AEG LAM6000 Owner's manual

AEG
Brand
AEG
Model
LAM6000
Type
Owner's manual

This manual is also suitable for

www.howdens.com/appliances-registration
Built-Under Larder Fridge LAM6000
Instructions and Installation
3
Instructions and Installation
Free 3 year
guarantee
Call now1
0333 010 0009
Alternatively, visit www.howdens.com/appliance-registration
3 year guarantee available.
Register your appliance within 90 days2
By registering your appliance and creating an account,
we will keep you up to date with the latest product information
and notify you immediately of any important product updates
1 Lines are open Monday to Friday 9am to 5pm. Calls will be charged at your local rate
and may be recorded and monitored for training and quality purposes.
2 So that in the event of an important product update, or recall, we can contact you.
Welcome
Dear Customer
Congratulations on your choice of energy ecient
Built-Under Larder Fridge.
• Please read these instructions before use to ensure safe and
economical operation of the Built-Under Larder Fridge.
• Please keep these instructions in a safe place for your future
reference.
•If you have any questions, or if you are not sure about any
information contained in this booklet please contact us - details
at the end of the User Instructions.
This appliance is intended to be used in household and similar
domestic applications, see guarantee page for definition of
domestic use*.
Throughout this manual the
following symbols are used.
3
Exclusive to Howdens
Dear Customer
Congratulations on your choice of energy efficient larder fridge.
•Please read these instructions before use to ensure safe and economical
operation of the larder fridge.
•Please keep these instructions in a safe place for your future reference.
•If you have any questions, or if you are not sure about any information
contained in this booklet please contact us - details at the end of the User
Instructions.
This appliance is intended to be used in household and similar domestic
applications, see guarantee page for definition of domestic use*.
Welcome
Warning for hazardous
situations with regard to
life and property.
Warning for
electric shock.
Warning for
risk of fire.
Throughout this manual the
following symbols are used.
Warning for hazardous
situations with regard to
life and property.
3
Exclusive to Howdens
Dear Customer
Congratulations on your choice of energy efficient larder fridge.
•Please read these instructions before use to ensure safe and economical
operation of the larder fridge.
•Please keep these instructions in a safe place for your future reference.
•If you have any questions, or if you are not sure about any information
contained in this booklet please contact us - details at the end of the User
Instructions.
This appliance is intended to be used in household and similar domestic
applications, see guarantee page for definition of domestic use*.
Welcome
Warning for hazardous
situations with regard to
life and property.
Warning for
electric shock.
Warning for
risk of fire.
Throughout this manual the
following symbols are used.
Warning for
electric shock.
3
Exclusive to Howdens
Dear Customer
Congratulations on your choice of energy efficient larder fridge.
•Please read these instructions before use to ensure safe and economical
operation of the larder fridge.
•Please keep these instructions in a safe place for your future reference.
•If you have any questions, or if you are not sure about any information
contained in this booklet please contact us - details at the end of the User
Instructions.
This appliance is intended to be used in household and similar domestic
applications, see guarantee page for definition of domestic use*.
Welcome
Warning for hazardous
situations with regard to
life and property.
Warning for
electric shock.
Warning for
risk of fire.
Throughout this manual the
following symbols are used.
Warning for
risk of fire.
To be updated
4 5www.howdens.com
Built-Under Larder Fridge LAM6000 Instructions and Installation
Congratulations on your choice of Lamona appliance.
Warning and Safety information
3
Exclusive to Howdens
Dear Customer
Congratulations on your choice of energy efficient larder fridge.
•Please read these instructions before use to ensure safe and economical
operation of the larder fridge.
•Please keep these instructions in a safe place for your future reference.
•If you have any questions, or if you are not sure about any information
contained in this booklet please contact us - details at the end of the User
Instructions.
This appliance is intended to be used in household and similar domestic
applications, see guarantee page for definition of domestic use*.
Welcome
Warning for hazardous
situations with regard to
life and property.
Warning for
electric shock.
Warning for
risk of fire.
Throughout this manual the
following symbols are used.
3
Exclusive to Howdens
Dear Customer
Congratulations on your choice of energy efficient larder fridge.
•Please read these instructions before use to ensure safe and economical
operation of the larder fridge.
•Please keep these instructions in a safe place for your future reference.
•If you have any questions, or if you are not sure about any information
contained in this booklet please contact us - details at the end of the User
Instructions.
This appliance is intended to be used in household and similar domestic
applications, see guarantee page for definition of domestic use*.
Welcome
Warning for hazardous
situations with regard to
life and property.
Warning for
electric shock.
Warning for
risk of fire.
Throughout this manual the
following symbols are used.
3
Exclusive to Howdens
Dear Customer
Congratulations on your choice of energy efficient larder fridge.
•Please read these instructions before use to ensure safe and economical
operation of the larder fridge.
•Please keep these instructions in a safe place for your future reference.
•If you have any questions, or if you are not sure about any information
contained in this booklet please contact us - details at the end of the User
Instructions.
This appliance is intended to be used in household and similar domestic
applications, see guarantee page for definition of domestic use*.
Welcome
Warning for hazardous
situations with regard to
life and property.
Warning for
electric shock.
Warning for
risk of fire.
Throughout this manual the
following symbols are used.
Contents
Warning and Safety information 05
Children & General Safety 06
Food Safety 06
Energy Eciency 07
Warning (general) 07
Waste Electrical and Electronic Equipment (WEEE) 08
Information 08
Electrical Requirements 09
WARNING! This appliance must be earthed 09
IMPORTANT! Fitting a dierent plug 09
Transport Instructions 10
WARNING! 10
1. Using the Appliance 11
Temperature control and adjustment 11
Defrosting 12
Food Storage Examples 13
Food Storage advice and recommendations 14
Do’s and Don’ts 15
Removal of door trays 16
Cleaning of air vent grilles 16
2. Cleaning and Care 17
Replacing the interior light bulb 18
3. Installation 19
Reversing the door opening 20
Step-by-step Installation instructions 22
4. Problem Solving 29
5. Guarantee 30
3
Exclusive to Howdens
Dear Customer
Congratulations on your choice of energy efficient larder fridge.
•Please read these instructions before use to ensure safe and economical
operation of the larder fridge.
•Please keep these instructions in a safe place for your future reference.
•If you have any questions, or if you are not sure about any information
contained in this booklet please contact us - details at the end of the User
Instructions.
This appliance is intended to be used in household and similar domestic
applications, see guarantee page for definition of domestic use*.
Welcome
Warning for hazardous
situations with regard to
life and property.
Warning for
electric shock.
Warning for
risk of fire.
Throughout this manual the
following symbols are used.
IMPORTANT!
DO NOT connect the appliance
to the electricity supply until all
packing and transit protectors
have been removed.
Please read these instructions
carefully to ensure safe and
trouble-free operation.
Check that the appliance is
undamaged upon receipt.
NEVER install a damaged
appliance.
3
Exclusive to Howdens
Dear Customer
Congratulations on your choice of energy efficient larder fridge.
•Please read these instructions before use to ensure safe and economical
operation of the larder fridge.
•Please keep these instructions in a safe place for your future reference.
•If you have any questions, or if you are not sure about any information
contained in this booklet please contact us - details at the end of the User
Instructions.
This appliance is intended to be used in household and similar domestic
applications, see guarantee page for definition of domestic use*.
Welcome
Warning for hazardous
situations with regard to
life and property.
Warning for
electric shock.
Warning for
risk of fire.
Throughout this manual the
following symbols are used.
WARNING!
• Leave to stand for at least
4 hours before switching on
to allow compressor oil to
settle, especially if transported
horizontally.
•If you are discarding an old
refrigerator please ensure any
door lock or latch is disabled so
as to not trap children
•Do not dispose of the appliance
on a fire. The appliance
contains substances in the
insulation (Cyclopentane)
and in the cooling system
(R600a gas) which are highly
flammable. Therefore be careful
not to damage the appliance
or cooling system. If damaged
avoid sources of ignition and
ventilate the room immediately.
• Contact your Local Council for
disposal of an old appliance.
• We do not recommend the use
of this appliance in unheated
rooms or outbuildings.
• This refrigerator must only be
used for it’s intended purpose of
storing edible foodstus.
• This appliance is not suitable for
freezing foodstus.
• Ensure that the plug remains
accessible after installation.
DO NOT USE multi-socket
adapters and leads.
• Failure to observe the installation
and safety instructions may
invalidate your Guarantee and
cause harm to the person or
property.
6 7www.howdens.com
Built-Under Larder Fridge LAM6000 Instructions and Installation
WARNING! - Keep ventilation openings, in the appliance
enclosure or in the built-in structure, clear of
obstruction.
WARNING! - Do not use mechanical devices or other means
to accelerate the defrosting process, other than
those recommended by the manufacturer.
WARNING! - Do not damage the refrigerant circuit.
WARNING! - Do not use electrical appliances inside the food
storage compartments of the appliance.
3
Exclusive to Howdens
Dear Customer
Congratulations on your choice of energy efficient larder fridge.
• Please read these instructions before use to ensure safe and economical
operation of the larder fridge.
• Please keep these instructions in a safe place for your future reference.
• If you have any questions, or if you are not sure about any information
contained in this booklet please contact us - details at the end of the User
Instructions.
This appliance is intended to be used in household and similar domestic
applications, see guarantee page for definition of domestic use*.
Welcome
Warning for hazardous
situations with regard to
life and property.
Warning for
electric shock.
Warning for
risk of fire.
Throughout this manual the
following symbols are used.
Children &
General Safety
• This appliance can be used
by children aged from 8 years
and above and persons with
reduced physical, sensory or
mental capabilities or lack of
experience and knowledge
if they have been given
supervision or instruction
concerning the use of the
appliance in a safe way
and understand the hazards
involved.
• Children aged from 3 to 8
years are allowed to load and
unload the appliance provided
that they have been properly
instructed.
• This appliance may be used by
persons with very extensive and
complex disabilities provided
that they have been properly
instructed.
• Children of less than 3 years
of age should be kept away
from the appliance unless
continuously supervised.
• Do not let children play with the
appliance.
• Children shall not carry out
cleaning and user maintenance
of the appliance without
supervision.
• Keep all packaging away
from children and dispose of it
appropriately.
• This appliance is intended to be
used in household and similar
applications such as:
– Farm houses; sta kitchen
areas in shops, oces and
other working environments;
– By clients in hotels, motels,
bed and breakfast and other
residential type environments.
3
Exclusive to Howdens
Dear Customer
Congratulations on your choice of energy efficient larder fridge.
• Please read these instructions before use to ensure safe and economical
operation of the larder fridge.
• Please keep these instructions in a safe place for your future reference.
• If you have any questions, or if you are not sure about any information
contained in this booklet please contact us - details at the end of the User
Instructions.
This appliance is intended to be used in household and similar domestic
applications, see guarantee page for definition of domestic use*.
Welcome
Warning for hazardous
situations with regard to
life and property.
Warning for
electric shock.
Warning for
risk of fire.
Throughout this manual the
following symbols are used.
Food Safety
• To avoid contamination of
food respect the following
instructions:
– Do not open the door for long
periods of time.
– regularly clean all surfaces
that come into contact
with food and the easily
accessible drainage
channels.
– keep raw and cooked food
well apart and do not let raw
foods drip onto cooked and
other foodstus.
– Never place hot food into the
refrigerator. Allow to cool to
room temperature first.
– Allow frozen food to defrost
inside the refrigerator.
– Good food stock rotation
reduces waste. Place new
products behind older
versions.
• The medium temperature
setting ensures good
preservation of fresh food.
Higher temperature inside
the appliance may lead to
shorter shelf life of food and
wastage.
• Cover the food with
packaging to preserve its
freshness and aroma.
• Always use closed containers
for liquids and food to avoid
odours filling in the whole
compartment.
• To avoid cross-contamination
between cooked and raw
foods, always wrap or cover
items.
• A higher temperature setting
may lead to shorter storage
life of foodstus and possible
increase in harmful bacteria.
• Store foodstus in the
appropriate parts of the
refrigerator to maximise
freshness and longevity of
food.
Energy Eciency
• Most ecient use of energy
is ensured in the default
configuration with the shelves
evenly distributed. Position of
the door racks does not aect
energy consumption.
• Do not open the door too
frequently or leave open longer
than necessary.
• If the ambient temperature
is high and the temperature
control is set to too low with
the refrigerator fully loaded,
the compressor may run
continuously, causing extra ice
formation on the evaporator.
Set the temperature control
slightly warmer to allow
automatic defrosting and to
save energy.
8 9www.howdens.com
Built-Under Larder Fridge LAM6000 Instructions and Installation
Waste Electrical and Electronic Equipment (WEEE)
The waste electrical symbol on this product indicates that this product
may not be treated as household waste. Instead it should be handed
over to the applicable collection point for recycling of electrical and
electronic equipment. Disposal must be carried out in accordance with
local environmental regulations for waste disposal. For more detailed
information please contact your local council household waste site.
This appliance meets all relevant safety standards.
3
Exclusive to Howdens
Dear Customer
Congratulations on your choice of energy efficient larder fridge.
• Please read these instructions before use to ensure safe and economical
operation of the larder fridge.
• Please keep these instructions in a safe place for your future reference.
• If you have any questions, or if you are not sure about any information
contained in this booklet please contact us - details at the end of the User
Instructions.
This appliance is intended to be used in household and similar domestic
applications, see guarantee page for definition of domestic use*.
Welcome
Warning for hazardous
situations with regard to
life and property.
Warning for
electric shock.
Warning for
risk of fire.
Throughout this manual the
following symbols are used.
Electrical Requirements
Before you insert the plug into
the wall socket make sure the
voltage and frequency shown
in the rating plate inside the
appliance corresponds to your
electricity supply. We recommend
that this appliance is connected
to the mains supply via a suitable
switched and fused socket in a
readily accessible position. Should
the mains lead of the appliance
become damaged or should it
need replacing at any time, it
must be replaced by a suitably
competent person.
3
Exclusive to Howdens
Dear Customer
Congratulations on your choice of energy efficient larder fridge.
• Please read these instructions before use to ensure safe and economical
operation of the larder fridge.
• Please keep these instructions in a safe place for your future reference.
• If you have any questions, or if you are not sure about any information
contained in this booklet please contact us - details at the end of the User
Instructions.
This appliance is intended to be used in household and similar domestic
applications, see guarantee page for definition of domestic use*.
Welcome
Warning for hazardous
situations with regard to
life and property.
Warning for
electric shock.
Warning for
risk of fire.
Throughout this manual the
following symbols are used.
WARNING! This
appliance must be earthed
If the fitted moulded plug is not
suitable , then the plug should
be cut o. Destroy the old plug
which is cut o as a plug with
bared cables could present a
shock hazard if inserted into a
socket. The moulded plug on this
appliance incorporates a 13A
fuse. Should the fuse need to be
replaced an ASTA BEAB approved
BS 1362 fuse of the same rating
must be used. Do not forget to
refit the fuse cover. In the event of
losing the fuse cover the plug must
not be used until a replacement
fuse cover has been fitted.
3
Exclusive to Howdens
Dear Customer
Congratulations on your choice of energy efficient larder fridge.
• Please read these instructions before use to ensure safe and economical
operation of the larder fridge.
• Please keep these instructions in a safe place for your future reference.
• If you have any questions, or if you are not sure about any information
contained in this booklet please contact us - details at the end of the User
Instructions.
This appliance is intended to be used in household and similar domestic
applications, see guarantee page for definition of domestic use*.
Welcome
Warning for hazardous
situations with regard to
life and property.
Warning for
electric shock.
Warning for
risk of fire.
Throughout this manual the
following symbols are used.
IMPORTANT! Fitting a
dierent plug
As the colours of the wires
in the mains lead of this
appliance may not correspond
with the coloured markings
identifying the terminals in your
plug proceed as follows:
(See diagram).
1. Connect the green-yellow
or green (Earth) wire to the
terminal in the plug marked
‘E’ or with the symbol
FITTED WITH
BS 1362 13A FUSE ALWAYS
FIT BS 1362 REPLACEMENT
CARTRIDGE FUSE
GREEN &
YELLOW
OR
GREEN
N
BLUE
OR
BLACK
L
BROWN
OR
RED
22mm.
6mm.
6mm.
6mm. 32mm.
12mm.
FUSE
CORD GRIP
Waste Electrical and Electronic Equipment
(WEEE).
The waste electrical symbol on this product indicates
that this product may not be treated as household
waste. Instead it should be handed over to the
applicable collection point for recycling of electrical and
electronic equipment. Disposal must be carried out in
accordance with local environmental regulations for
waste disposal. For more detailed information please
contact your local council household waste site.
This appliance meets all relevant safety standards.
ELECTRICAL REQUIREMENTS
Before you insert the plug into the wall socket make sure the
voltage and frequency shown in the rating plate inside the
appliance corresponds to your electricity supply. We
recommend that this appliance is connected to the mains
supply via a suitable switched and fused socket in a readily
accessible position. Should the mains lead of the appliance
become damaged or should it need replacing at any time, it must
be replaced by a suitably competent person.
WARNING! THIS APPLIANCE MUST BE EARTHED
If the fitted moulded plug is not suitable , then the plug should be
cut off . Destroy the old plug which is cut off as a plug with bared
cables could present a shock hazard if inserted into a socket.
The moulded plug on this appliance incorporates a 13 A fuse.
Should the fuse need to be replaced an ASTA BEAB approved BS
1362 fuse of the same rating must be used. Do not forget to refit
the fuse cover. In the event of losing the fuse cover the plug must
not be used until a replacement fuse cover has been fitted.
IMPORTANT! FITTING A DIFFERENT PLUG . As the colours of the wires in
the mains lead of this appliance may not correspond with the
coloured markings identifying the terminals in your plug proceed
as follows: (See diagram).
1. Connect the green-yellow or
green (Earth) wire to the
terminal in the plug marked 'E'
or with the symbol or
coloured green and yellow or
green.
2. Connect the blue (Neutral)
wire to the terminal in the plug
marked 'N' or coloured black.
3. Connect the brown (Live) wire
to the terminal in the plug
marked 'L' or coloured red.
4 5
or
coloured green and yellow or
green.
2. Connect the blue (Neutral)
wire to the terminal in the
plug marked ‘N’ or coloured
black.
3. Connect the brown (Live)
wire to the terminal in the
plug marked ‘L’ or coloured
red.
FITTED WITH
BS 1362 13A FUSE ALWAYS
FIT BS 1362 REPLACEMENT
CARTRIDGE FUSE
GREEN &
YELLOW
OR
GREEN
N
BLUE
OR
BLACK
L
BROWN
OR
RED
22mm.
6mm.
6mm.
6mm. 32mm.
12mm.
FUSE
CORD GRIP
Information
The model’s technical information can be retrieved by scanning the
QR code on the Energy label and proceeding to the website entering
the model identifier.
1
•Leave to stand for at least 4 hours before switching on to allow
compressor oil to settle, especially if transported horizontally.
•If you are discarding an old refrigerator please ensure any door
lock or latch is disabled so as to not trap children
•Do not dispose of the appliance on a fire. The appliance
contains substances in the insulation (Cyclopentane) and in the
cooling system (R600a gas) which are highly flammable.
Therefore be careful not to damage the appliance or cooling
system. If damaged avoid sources of ignition and ventilate the
room immediately.
•Contact your Local Council for disposal of an old appliance.
•We do not recommend the use of this appliance in unheated
rooms or outbuildings.
•This refrigerator must only be used for it's intended purpose of
storing edible foodstuffs.
•This appliance is not suitable for freezing foodstuffs.
•Ensure that the plug remains accessible after installation. DO
NOT USE multi-socket adapters and leads.
•Failure to observe the installation and safety instructions may
invalidate your Guarantee and cause harm to the person or
property.
3 year guarantee available.
Register your appliance within 90 days2
By registering your appliance and creating an account, we
will keep you up to date with the latest product information
and notify you immediately of any important product updates
1 Lines are open Monday to Friday 9am to 5pm. Calls will be charged at your local rate
and may be recorded and monitored for training and quality purposes.
2 So that in the event of an important product update, or recall, we can contact you.
Call now1
0333 010 0009
Alternatively, visit www.howdens.com/appliance-registration
Free 3 year
guarantee
L
A
M
O
N
A
A
P
P
L
I
A
N
C
E
G
U
A
R
A
N
T
E
E
YEARS
3
SUPPLIER’S NAME MODEL IDENTIFIER
A
A
(*) SUPPLIER’S NAME MODEL IDENTIFIER
A
A
(*)
Information
The model’s technical information can be r etrieved b y scanning the Q R code on the
Energy label and proceeding to the website entering the model identifier.
Congratulations on your choice of LAMONA appliance.
IMPORTANT !
DO NOT connect the appliance to the electricity supply until all
packing and transit protectors have been removed.
Please read these instructions carefully to ensure safe and
trouble-free operation.
Check that the appliance is undamaged upon receipt. NEVER
install a damaged appliance
WARNING !
10 11www.howdens.com
Built-Under Larder Fridge LAM6000 Instructions and Installation
3
Exclusive to Howdens
Dear Customer
Congratulations on your choice of energy efficient larder fridge.
• Please read these instructions before use to ensure safe and economical
operation of the larder fridge.
• Please keep these instructions in a safe place for your future reference.
• If you have any questions, or if you are not sure about any information
contained in this booklet please contact us - details at the end of the User
Instructions.
This appliance is intended to be used in household and similar domestic
applications, see guarantee page for definition of domestic use*.
Welcome
Warning for hazardous
situations with regard to
life and property.
Warning for
electric shock.
Warning for
risk of fire.
Throughout this manual the
following symbols are used.
Transport Instructions
• The appliance should be
transported only in a vertical
upright position.
• If during the course of transport
the appliance has to be
transported horizontally, it must
only be laid on its left hand side
(when standing in front of the
appliance). After bringing it to
upright position,it must not be
operated for at least 4 hours to
allow the cooling system to settle.
• Failure to comply with the
above instructions could result
in damage occuring to the
appliance. The manufacturer will
not be held responsible if these
instructions are disregarded.
• The appliance must be
protected against rain, moisture
and other atmospheric
influences.
• Empty any water in the drain
tray before moving see section
‘Defrosting’ and ‘Cleaning &
Care’ for further information.
3
Exclusive to Howdens
Dear Customer
Congratulations on your choice of energy efficient larder fridge.
• Please read these instructions before use to ensure safe and economical
operation of the larder fridge.
• Please keep these instructions in a safe place for your future reference.
• If you have any questions, or if you are not sure about any information
contained in this booklet please contact us - details at the end of the User
Instructions.
This appliance is intended to be used in household and similar domestic
applications, see guarantee page for definition of domestic use*.
Welcome
Warning for hazardous
situations with regard to
life and property.
Warning for
electric shock.
Warning for
risk of fire.
Throughout this manual the
following symbols are used.
WARNING!
• Make sure the plastic
evaporating pan at the back of
the product is located correctly
before installation.
• Care should be taken with the
grilles and pipework at the
rear of the appliance to avoid
damage to the product and
person.
• This appliance is not designed
for stacking with another
appliance.
• Do not trap and damage mains
cable under appliance,
• Do not allow children to play with
the appliance or controls.
• Do not sit or stand on appliance.
1. Using the appliance
Before you start using the
refrigerator check that:
1. The feet have been adjusted
and the appliance is secured
to the cabinets plumb & level.
2. The interior is clean, dry and air
can circulate freely.
See ‘Cleaning and Care’.
3. Insert the plug into the wall
socket and switch on the
electricity supply. When the
door is open the interior light
will come on.
(*Ensure socket is accessible
after installation)
4. As the compressor starts up
various noises may be heard.
The liquid and gases sealed
within the refrigeration system
may give rise to noise, whether
the compressor is running or
not. This is normal.
5. We recommend that you set
the thermostat knob at 3 (three)
and monitor the temperature
to ensure the appliance
maintains the desired, safe
storage temperature. (c. 4°-5°C
normally)
6. Do not load the appliance
immediately after it is switched
on. Wait until the correct
storage temperature has
been reached. (2-3 hours).
We recommend that you
check the temperature with
an accurate thermometer
periodically.
Temperature control and
adjustment
Operating temperature is
controlled by the thermostat
dial (see image). Setting 5 is the
coldest position.
The average fridge temperature
is recommended to be no higher
than +5°C, Initially set the dial to
3 and check the temperature
after 24hrs.
Some sections of the fridge are
warmer (e.g. the salad crisper and
the upper area) This is normal.
During summer the dial may need
to be turned colder.
Frequent door opening causes
loses cooling, so close the door as
soon as possible.
If excess ice develops turn dial to
a warmer setting until ice defrosts
and then return to normal setting.
Important Note:
Ice formation at the back is
normal during normal use.
SWITCHING THE APPLIANCE ON
Before you start using the refrigerator check that:
1. The feet have been adjusted and the appliance is secured to
the cabinets plumb & level.
2. The interior is clean, dry and air can circulate freely.
See 'Cleaning and Care'.
3. Insert the plug into the wall socket and switch on the electricity
supply. When the door is open the interior light will come on.
(*Ensure socket is accessible after installation)
4. As the compressor starts up various noises may be heard. The
liquid and gases sealed within the refrigeration system may give
rise to noise, whether the compressor is running or not. This is
normal.
5. We recommend that you set the thermostat knob at 3 (three)
and monitor the temperature to ensure the appliance maintains
the desired, safe storage temperature. (c. 4°-5°C normally)
6. Do not load the appliance immediately after it is switched on.
Wait until the correct storage temperature has been reached.
2-3 hours) We recommend that you check the temperature with
an accurate thermometer periodically.
10 11
Important Note :
Ice formation at the back is normal during normal use .
DEFROSTING
The larder fridge defrosts automatically.
During defrosting water droplets will form at the back of
the larder fridge ,where the concealed evaporator is
located. Some droplets may remain on the rear liner and
refreeze when defrosting is completed.
The water from these droplets runs down a drain tube via
the collection channel at the rear wall (1). This water is
collected and evaporated in a special container at the
back of the appliance.
Do not use pointed or sharp-edged objects, such as
knives, forks to remove any droplets which have
refrozen.
*Ensure foodstuffs and containers etc. do not contact
the rear wall as ice will form across and water will leak
into the refrigerator.
* If at any time the
defrost water does
not drain from the
collection channel, check
to ensure that no food
particles have blocked
the drain tube. The drain
tube can be cleared by
pushing the special
plastic plunger down the
drain tube.
1
2
TEMPERATURE CONTROL AND ADJUSTMENT
Operating temperature is controlled by the
thermostat dial (see image). Setting 5 is the coldest
position.
The average fridge temperature is recommended to be no higher
than +5°C, Initially set the dial to 3 and check the temperature
after 24hrs.
Some sections of the fridge are warmer (e.g. the salad crisper
and the upper area) This is normal.
During summer the dial may need to be turned colder.
Frequent door opening causes loses cooling, so close the door as
soon as possible.
If excess ice develops turn dial to a warmer setting until ice
defrosts and then return to normal setting.
12 13www.howdens.com
Built-Under Larder Fridge LAM6000 Instructions and Installation
Defrosting
The larder fridge defrosts
automatically.
During defrosting water droplets
will form at the back of the larder
fridge, where the concealed
evaporator is located. Some
droplets may remain on the rear
liner and refreeze when defrosting
is completed.
The water from these droplets
runs down a drain tube via the
collection channel at the rear wall
1. This water is collected and
evaporated in a special container
at the back of the appliance.
Do not use pointed or sharp-
edged objects, such as knives,
forks to remove any droplets which
have refrozen.
*Ensure foodstus and
containers etc. do not contact
the rear wall as ice will form
across and water will leak into
the refrigerator.
If at any time the defrost water
does not drain from the defrost
drain channel 1, check for a
blockage.
Food particles may have blocked
the drain tube. The drain tube can
be cleared by pushing the special
plastic plunger down the drain
tube 2.
Food Storage Examples (See image)
•Fresh wrapped produce can be placed on the shelf.
•Fresh fruit and vegetables should be cleaned and stored
in the salad crisper drawer.
•Bottles can be placed in the door section.
•
•
To store raw meat, wrap in polythene bags and place on
the lowest shelf.
Do not allow raw food to come into contact with cooked
food in order to avoid contamination.
•For safety, only store raw meat for two to three days.
•Shelves incorporate rear stops and can tilt for storing
bottles.
•Lift shelf to clear grooves when adjusting.
•To tilt a shelf, place the back of the shelf one level below
the front of the shelf. To remove a tilted shelf, first release
the back off the grooves and then pull it away.
•Keep food packed, wrapped or covered.
•Allow hot food and beverages to cool before placing them
in the refrigerator.
•Do not store explosive substances in the refrigerator.
•High proof alcohol must be stored upright in
sealed containers.
•Do not store food in opened cans.
•
•
Some fruit and vegetables suffer damage if kept at
temperatures near 0°C. Therefore wrap pineapples,
melon, cucumbers, tomatoes and similar produce in
polythene bags.
Shelves, racks, crisper bins, dairy compartments,
drawers, bottle grippers are all removable.
•Always wrap food using a suitable packaging material
before storing in your appliance and avoid contact with
the rear wall.
Food Storage Examples (See image)
1. Baked, chilled cooked food, dairy products.
2. Meat, sausages, cold cuts, cans.
3. Fruit, vegetables, salads.
4. Tubes, small bottles and cans.
5. Egg tray.
6. Butter, cheese, dairy products.
7. Beverages, large bottles.
The following guidelines and
recommendations are suggested to obtain the
best results and storage hygiene.
•Appliance is for the short term storage of fresh food
and drinks.
•Cooked dishes must be stored in airtight covered
containers and are best placed on either of the
removable shelves.
•Fresh wrapped produce can be placed directly on
the shelf
1213
Baked, chilled cooked
food, dairy products
Tubes, small
bottles and cans Egg tray
Butter, cheese,
dairy products
Meat, sausages,
cold cuts, cans
Fruit, vegetables,
salads
Beverages,
large bottles
SWITCHING THE APPLIANCE ON
Before you start using the refrigerator check that:
1. The feet have been adjusted and the appliance is secured to
the cabinets plumb & level.
2. The interior is clean, dry and air can circulate freely.
See 'Cleaning and Care'.
3. Insert the plug into the wall socket and switch on the electricity
supply. When the door is open the interior light will come on.
(*Ensure socket is accessible after installation)
4. As the compressor starts up various noises may be heard. The
liquid and gases sealed within the refrigeration system may give
rise to noise, whether the compressor is running or not. This is
normal.
5. We recommend that you set the thermostat knob at 3 (three)
and monitor the temperature to ensure the appliance maintains
the desired, safe storage temperature. (c. 4°-5°C normally)
6. Do not load the appliance immediately after it is switched on.
Wait until the correct storage temperature has been reached.
2-3 hours) We recommend that you check the temperature with
an accurate thermometer periodically.
10 11
Important Note :
Ice formation at the back is normal during normal use .
DEFROSTING
The larder fridge defrosts automatically.
During defrosting water droplets will form at the back of
the larder fridge ,where the concealed evaporator is
located. Some droplets may remain on the rear liner and
refreeze when defrosting is completed.
The water from these droplets runs down a drain tube via
the collection channel at the rear wall (1). This water is
collected and evaporated in a special container at the
back of the appliance.
Do not use pointed or sharp-edged objects, such as
knives, forks to remove any droplets which have
refrozen.
*Ensure foodstuffs and containers etc. do not contact
the rear wall as ice will form across and water will leak
into the refrigerator.
* If at any time the
defrost water does
not drain from the
collection channel, check
to ensure that no food
particles have blocked
the drain tube. The drain
tube can be cleared by
pushing the special
plastic plunger down the
drain tube.
1
2
TEMPERATURE CONTROL AND ADJUSTMENT
Operating temperature is controlled by the
thermostat dial (see image). Setting 5 is the coldest
position.
The average fridge temperature is recommended to be no higher
than +5°C, Initially set the dial to 3 and check the temperature
after 24hrs.
Some sections of the fridge are warmer (e.g. the salad crisper
and the upper area) This is normal.
During summer the dial may need to be turned colder.
Frequent door opening causes loses cooling, so close the door as
soon as possible.
If excess ice develops turn dial to a warmer setting until ice
defrosts and then return to normal setting.
1
2
14 15www.howdens.com
Built-Under Larder Fridge LAM6000 Instructions and Installation
The following guidelines and recommendations are
suggested to obtain the best results and storage hygiene
• Appliance is for the short term
storage of fresh food and drinks.
• Cooked dishes must be stored in
airtight covered containers and
are best placed on either of the
removable shelves.
• Fresh wrapped produce can be
placed directly on the shelf
• Fresh wrapped produce can be
placed on the shelf.
• Fresh fruit and vegetables
should be cleaned and stored
in the
salad crisper drawer.
• Bottles can be placed in the
door section.
• To store raw meat, wrap in
polythene bags and place on
the lowest shelf.
• Do not allow raw food to come
into contact with cooked food
in order to avoid contamination.
• For safety, only store raw meat
for two to three days.
• Shelves incorporate rear stops
and can tilt for storing bottles.
• Lift shelf to clear grooves when
adjusting.
• To tilt a shelf, place the back of
the shelf one level below the
front of the shelf. To remove a
tilted shelf, first release the back
o the grooves and then pull it
away.
• Keep food packed, wrapped or
covered.
• Allow hot food and beverages
to cool before placing them in
the refrigerator.
• Do not store explosive
substances in the refrigerator.
• High proof alcohol must
be stored upright in sealed
containers.
• Do not store food in opened
cans.
• Some fruit and vegetables suer
damage if kept at temperatures
near 0°C. Therefore wrap
pineapples, melon, cucumbers,
tomatoes and similar produce in
polythene bags.
• Shelves, racks, crisper bins, dairy
compartments, drawers, bottle
grippers are all removable.
• Always wrap food using a
suitable packaging material
before storing in your appliance
and avoid contact with the rear
wall.
Food storage advice and recommendations to avoid
waste food and energy
Do - Clean your larder refrigerator
regularly.
Do - Store raw meat in the lower
part of the refrigerator below
cooked food and dairy
products
Do - Wrap and cover all items
to prevent ‘drying-out’ and
to avoid smell and cross
contamination.
Do - Store food as short a time as
possible to avoid bacterial
growth.
Do - Keep the refrigerator
suciently cool to inhibit
bacterial growth.
Do - Observe use-by dates on
foodstus.
Do - Clean salad and remove
damaged leaves
Do - Leave lettuce, cabbage and
cauliflower on the stem.
Do - Wrap cheese in greaseproof
paper and polythene,
removing as much air as
possible.
Do - Try not to overload the door
trays.
Don’t - Store bananas in your
fridge.
Don’t - Store melon in your fridge.
It can be chilled for
short periods as long as
it is wrapped to avoid it
flavouring other food.
Don’t - Leave the door open
for long periods as this
will make the larder
refrigerator more costly
to run.
Don’t - Store poisonous or any
dangerous substances
in the larder refrigerator.
(Your larder refrigerator
has been designed for
the storage of edible
foodstus only).
Don’t - Consume food which
has been stored for an
excessive time in the
larder refrigerator.
Don’t - Store cooked and fresh
food together in the same
container. They should
be packaged and stored
separately.
Don’t - Let defrosting food or
food juices drip onto food
below.
16 17www.howdens.com
Built-Under Larder Fridge LAM6000 Instructions and Installation
2. Cleaning and Care
CLEANING AND CARE
* We recommend that you switch off the larder refrigerator at
the socket outlet and pull out the mains plug before cleaning.
* Never use any sharp instruments or abrasive substances,
soap, household cleaner, detergent and wax polish for cleaning.
* Use luke warm water to clean the cabinet of the refrigerator
and wipe it dry.
* Use a damp cloth wrung out in a solution of one teaspoon of
bicarbonate of soda to one pint of water to clean the interior and
wipe it dry.
* Make sure that no water enters the temperature control box.
* If the larder refrigerator is not going to be used for a long
period of time switch it off, remove all food, clean it and leave
the door ajar.
* Check door seals regularly to ensure they are clean and free
from food particles
* Removal of door trays:
•To remove a door tray, remove all the contents and
then gently push the tray upwards at the outer edges.
1617
Starting at a corner, gently
pull the seal away, working
along puling the seal out of
the channel.
To re-fit start at a corner and
firmly press the seal into
place. Work along the seal
pressing the seal into the
channel.
* Cleaning of air vent grilles
•Keep the air vents free from obstruction and clean
using a soft brush and vacuum cleaner.
• We recommend that you switch
o the larder refrigerator at the
socket outlet and pull out the
mains plug before cleaning.
• Never use any sharp instruments
or abrasive substances, soap,
household cleaner, detergent
and wax polish for cleaning.
• Use luke warm water to clean
the cabinet of the refrigerator
and wipe it dry.
• Use a damp cloth wrung out in
a solution of one teaspoon of
bicarbonate of soda to one pint
of water to clean the interior
and wipe it dry.
• Make sure that no water enters
the temperature control box.
• If the larder refrigerator is not
going to be used for a long
period of time switch it o,
remove all food, clean it and
leave the door ajar.
• Check door seals regularly to
ensure they are clean and free
from food particles.
• Starting at a corner, gently
pull the seal away, working
along puling the seal out of the
channel.
• To re-fit start at a corner and
firmly press the seal into place.
Work along the seal pressing the
seal into the channel.
CLEANING AND CARE
* We recommend that you switch off the larder refrigerator at
the socket outlet and pull out the mains plug before cleaning.
* Never use any sharp instruments or abrasive substances,
soap, household cleaner, detergent and wax polish for cleaning.
* Use luke warm water to clean the cabinet of the refrigerator
and wipe it dry.
* Use a damp cloth wrung out in a solution of one teaspoon of
bicarbonate of soda to one pint of water to clean the interior and
wipe it dry.
* Make sure that no water enters the temperature control box.
* If the larder refrigerator is not going to be used for a long
period of time switch it off, remove all food, clean it and leave
the door ajar.
* Check door seals regularly to ensure they are clean and free
from food particles
* Removal of door trays:
•To remove a door tray, remove all the contents and
then gently push the tray upwards at the outer edges.
1617
Starting at a corner, gently
pull the seal away, working
along puling the seal out of
the channel.
To re-fit start at a corner and
firmly press the seal into
place. Work along the seal
pressing the seal into the
channel.
* Cleaning of air vent grilles
•Keep the air vents free from obstruction and clean
using a soft brush and vacuum cleaner.
CLEANING AND CARE
* We recommend that you switch off the larder refrigerator at
the socket outlet and pull out the mains plug before cleaning.
* Never use any sharp instruments or abrasive substances,
soap, household cleaner, detergent and wax polish for cleaning.
* Use luke warm water to clean the cabinet of the refrigerator
and wipe it dry.
* Use a damp cloth wrung out in a solution of one teaspoon of
bicarbonate of soda to one pint of water to clean the interior and
wipe it dry.
* Make sure that no water enters the temperature control box.
* If the larder refrigerator is not going to be used for a long
period of time switch it off, remove all food, clean it and leave
the door ajar.
* Check door seals regularly to ensure they are clean and free
from food particles
* Removal of door trays:
•To remove a door tray, remove all the contents and
then gently push the tray upwards at the outer edges.
1617
Starting at a corner, gently
pull the seal away, working
along puling the seal out of
the channel.
To re-fit start at a corner and
firmly press the seal into
place. Work along the seal
pressing the seal into the
channel.
* Cleaning of air vent grilles
•Keep the air vents free from obstruction and clean
using a soft brush and vacuum cleaner.
Removal of door trays:
• To remove a door tray, remove all the contents and then gently push
the tray upwards at the outer edges.
Cleaning of air vent grilles
• Keep the air vents free from obstruction and clean using a soft brush
and vacuum cleaner.
18 19www.howdens.com
Built-Under Larder Fridge LAM6000 Instructions and Installation
Replacing the interior light bulb (See diagram)
14
DO'S AND DON'TS
Do-
-Clean your larder refrigerator regularly.
-Store raw meat in the lower part of the refrigerator
below cooked food and dairy products
-Wrap and cover all items to prevent 'drying-out' and to
avoid smell and cross contamination.
-Store food as short a time as possible to avoid bacterial
growth.
-Keep the refrigerator sufficiently cool to inhibit bacterial
growth.
-Observe use-by dates on foodstuffs.
-Clean salad and remove damaged leaves
-Leave lettuce, cabbage and cauliflower on the stem.
-Wrap cheese in greaseproof paper and polythene,
removing as much air as possible.
-Try not to overload the door trays.
-Store bananas in your fridge.
-Store melon in your fridge. It can be chilled for short periods
as long as it is wrapped to avoid it flavouring other food.
- Leave the door open for long periods as this will make the
larder refrigerator more costly to run.
- Store poisonous or any dangerous substances in the larder
refrigerator. (Your larder refrigerator has been designed for
the storage of edible foodstuffs only).
- Consume food which has been stored for an excessive time
in the larder refrigerator.
- Store cooked and fresh food together in the same container.
They should be packaged and stored separately
-Let defrosting food or food juices drip onto food below.
PROBLEM SOLVING/TROUBLE SHOOTING
If the appliance does not operate when switched on, check;
•The plug is inserted properly in the socket and that the power
supply is on.
•If the fuse has blown/circuit breaker has tripped/main switch
has been turned off.
•The temperature control has been set correctly.
(Checking these items may avoid a charge if a guarantee
service call is made)
15
REPLACING THE INTERIOR LIGHT BULB (See diagram)
Should the light fail to work, switch off at the plug socket and pull
out the plug. Follow the instructions below to check if the light bulb
has worked itself loose or needs replacing.
If the light needs replacing, fit a suitable E14 screw cap type 15w
(Max) lamp. (Available from Lamona spares)
Replace as follows:
1. Switch off at the plug socket and pull out the plug.
2. Remove the light diffuser cover as shown in figure (b-c).
(You may find it useful to remove the shelf for easy access.)
Replace the failed lamp.
3. Re-fit the light diffuser cover as shown in figure (d).
Push firmly to ensure cover is fitted properly.
4. Carefully dispose of the failed lamp.
a b c d
1
2
3
Push firmly
Don't-
Should the light fail to work, switch
o at the plug socket and pull out
the plug. Follow the instructions
below to check if the light bulb
has worked itself loose or needs
replacing.
If the light needs replacing, fit
a suitable E14 screw cap type
15w (Max) lamp. (Available from
Lamona spares)
Replace as follows:
1. Switch o at the plug socket
and pull out the plug.
2. Remove the light diuser cover
as shown in figure B-C.
(You may find it useful to
remove the shelf for easy
access.) Replace the failed
lamp.
3. Re-fit the light diuser cover as
shown in figure D.
Push firmly to ensure cover is
fitted properly.
4. Carefully dispose of the failed
lamp.
To avoid any loss in performance, air suction channels should not be
obstructed. (140cm2) Minimum distance between the wall and the
appliance must be at least 10 mm.
6 7
•The appliance should be transported only in a vertical upright
position.
•If during the course of transport the appliance has to be
transported horizontally, it must only be laid on its left hand
side (when standing in front of the appliance). After bringing it
to upright position,it must not be operated for at least 4 hours
to allow the cooling system to settle.
•Failure to comply with the above instructions could result in
damage occuring to the appliance. The manufacturer will not be
held responsible if these instructions are disregarded.
•The appliance must be protected against rain, moisture and
other atmospheric influences.
•Empty any water in the drain tray before moving see section
“Defrosting” and “Cleaning & Care” for further information.
IMPORTANT :
To avoid any loss in performance, air suction channels should
not be obstructed. (140 cm 2) Minimum distance between the
wall and the appliance must be at least 10 mm.
•Correct adjustment of feet avoids excessive vibration and noise.
•Refer to "Cleaning and Care" section to prepare your appliance for
use.
•This appliance has been designed to operate in ambient temperatures
between +10 and +32 degrees C. if the appliance is installed in an
unheated / cold room (E.g.: garage etc.) then the appliance may not
operate correctly and as a result; the storage time of food may be
reduced.
10 mm
10 mm
Wall
Appliance
TRANSPORTTRANSPORTAATION INSTRUCTIONSTION INSTRUCTIONS
•Make sure the plastic evaporating pan at the back of the
product is located correctly before installation.
•Care should be taken with the grilles and pipework at the rear
of the appliance to avoid damage to the product and person.
•This appliance is not designed for stacking with another
appliance.
•Do not trap and damage mains cable under appliance,
•Do not allow children to play with the appliance or controls.
•Do not sit or stand on appliance
INSTALLATION INSTRUCTIONS
•Do not operate this appliance unless installed into furniture.
•The appliance should be located on a smooth solid surface.
•The front and back feet can be adjusted as required to ensure
that the appliance is standing plumb and level.
6 7
•The appliance should be transported only in a vertical upright
position.
•If during the course of transport the appliance has to be
transported horizontally, it must only be laid on its left hand
side (when standing in front of the appliance). After bringing it
to upright position,it must not be operated for at least 4 hours
to allow the cooling system to settle.
•Failure to comply with the above instructions could result in
damage occuring to the appliance. The manufacturer will not be
held responsible if these instructions are disregarded.
•The appliance must be protected against rain, moisture and
other atmospheric influences.
•Empty any water in the drain tray before moving see section
“Defrosting” and “Cleaning & Care” for further information.
IMPORTANT :
To avoid any loss in performance, air suction channels should
not be obstructed. (140 cm 2) Minimum distance between the
wall and the appliance must be at least 10 mm.
•Correct adjustment of feet avoids excessive vibration and noise.
•Refer to "Cleaning and Care" section to prepare your appliance for
use.
•This appliance has been designed to operate in ambient temperatures
between +10 and +32 degrees C. if the appliance is installed in an
unheated / cold room (E.g.: garage etc.) then the appliance may not
operate correctly and as a result; the storage time of food may be
reduced.
10 mm
10 mm
Wall
Appliance
TRANSPORTTRANSPORTAATION INSTRUCTIONSTION INSTRUCTIONS
•Make sure the plastic evaporating pan at the back of the
product is located correctly before installation.
•Care should be taken with the grilles and pipework at the rear
of the appliance to avoid damage to the product and person.
•This appliance is not designed for stacking with another
appliance.
•Do not trap and damage mains cable under appliance,
•Do not allow children to play with the appliance or controls.
•Do not sit or stand on appliance
INSTALLATION INSTRUCTIONS
•Do not operate this appliance unless installed into furniture.
•The appliance should be located on a smooth solid surface.
•The front and back feet can be adjusted as required to ensure
that the appliance is standing plumb and level.
3. Installation
3
Exclusive to Howdens
Dear Customer
Congratulations on your choice of energy efficient larder fridge.
• Please read these instructions before use to ensure safe and economical
operation of the larder fridge.
• Please keep these instructions in a safe place for your future reference.
• If you have any questions, or if you are not sure about any information
contained in this booklet please contact us - details at the end of the User
Instructions.
This appliance is intended to be used in household and similar domestic
applications, see guarantee page for definition of domestic use*.
Welcome
Warning for hazardous
situations with regard to
life and property.
Warning for
electric shock.
Warning for
risk of fire.
Throughout this manual the
following symbols are used.
Installation Instructions
• Do not operate this appliance
unless installed into furniture.
• The appliance should be
located on a smooth solid
surface.
• The front and back feet can be
adjusted as required to ensure
that the appliance is standing
plumb and level.
• Correct adjustment of feet
avoids excessive vibration and
noise.
• Refer to ‘Cleaning and Care’
section to prepare your
appliance for use.
• This appliance has been
designed to operate in ambient
temperatures between +10 and
+32 degrees C. if the appliance
is installed in an unheated / cold
room (E.g.: garage etc.) then
the appliance may not operate
correctly and as a result; the
storage time of food may be
reduced.
A B C D
20 21www.howdens.com
Built-Under Larder Fridge LAM6000 Instructions and Installation
Reversing the door opening
Follow the step by step instructions
and the diagram below.
Switch o at the socket
outlet and pull out the
mains plug. Remove all
food, loose items and
fittings from inside the
appliance and door
shelves.
• Carefully remove the lower then
the upper Torx screws that hold
the door to the hinges, then
remove door, 1.
• 2 Open hinges fully then
carefully remove the self tap
countersunk screws holding
the hinges to the cabinet.
• 7, 8 Re-fit hinges to opposite
side, tighten the screws firmly.
• 9, 10 Re-fit door, loosely fixing
the top screws first, and then fit
the lower screws.
• When all screws are fitted; fully
tighten and check door for
alignment.
11 Also at this stage remove the
2 x small side-fixing brackets and
re-locate to opposite side.
Prepare new holes for
hinge screws -
Carefully place the self tap screws
into the new fixing points, applying
gentle pressure until they start to
bite (at this point it may help to
have someone at the back of
appliance to support).
For ease of fixing we recommend
screwing all the way in and then
ease back out.
• 3, 4, 5, 6 Remove the
plastic covers from the left hand
hinge fixing points and carefully
re-insert into the right hand
holes where the hinges were
fitted.
REVERSING THE DOOR OPENING
Follow the step by step instructions and the diagram
below. Numbers in brackets refer to the diagrams.
•Switch off at the socket outlet and pull out the
mains plug.
all food, loose items and fittings from•Remove
inside the appliance and door shelves.
(1, 2.) Carefully remove the lower then the upper Torx screws
that hold the door to the hinges, then remove door.
then carefully remove the self tap (1, 2.) Open hinges fully
countersunk screws holding the hinges to the cabinet.
