BrushGrubber BG-10 User manual

Brand
BrushGrubber
Model
BG-10
Type
User manual

BrushGrubber BG-10 is a tree and post puller designed for outdoor use with skid loaders or tractors. Its primary function is to remove small trees and posts efficiently. The device features two sturdy blades that grip the object being removed, allowing the operator to leverage the power of the vehicle to extract it from the ground. The BG-10 is equipped with rotating shafts to facilitate the removal process. To ensure safety during operation, the user must secure the device to the vehicle's forks using the provided hex bolts and regularly check for any signs of damage or wear.

BrushGrubber BG-10 is a tree and post puller designed for outdoor use with skid loaders or tractors. Its primary function is to remove small trees and posts efficiently. The device features two sturdy blades that grip the object being removed, allowing the operator to leverage the power of the vehicle to extract it from the ground. The BG-10 is equipped with rotating shafts to facilitate the removal process. To ensure safety during operation, the user must secure the device to the vehicle's forks using the provided hex bolts and regularly check for any signs of damage or wear.

Important Safety Warnings and Instructions:
Operator must read and understand all safety precautions, warnings,
and instructions before using this product. This product ONLY to be
used by an Adult.
The Post/Tree Puller is designed for outdoor use only.
ALWAYS secure the Post/Tree Puller to forks by tightening Hex Bolts
(see instructions)
Before each use, ALWAYS check that forks are securely attached to
skid loader/tractor (refer to vehicle owner’s manual for specifics
regarding capacities and operation limits).
Check the Post/Tree Puller after each use for any signs of damage or
wear. DO NOT USE if damaged, repair before re-using.
ALWAYS keep any body part or limbs away from Post/Tree Puller blades or moving parts, while attaching
Post/Tree Puller and during operation.
Instructions:
1. Attach to operating vehicle forks and secure forks by tightening Hex Bolts.
2. Position the post/tree to be removed between the two blades positioning the Post/Tree Puller near the
bottom of the post/tree approximately 1 foot above the ground. If removing objects that are taller than 4
ft, cut off the post or tree first to avoid from falling on the operator or operating vehicle.
3. Using operating vehicle, now raise the forks to remove the post or small tree.
4. After the post or small tree is removed. Move to clear area and lower forks so removed post or tree rests
on the ground; Continue lowering forks, then blades will release by tilting upward. Next back away from
post/tree. CAUTION, be sure post/tree is in clear area not to damage any property, objects, people, pets
or operator.
5. Check for damage and that debris is all clear, then repeat step 1.
Note: See parts breakdown on back of page
TREE/POST PULLER Model #: BG-10
WARNING
BAC Industries, Inc. and Brush Grubber will not be held liable for any damages, losses, or injury, due to
misapplication or misuse of this product or for any other reason. Always wear approved safety glasses,
protective clothing, and proper hand and foot protection at all times. Keep all people and pets or animals
clear from brush removal work area.
WARNING
!
BrushGrubber.com
PO BOX 5064
HOPKINS, MN 55343
PH: 952-945-9058
www.brushgrubber.com
Email: [email protected]
See other unique items at BrushGrubber.com
FOR ANY QUESTIONS, PLEASE CONTACT OUR OFFICE OR VISIT WWW.BRUSHGRUBER.COM
Ref. #
Qty
Part #
Description
1
2
BG10-01
Flat Washer Ø36x Ø29x2
2
2
BG10-02
Roll Pin Ø4x35
3
2
BG10-03
Rotating Shaft Ø28x520
4
2
BG10-04
Hex Bolt M12x40
5
1
BG10-05
Main Body
6
1
BG10-06
Right Blade
7
1
BG10-07
Left Blade
WARNING
BAC Industries, Inc. and Brush Grubber will not be held liable for any damages, losses, or injury, due to
misapplication or misuse of this product or for any other reason. Always wear approved safety glasses,
protective clothing, and proper hand and foot protection at all times. Keep all people and pets or animals
clear from brush removal work area.
WARNING
!
BrushGrubber.com
PO BOX 5064
HOPKINS, MN 55343
PH: 952-945-9058
www.brushgrubber.com
Email: [email protected]
See other unique items at BrushGrubber.com
FOR ANY QUESTIONS, PLEASE CONTACT OUR OFFICE OR VISIT WWW.BRUSHGRUBER.COM
  • Page 1 1
  • Page 2 2

BrushGrubber BG-10 User manual

Brand
BrushGrubber
Model
BG-10
Type
User manual

BrushGrubber BG-10 is a tree and post puller designed for outdoor use with skid loaders or tractors. Its primary function is to remove small trees and posts efficiently. The device features two sturdy blades that grip the object being removed, allowing the operator to leverage the power of the vehicle to extract it from the ground. The BG-10 is equipped with rotating shafts to facilitate the removal process. To ensure safety during operation, the user must secure the device to the vehicle's forks using the provided hex bolts and regularly check for any signs of damage or wear.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents