OVERVIEW
• DEEP GROOVE CLEANING – Removes dirt & debris from the grooves of
your favourite records.
• ALL YOUR RECORDS – Cleans 7”, 10” and 12” vinyl records – we’ve got
you covered!
• KEEPS LABELS DRY – Does not wet or stain your record label during the
cleaning process.
• STYLUS FRIENDLY – Leaves records clean and dry. Does not leave sticky
residue on your stylus.
• CLEANING SOLUTION – Our proprietary cleaning
solution is quick-drying and single-use for best results.
CONTENTS
• 1 x Record washing sink
• 1 x Drying rack (holds 10 records)
• 2 x Super soft velvet cleaning brushes
• 2 x 150ml vinyl record cleaning fluid
• 2 x Microfibre drying cloths (1 Large and 1 Small)
• 2 x Brush rollers
• 1 x Instructions
1 x Record washing sink
1 x Drying rack
(holds 10 records)
2 x Super soft velvet
cleaning brushes
2 x Microfibre drying cloths
(1 Large and 1 Small)
2 x Brush rollers
2 x 150ml vinyl record cleaning
fluid (enough for 500 records)
RECORD CLEANING
MACHINE INSTRUCTIONS
CARE & MAINTENANCE
1. Once you have finished cleaning your batch of records, discard the used cleaning solution (do not re-use it).
2. Clean the sink, brush rollers and cleaning brushes with warm water and leave them to air dry.
3. Once dry put all supplies into the sink and attach the lid.
FREQUENTLY ASKED QUESTIONS (FAQS)
1. There is a fluffy build up on my stylus after cleaning my records?
To avoid any stylus build-up, please make sure you have washed your microfibre cloths before use,
without using fabric softener.
2. The drying rack is missing?
The drying rack can be found hidden underneath the record sink. You will need to pull it out to use it.
3. There are parts missing from my machine. Do I need to return it?
No. Please contact us if you have any missing parts, and we will be happy to assist you.
4. Does the machine come with a warranty?
Yes, we offer a 500 record cleaning guarantee. If your parts need replacing before you have cleaned 500
records, just contact us and we’ll replace them for free.
5. What type of water can I use with my machine?
Either distilled or deionised water. Most customers use deionised as it is generally cheaper and easier to
find than distilled.
SETUP
1. Unpack your SPINCARE® Record Cleaning Machine
from the box.
2. Important – Please wash the microfibre cleaning
cloths before use (do not use fabric softener).
3. Remove the lid and drying rack from underneath the
record sink.
4. Insert the brush rollers into the machine. There are 3
positions - 7”, 10” and 12”.
5. Fill the sink with distilled or deionised water (not tap
water), so the level is just underneath the brush rollers.
6. Add 4 capfuls of record cleaning fluid between the
cleaning brushes. This will clean 25-50 records.
CLEANING
1. Insert the first record you want to clean into the sink.
Slowly rotate the record CLOCKWISE 3 times.
2. Slowly rotate the record ANTI-CLOCKWISE 3 times.
3. Carefully remove the record from the washer without
touching the playing surface and place it into the
drying rack.
4. Any excess fluid will drop into the drying rack reservoir.
5. Wipe the record with the large microfibre cloth in a
CLOCKWISE motion.
6. Repeat with the small microfibre cloth to remove any
remaining debris (optional).
7. Once the record is completely dry, put it into an
archival quality SPINCARE® inner sleeve.
8. Repeat the process above for all the records you
want to clean.
/