Hardwood
Sealer
Water-based • No VOCs • Non-Toxic • Non Corrosive • 100% Biodegradable
Maintains the natural color of tropical
hardwoods for a longer time
Easy to apply
HAZARD WARNINGS:
- May irritate skin or eyes. May cause serious injury if ingested.
- Avoid contact with skin and eyes. Do not ingest.
- Keep out of reach of children.
- Use only in well ventilated areas.
- Keep container tightly closed.
- If swallowed, do not induce vomiting: seek medical advice
immediately and show this container or label.
- We take no responsibility for misusage.
- Important: keep frost free.
EMERGENCY FIRST AID:
- Eye contact: Wash eyes immediately with large amounts of
water. Get medical attention.
- Skin contact: Remove contaminated clothing immediately.
Wash affected areas with soap and large amounts of water.
Get medical attention.
- Inhalation: Immediately remove the affected person from the
exposure area to fresh air. Get medical attention if breathing
is difficult.
- Other: Provide physician with a copy of the MSDS, available at
1-800-706-5225.
- For chemical emergencies only call: 1-800-424-9300
CHEMICAL INGREDIENTS:
Proprietary chemicals, Butyldiglycolacetate, pigments, water
WHY IS IT SO MUCH BETTER THAN HARDWOOD-OIL:
1. It maintains the natural brown color of tropical hardwoods up
to 2 times longer than hardwood-oil.
2. It’s environment-friendly because it is 100% water-based;
no toxic fumes; non flammable.
3. It is fast and easy to apply.
4. It’s not an oil, it is not greasy: clothes stay clean.
5. It is resistant to mould and prevents black spots on the teak.
INSTRUCTIONS FOR USE:
1. Before using the HARDWOOD SEALER, eye protection and
rubber gloves should be worn. Cover the ground under your
work area before starting.
2. Gray teak or teak treated with teak-oil must first be cleaned
with TEAK CLEANER.
3. If cleaned wood feels rough, sand lightly before treating with
Protector. Make sure the teak is 100% dry and free of dust.
4. Shake and stir HARDWOOD SEALER at least a minute before
use. Insufficient shaking can lead to uneven weathering.
5. We suggest you try the HARDWOOD SEALER on a small area
first (e.g. the back of a leg) to judge if the color meets your
expectations.
6. Apply a very thin layer of HARDWOOD SEALER evenly over the
furniture with a dust free cloth. Apply a second very thin coat
after 30 minutes drying time.
7. It is recommended that you treat your furniture with
HARDWOOD SEALER at least once a year.
Distributed by ForestWorld LLC. For more product information please contact (866) 307-3464.