Cozzia CZ-710 Maintenance Service manual

Maintenance Service Manual

MODEL： CZ-710

By COZZIA Service Department

PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn

14. Disassembly of the footrest assembly.

A: Locate the zipper which join seat pad and footrest cover. Unzip the zipper to then end.

B: Locate the two bolts that fix the footrest assembly to the chair. Remove the cotter pin first then take off the bolts.

C: Pull the footrest out a little bit. Disconnect the two wire connectors and one air hose connector.

D: Locate the one bolt that fix the link rod to footrest assembly. Remove the cotter pin first then take off the bolt.

Then footrest assembly can be taken away.

Locate the two bolts and cotter pins. The bolts and cotter pin have been taken away.

Locate all connectors at here. All connectors have been disconnected.

Cotter pin has been removed. Locate the bolt and cotter pin.

PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn