DESIGNER HOOD CK-LUME
THE BEAUTY OF SIMPLICITY
USER MANUAL
User Instruction
Note: Please read the instructions before installation.
Your cooker hood is for domestic use only, not suitable for barbecue and other
commercial use.
Any installation work must be carried out by a qualified electrician or qualified
installer.
The cooker hood and the aluminium filters should be cleaned regularly to maintain in
good working condition.
Before cleaning, always ensure that you have switched off your cooker hood.
Clean the cooker hood as shown in the instruction manual.
Do not dry your cooker hood over fire.
If there is any fault with your cooker hood, please call the service department
appointed by agent for servicing.
If there is any fault with your cooker hood, please call the service centre at:
Casa (S) Pte Ltd
15 Kian Teck Crescent Singapore 628884
Service Hotline: 6268 0077
Service Fax: 6898 0510
Email: service@casa.com.sg
Installation (wall mount)
Wall-mounted:
1.The cooker hood should be placed at a distance of
60-70cm from the electric hob and 65-70cm for gas hob
for the best effect. See Pic 1.
2.The cooker hood has two options of the air outlet.One
is for the top way,one is back way.The cover panel could
be shift when you choose one outlet.See Pic 2.
2. Drilling two holes with 8mm diameter once the
installation height is determined. See Pic 3. Pic 1
3.Assemble the outlet on the cooker hood with the screw,and fix the extension pipe into
the outlet.
4. Tighten the screws into the tube.
5.Hook the cooker hood onto the screws. See Pic 5.
Pic 2
Pic 3
Pic 4 Pic 5
Operation:
The switch is operated as below ( see Pic. 6):
1. There are 4 button on the cooker hood control panel.Tehy are.speed down,speed
up,decorate light and light.
2. After connect to the power line,the cooker hood will sound one time.And it will change
to the biding situation. Press the button one time,the cooker hood will sun with
the lowest speed.Press one more time,the speed will to change to mid and high
speed.There are three speed for the hood..
3. When press the button ,the speed will be descent.When the it is on the low
speed,press the button one more time,the cooker hood will stop running.
4. Press the button ,the light will be on and off.
5. Press the button one time,the decorate light will be work and the color will be
blue.Press one more time,the color will change to red,green and white by circulate.
6. Perss the button with 2 seconds.The decorate light will work into the automatic
color changing mode. Sequence of the color will be blue-red-green-white by
gradually.Press the button with 2seconds more,the decorate light will be turn off.
7. When the decorate light working in the automatic color changing mode.Press the
one time,the color will stop changing and keep its color when press the
button.Press again,the color go on changing.
Pic 6
Maintenance
Changing and cleaning the filter.
(See Pic 7)
1. Remove the aluminum filters and dip them into hot water,
pour some dish washing detergent in it and leave it for 5-10
minutes. Use a sponge to remove stain from the surface. Do
not scrub with force to prevent damage to the filters.
2. The aluminum filters can be washed in a dishwasher.
3. For effective cleansing of recycled air, the charcoal filters
should be replaced every six months of regular cooking. (Life
span of charcoal filter depend on intensity of cooking)
Pic 7
Note: All the filters are made of metal. Please do not use any corrosive detergent when
cleaning. Please unplug before cleaning.
Changing the light bulbs
1. Before changing the lights, make sure that the cooker hood is plugged off.
2. Remove the screw on the round glass,take off the glass. See Pic 8
3. Push down the light.See Pic 9.
4. Push off the connection of the light.See Pic 10.
5. Assemble the light and connect the line.See Pic 11
Pic 8 Pic 9
Pic10 Pic 11
-
1
-
2
-
3
-
4
-
5
