88 5565 32
Bimini Jim
Round Dining Table
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
Home Styles Consumer Assistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
A.
Top
1 pc.
B.
Top
1 pc.
C.
Stretcher
1 pc.
D.
Leg
4 pcs.
E.
Cover
1 pc.
Key Wrench
1 pc. Head Cap Bolt
16 pcs. (+1 extra) Spring Washer
16 pcs. (+1 extra) Flat Washer
16pcs. (+1 extra)
Hardware List
Tools recommended for assembly : Level
Assembly Instructions
A
E
B
C
DD
D
D
STEP 2
STEP 3
STEP 4
Place Top (B) upside down on a soft cloth.
Attach the unit to Top (B) with Head Cap
Bolts, Spring Washers and Flat Washers.
Turn the table to its’ upright position.
Remove plastic fi lm from Top (A), then
place Top (A) onto the table with the
smooth side up.
Insert Cover (E) into the umbrella hole in
table top.
To level the table, adjust the
adjustable levelers on the
bottom of the legs.
(See Figure 1)
Head Cap Bolt
Spring Washer
Flat Washer
Head Cap Bolt
Spring Washer
Flat Washer
Plastic Film
Figure 1
IMPORTANT
* Do not tighten up all the bolts until each part is properly assembled.
* You should keep Hex Wrench in the safe place as you may need to tighten up
the Head Cap Bolts in the future.
* After assembly, item must be level to work property.
Use the included adjustable levelers to level.
STEP 1
Attach Legs (D) to Stretcher (C) with
Head Cap Bolts, Spring Washers and
Flat Washers.
-
1
-
2
Home Styles 5565-32 Operating instructions
- Type
- Operating instructions
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Home Styles 5170-31 Assembly Instructions
-
-
-
-
-
-
-
-
-
