contains small parts that can be a choking

hazard. Keep all plastic and wire parts away from children.

1. Please assemble item according to instructions.

2. Children should be supervised by adults. Item should not be grabbed, as it becomes a tipping

hazard.

Please view all instructions carefully before assembling. Save this instruction sheet for future reference.

CARE AND STORAGE INSTRUCTIONS

When not in use, store this product in its original packing. Keep away from heat and moisture.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

CAUTION:

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate

the receiving antenna, Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the

dealer or experienced radio/TV technician for help.

CAN ICES-003(B)/NMB-003(B)

OFF

ARRÊT

TIMER

MINUTEUR

SENSOR

DÉTECTEUR

MARCHE

Berkeley, CA 94710

Tel: 1-855-428-3921

MADE IN CHINA