Remove the plastic covers from the L/H hinge
and carefully re-insert into the R/H holes where
were fitted.
(3, 4. 5, 6.)
fixing points
the hinges
Prepare new holes for hinge screws -
Carefully place the self tap screws into the new fixing points,
applying gentle pressure until they start to bite (at this point it
may help to have someone at the back of appliance to support)
fixing we recommend screwing all the way in-For ease of
-and then ease back out.-
(7,8) Re-fit hinges to opposite side, tighten the screws firmly.
(9,10) Re-fit door, loosely fixing the top screws first, and then
fit the lower screws.
When all screws are fitted; fully tighten and check door for
alignment.
1
2
1
2
4
3
9
10
5
6
8
7
9
8
*Also at this stage remove the 2 x
small side-fixing brackets and
re-locate to opposite side.
REVERSING THE DOOR OPENING
Follow the step by step instructions and the diagram
below. Numbers in brackets refer to the diagrams.
•Switch off at the socket outlet and pull out the
mains plug.
all food, loose items and fittings from•Remove
inside the appliance and door shelves.
(1, 2.) Carefully remove the lower then the upper Torx screws
that hold the door to the hinges, then remove door.
then carefully remove the self tap (1, 2.) Open hinges fully
countersunk screws holding the hinges to the cabinet.
Remove the plastic covers from the L/H hinge
and carefully re-insert into the R/H holes where
were fitted.
(3, 4. 5, 6.)
fixing points
the hinges
Prepare new holes for hinge screws -
Carefully place the self tap screws into the new fixing points,
applying gentle pressure until they start to bite (at this point it
may help to have someone at the back of appliance to support)
fixing we recommend screwing all the way in-For ease of
-and then ease back out.-
(7,8) Re-fit hinges to opposite side, tighten the screws firmly.
(9,10) Re-fit door, loosely fixing the top screws first, and then
fit the lower screws.
When all screws are fitted; fully tighten and check door for
alignment.
9
8
*Also at this stage remove the 2 x
small side-fixing brackets and
re-locate to opposite side.
1
3
2
4
REVERSING THE DOOR OPENING
Follow the step by step instructions and the diagram
below. Numbers in brackets refer to the diagrams.
•Switch off at the socket outlet and pull out the
mains plug.
all food, loose items and fittings from•Remove
inside the appliance and door shelves.
(1, 2.) Carefully remove the lower then the upper Torx screws
that hold the door to the hinges, then remove door.
then carefully remove the self tap (1, 2.) Open hinges fully
countersunk screws holding the hinges to the cabinet.
Remove the plastic covers from the L/H hinge
and carefully re-insert into the R/H holes where
were fitted.
(3, 4. 5, 6.)
fixing points
the hinges
Prepare new holes for hinge screws -
Carefully place the self tap screws into the new fixing points,
applying gentle pressure until they start to bite (at this point it
may help to have someone at the back of appliance to support)
fixing we recommend screwing all the way in-For ease of
-and then ease back out.-
(7,8) Re-fit hinges to opposite side, tighten the screws firmly.
(9,10) Re-fit door, loosely fixing the top screws first, and then
fit the lower screws.
When all screws are fitted; fully tighten and check door for
alignment.
9
8
*Also at this stage remove the 2 x
small side-fixing brackets and
re-locate to opposite side.
2
1
REVERSING THE DOOR OPENING
Follow the step by step instructions and the diagram
below. Numbers in brackets refer to the diagrams.
•Switch off at the socket outlet and pull out the
mains plug.
all food, loose items and fittings from•Remove
inside the appliance and door shelves.
(1, 2.) Carefully remove the lower then the upper Torx screws
that hold the door to the hinges, then remove door.
then carefully remove the self tap (1, 2.) Open hinges fully
countersunk screws holding the hinges to the cabinet.
Remove the plastic covers from the L/H hinge
and carefully re-insert into the R/H holes where
were fitted.
(3, 4. 5, 6.)
fixing points
the hinges
Prepare new holes for hinge screws -
Carefully place the self tap screws into the new fixing points,
applying gentle pressure until they start to bite (at this point it
may help to have someone at the back of appliance to support)
fixing we recommend screwing all the way in-For ease of
-and then ease back out.-
(7,8) Re-fit hinges to opposite side, tighten the screws firmly.
(9,10) Re-fit door, loosely fixing the top screws first, and then
fit the lower screws.
When all screws are fitted; fully tighten and check door for
alignment.
9
8
*Also at this stage remove the 2 x
small side-fixing brackets and
re-locate to opposite side.
5
6
7
8
REVERSING THE DOOR OPENING
Follow the step by step instructions and the diagram
below. Numbers in brackets refer to the diagrams.
•Switch off at the socket outlet and pull out the
mains plug.
all food, loose items and fittings from•Remove
inside the appliance and door shelves.
(1, 2.) Carefully remove the lower then the upper Torx screws
that hold the door to the hinges, then remove door.
then carefully remove the self tap (1, 2.) Open hinges fully
countersunk screws holding the hinges to the cabinet.
Remove the plastic covers from the L/H hinge
and carefully re-insert into the R/H holes where
were fitted.
(3, 4. 5, 6.)
fixing points
the hinges
Prepare new holes for hinge screws -
Carefully place the self tap screws into the new fixing points,
applying gentle pressure until they start to bite (at this point it
may help to have someone at the back of appliance to support)
fixing we recommend screwing all the way in-For ease of
-and then ease back out.-
(7,8) Re-fit hinges to opposite side, tighten the screws firmly.
(9,10) Re-fit door, loosely fixing the top screws first, and then
fit the lower screws.
When all screws are fitted; fully tighten and check door for
alignment.
9
8
*Also at this stage remove the 2 x
small side-fixing brackets and
re-locate to opposite side.
9
10
11
22 23www.howdens.com
Built-Under Larder Fridge LAM6000 Instructions and Installation
Do not tighten top trim screws fully
in case some lateral adjustment is
necessary.
*Fit extension feet for Howdens
standard installation -c.65mm from
floor to lower base
Adjust feet to c. 20mm less
than worktop height and insert
refrigerator into position. Then
adjust feet so appliance is plumb
and level and top trim engages
worktop.
1819
INSTALLATION INSTRUCTIONS
1
A
545
595
598
A
A (mm) 820 - 890 mm
Note
2
mmiinn.. 660000
820-920mm
600
34
Do not tighten top trim screws fully in case some lateral adjustment is necessary
* Fit extension feet for Howdens standard installation -c.65mm from floor to lower base
Adjust feet to c. 20mm less than worktop height and insert refrigerator into position.
Then adjust feet so appliance is plumb and level and top trim engages worktop.
5
mmiinn..555500
1) Do not operate this appliance until it has been installed in the furniture.
2) Height of the product can be adjusted using the adjustable feet and
extension pieces.
3) Fit top decor trim (A) but allow for some lateral adjustment
* Trim plinth for air inlet grilles if necessary
6
6
5
5
mm
18mm infill
For profile kitchen - insert 18mm board below worktop, level with bottom
edge of front profile trim.
Raise refrigerator, level & plumb to board.
(Refrigerator is now set 18mm lower therefore measure and mark frontal
bracket positions +18mm E.g. 25mm + 18mm = 43mm)
1819
INSTALLATION INSTRUCTIONS
1
A
545
595
598
A
A (mm) 820 - 890 mm
Note
2
mmiinn.. 660000
820-920mm
600
34
Do not tighten top trim screws fully in case some lateral adjustment is necessary
* Fit extension feet for Howdens standard installation -c.65mm from floor to lower base
Adjust feet to c. 20mm less than worktop height and insert refrigerator into position.
Then adjust feet so appliance is plumb and level and top trim engages worktop.
5
mmiinn..555500
1) Do not operate this appliance until it has been installed in the furniture.
2) Height of the product can be adjusted using the adjustable feet and
extension pieces.
3) Fit top decor trim (A) but allow for some lateral adjustment
* Trim plinth for air inlet grilles if necessary
6655mm
18mm infill
For profile kitchen - insert 18mm board below worktop, level with bottom
edge of front profile trim.
Raise refrigerator, level & plumb to board.
(Refrigerator is now set 18mm lower therefore measure and mark frontal
bracket positions +18mm E.g. 25mm + 18mm = 43mm)
For profile kitchen - insert 18mm
board below worktop, level with
bottom edge of front profile trim.
Raise refrigerator, level & plumb to
board.
(Refrigerator is now set 18mm lower
therefore measure and mark frontal
bracket positions +18mm.
E.g. 25mm + 18mm = 43mm)
4
5
Note
1. Do not operate this appliance
until it has been installed in the
furniture.
2. Height of the product can be
adjusted using the adjustable
feet and extension pieces.
3. Fit top decor trim (A) but allow for
some lateral adjustment.
*Trim plinth for air inlet grilles if
necessary
1819
INSTALLATION INSTRUCTIONS
1
A
545
595
598
A
A (mm) 820 - 890 mm
Note
2
mmiinn.. 660000
820-920mm
600
34
Do not tighten top trim screws fully in case some lateral adjustment is necessary
* Fit extension feet for Howdens standard installation -c.65mm from floor to lower base
Adjust feet to c. 20mm less than worktop height and insert refrigerator into position.
Then adjust feet so appliance is plumb and level and top trim engages worktop.
5
mmiinn..555500
1) Do not operate this appliance until it has been installed in the furniture.
2) Height of the product can be adjusted using the adjustable feet and
extension pieces.
3) Fit top decor trim (A) but allow for some lateral adjustment
* Trim plinth for air inlet grilles if necessary
6655mm
18mm infill
For profile kitchen - insert 18mm board below worktop, level with bottom
edge of front profile trim.
Raise refrigerator, level & plumb to board.
(Refrigerator is now set 18mm lower therefore measure and mark frontal
bracket positions +18mm E.g. 25mm + 18mm = 43mm)
1819
INSTALLATION INSTRUCTIONS
1
A
545
595
598
A
A (mm) 820 - 890 mm
Note
2
mmiinn.. 660000
820-920mm
600
34
Do not tighten top trim screws fully in case some lateral adjustment is necessary
* Fit extension feet for Howdens standard installation -c.65mm from floor to lower base
Adjust feet to c. 20mm less than worktop height and insert refrigerator into position.
Then adjust feet so appliance is plumb and level and top trim engages worktop.
5
mmiinn..555500
1) Do not operate this appliance until it has been installed in the furniture.
2) Height of the product can be adjusted using the adjustable feet and
extension pieces.
3) Fit top decor trim (A) but allow for some lateral adjustment
* Trim plinth for air inlet grilles if necessary
6655mm
18mm infill
For profile kitchen - insert 18mm board below worktop, level with bottom
edge of front profile trim.
Raise refrigerator, level & plumb to board.
(Refrigerator is now set 18mm lower therefore measure and mark frontal
bracket positions +18mm E.g. 25mm + 18mm = 43mm)
1819
INSTALLATION INSTRUCTIONS
1
A
545
595
598
A
A (mm) 820 - 890 mm
Note
2
mmiinn.. 660000
820-920mm
600
34
Do not tighten top trim screws fully in case some lateral adjustment is necessary
* Fit extension feet for Howdens standard installation -c.65mm from floor to lower base
Adjust feet to c. 20mm less than worktop height and insert refrigerator into position.
Then adjust feet so appliance is plumb and level and top trim engages worktop.
5
mmiinn..555500
1) Do not operate this appliance until it has been installed in the furniture.
2) Height of the product can be adjusted using the adjustable feet and
extension pieces.
3) Fit top decor trim (A) but allow for some lateral adjustment
* Trim plinth for air inlet grilles if necessary
6655mm
18mm infill
For profile kitchen - insert 18mm board below worktop, level with bottom
edge of front profile trim.
Raise refrigerator, level & plumb to board.
(Refrigerator is now set 18mm lower therefore measure and mark frontal
bracket positions +18mm E.g. 25mm + 18mm = 43mm)
1819
INSTALLATION INSTRUCTIONS
1
A
545
595
598
A
A (mm) 820 - 890 mm
Note
2
m
m
i
i
n
n
.
.
6
6
0
0
0
0
820-920mm
600
34
Do not tighten top trim screws fully in case some lateral adjustment is necessary
* Fit extension feet for Howdens standard installation -c.65mm from floor to lower base
Adjust feet to c. 20mm less than worktop height and insert refrigerator into position.
Then adjust feet so appliance is plumb and level and top trim engages worktop.
5
mm
i
i
n
n
.
.
5
5
5
5
0
0
1) Do not operate this appliance until it has been installed in the furniture.
2) Height of the product can be adjusted using the adjustable feet and
extension pieces.
3) Fit top decor trim (A) but allow for some lateral adjustment
* Trim plinth for air inlet grilles if necessary
6655mm
18mm infill
For profile kitchen - insert 18mm board below worktop, level with bottom
edge of front profile trim.
Raise refrigerator, level & plumb to board.
(Refrigerator is now set 18mm lower therefore measure and mark frontal
bracket positions +18mm E.g. 25mm + 18mm = 43mm)
Step-by-step Installation Instructions
1
2 3
24 25www.howdens.com
Built-Under Larder Fridge LAM6000 Instructions and Installation
B
EE
335
25mm
=335mm
2255mm
167.5 167.5
(43mm)
B
EE
335
25mm
=335mm
2255mm
167.5 167.5
(43mm)
7
8
B
EE
335
25mm
=335mm
2
2
5
5
mm
167.5 167.5
(43mm)
6
Measure and fit Frontal
Mark centre line on door, measure down and mark bracket screw holes.
*Check and use your own measurements to suit the installation
(Dimensions shown as a guide only for default Howdens fit)
*Note - Top brackets invert for
integrated ‘J’ pull frontals
26 27www.howdens.com
Built-Under Larder Fridge LAM6000 Instructions and Installation
Fasten plastic
brackets to
appliance
Secure to cabinet using pre-fitted
small side brackets
c.40mm
c.40mm
10
11
*Note - Use bracket LAM0060 if fitting a shaker frontal
to avoid frontal centre panel damage.
9
28 29www.howdens.com
Built-Under Larder Fridge LAM6000 Instructions and Installation
4. Problem solving
If the appliance does not operate when switched on, check:
• The plug is inserted properly in the socket and that the power supply
is on.
• If the fuse has blown/circuit breaker has tripped/main switch has
been turned o.
• The temperature control has been set correctly. (Checking these
items may avoid a charge if a guarantee service call is made).
Secure to cabinet
*Ensure plinth air vents are clear
12
c.40mm
Fix plastic cover trims
13
30 31www.howdens.com
Built-Under Larder Fridge LAM6000 Instructions and Installation
5. Guarantee
Your appliance has the benefit of a comprehensive manufacturer’s
guarantee which covers the cost of breakdown repairs.
(Details of which are shown on your Proof of Purchase Document)
• Any claim during the period of the guarantee
MUST BE ACCOMPANIED BY THE PROOF OF PURCHASE.
• The product must be correctly installed and operated in accordance
with the manufacturer’s instructions and used for normal domestic
purposes.
•This guarantee does not cover accidental damage, misuse or
alterations which are likely to aect the product.
• The guarantee is invalid if the product is tampered with, or repaired
by any unauthorised person. (The guarantee in no way aects your
statutory or legal rights).
What to do if you need to report a problem
Please ensure you have ready:
• The product’s model and serial numbers.
• Howdens Proof of Purchase Document.
•Your full contact details.
Call the Depot number on your Proof of Purchase
Document supplied with the product / kitchen. or
Call the Lamona Service Line on 0344 460 0006
• Product installed within a domestic kitchen or a non-domestic kitchen
where 8 or fewer people are using the appliance.
Where to find model
and serial number on
your machine.
Left hand side wall
Spare Parts availability - 7 Years (Door seals - 10 Years)
www.lamonaspares.co.uk
Product serial number
(Place sticker here)
ISSUE v1.1 100521
Howden Joinery Ltd, Thorpe Road, Howden, East Yorkshire, DN14 7PA
Imported in EU by: Houdan Cuisines SAS, Z.A. du Bois Rigault Nord
1 Rue Calmette, 62880 Vendin-le-Vieil, Cedex, France
Product information correct a t the time of publication in May2021, The
company has a policy of continuous product development and reserves the
right to change any products and specifications given in this manual.
Subject to the Terms and Conditions of Trading, a copy of the Howdens
Terms and Conditions is available upon request.
Copyright © 2021 Howden Joinery Ltd. All rights reserved.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17

AEG LAM6000 Owner's manual

AEG
Brand
AEG
Model
LAM6000
Type
Owner's manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents