2. Ridetech
  3. 11004699

Ridetech 11004699 Installation guide

  • I've reviewed the provided instructions for the ridetech Universal 11004699 Crossmember. This document details the components, hardware, and air spring specifications included in the kit. I'm ready to answer your questions about the product and its installation.
  • What is the part number for this kit?
    What type of air springs are included?
    What is the minimum height of the air spring?
    What is the size of the included tubing?
350 S. St. Charles St. Jasper, In. 47546
Ph. 812.482.2932 Fax 812.634.6632
www.ridetech.com
Parts # 11004699
Universal Crossmember
Components:
2 90009000 9000 Air springs
2 90000001 Weld on lower mount
2 90000242 Weld on upper mount
2 90000380 Upper Shock Mount
2 90001617 Shock Studs
2 90001105 Crossmember Frame Plate
1 90001106 47” x 1 ½” O.D. x .188” wall tubing
Hardware:
6 99371001 3/8-16 x ¾” Bolts Air spring mounting bolts
6 99373003 3/8 SAE flat washer Air spring mounting bolts
6 99373005 3/8 split lock washer Air spring mounting bolts
2 99501010 ½” x 2 ¼” SAE GR 8 Bolts Upper shock mount
2 99502003 ½” SAE Nylock Jam Nuts Upper shock mount
IMPORTANT NOTE: MAKE SURE THE AIR SPRING MOUNTING HARDWARE DOES NOT
BOTTOM OUT IN THE AIR SPRING. IF THE HARDWARE IS TOO LONG, IT CAN DAMAGE THE
AIR SPRING.
Air Spring Dimensions
Minimum Height = 4 ½”
Ride Height = 9” – 9 ½”
Maximum Height = 12”
/