Sioux Chief 552-B22 User guide

552-B22
Sioux Chief
Brand
Sioux Chief
Model
552-B22
Type
User guide

This manual is also suitable for

Sioux Chief 552-B22 is a ½" CTS single offset hanger designed to protect, support, and reduce noise associated with CTS tubes. Its 1" offset from mounting surfaces shields tubes from sheetrock installers and potential punctures, preventing concealed leaks. The I-beam design ensures job site durability, while the locking finger securely holds tubes in place. Compatible with ½" or ¾" CTS tubes, it can be used for water supply, drainage, and support applications.

Sioux Chief 552-B22 is a ½" CTS single offset hanger designed to protect, support, and reduce noise associated with CTS tubes. Its 1" offset from mounting surfaces shields tubes from sheetrock installers and potential punctures, preventing concealed leaks. The I-beam design ensures job site durability, while the locking finger securely holds tubes in place. Compatible with ½" or ¾" CTS tubes, it can be used for water supply, drainage, and support applications.

Protect
Provides a minimum 1" offset from mounting surface,
protecting tube from sheetrock installers.
Strong
I-beam design on stem stands up to the demands of the
job site and the locking nger holds the tube securely in place.
Quiet
Reduces noise associated with expansion and contraction
of tube, and doesn’t allow the tube to come into contact
with the stud or joist.
Compatible
For use with ½" or ¾" CTS tube (copper, PEX, CPVC).
Offset CTS Hanger
Patent #7,896,296
Canadian Patent #2,637,128
www.siouxchief.com
Supply Drainage Support
www.siouxchief.com A.03/17
#LT3-TOTEM
Moving the tube away from the mounting surface reduces chances of other trades or homeowners penetrating water
supply lines causing potential leaks. Once PEX tubing has been penetrated with a nail or screw, it may take weeks
or months for rust to develop, concealing a leak behind the wall.
14940 Thunderbird Road
Kansas City, Missouri 64147
P 1.800.821.3944
F 1.800 . 758 .5950
Nails or screws can pierce the
tubing causing leaks behind
the wall.
Designed with a 1" offset from
the structure, placing the tube
away from the mounting surface.
The unique base fastens to any
at surface or on the engineered
wood joist ange.
Reduce costs by installing one
hanger for parallel tube runs.
1"
SolutionSolutionSolutionProblem
to 0F (-18C)
160F (71C)
continuous
U.V. resistant
HDPE
IMPACT
RESISTANCE
MATERIAL
NAIL
MAXIMUM
TEMPERATURE
Material Specications
1-5/8" or
2-1/2",
zinc-plated,
ring shank
CASE QTY
DESCRIPTIONITEM NO. MIN QTY
552-A2
552-A3
552-B22
552-B33
552-B23
552-C22
552-C33
552-C23
½" CTS
½" CTS x ½" CTS
½" CTS x ½" CTS
¾" CTS x ¾" CTS
¾" CTS x ¾" CTS
¾" CTS
½" CTS x ¾" CTS
½" CTS x ¾" CTS
50
50
50
50
50
50
50
50
500
500
500
500
500
500
500
500
Note:
Totem hangers are not
suspension hangers. Sioux Chief
does NOT recommend installing
upside down.
Ring-shank nails are provided
with all models, but are
not pre-installed
Buying Information
Single Offset
Twin Offset
Stacked Offset
  • Page 1 1
  • Page 2 2

Sioux Chief 552-B22 User guide

552-B22
Sioux Chief
Brand
Sioux Chief
Model
552-B22
Type
User guide
This manual is also suitable for

Sioux Chief 552-B22 is a ½" CTS single offset hanger designed to protect, support, and reduce noise associated with CTS tubes. Its 1" offset from mounting surfaces shields tubes from sheetrock installers and potential punctures, preventing concealed leaks. The I-beam design ensures job site durability, while the locking finger securely holds tubes in place. Compatible with ½" or ¾" CTS tubes, it can be used for water supply, drainage, and support applications.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI