Contec AO-1604VIN-USB Reference guide

Reference Manual

CONTENTS

N Series for USB

Isolated Analog Output Unit (±10V Voltage Output)

AO-1604VIN-USB

Isolated Analog Output Unit (0 - 20mA Current Output)

AO-1604AIN-USB

Introduction .................................................................. 5

Safety Precautions .................................................... 13

Setup ............................................................................. 20

Installation ................................................................... 36

Software ....................................................................... 56

Function ....................................................................... 64

Appendix ...................................................................... 78

Customer Support and Inquiry ........................... 86

— 2 —

Table of Contents

Introduction ....................................................................... 5

1. Related Manuals ......................................................................................................................................................6

2. About the Product ..................................................................................................................................................7

3. Features ......................................................................................................................................................................8

1. AO-1604VIN-USB .............................................................................................................................................8

2. AO-1604AIN-USB .............................................................................................................................................8

3. Common ..............................................................................................................................................................8

4. Product Configuration List ............................................................................................................................... 10

5. Support Software ................................................................................................................................................. 11

6. Optional Products ................................................................................................................................................ 12

Safety Precautions ........................................................... 13

1. Safety Information ............................................................................................................................................... 14

2. Handling Precautions ......................................................................................................................................... 15

1. Regarding “CE EMC Directive Class A Notice” ................................................................................... 16

2. FCC PART15 Subpart B Class A ................................................................................................................ 17

3. EN55032Class A Notice .............................................................................................................................. 17

3. Environment ........................................................................................................................................................... 18

4. Inspection ............................................................................................................................................................... 18

5. Storage ..................................................................................................................................................................... 19

6. Disposal ................................................................................................................................................................... 19

Setup ................................................................................. 20

1. What is Setup? ...................................................................................................................................................... 21

1. Driver Software Installation ....................................................................................................................... 21

2. Driver Software Installation ............................................................................................................................. 22

1. Starting Up the Install Program ............................................................................................................... 22

3. Hardware Setting ................................................................................................................................................. 23

1. Nomenclature of Product Components ............................................................................................... 23

2. LED Indicator ................................................................................................................................................... 24

3. Setting Switches............................................................................................................................................. 24

4. USB Port ............................................................................................................................................................ 24

5. Power Supply Connector ............................................................................................................................ 25

4. Hardware installation ......................................................................................................................................... 27

1. Connecting the external power supply by self-powered .............................................................. 27

2. Connecting the Product ............................................................................................................................. 29

5. Driver Software Initialization ........................................................................................................................... 30

1. Setting the device name ............................................................................................................................ 30

6. Operation Check .................................................................................................................................................. 32

1. Check Method ................................................................................................................................................ 32

2. Using the Diagnosis Program .................................................................................................................. 32

7. Setup Troubleshooting ...................................................................................................................................... 35

— 3 —

Table of Contents

1. Examples and Solution ................................................................................................................................ 35

Installation ........................................................................ 36

1. Installing the Product ......................................................................................................................................... 37

1. Installation Conditions ................................................................................................................................ 37

2. Mounting on/Removing from a DIN Rail ............................................................................................ 40

3. Desktop Installation ..................................................................................................................................... 42

4. Mounting on the Wall ................................................................................................................................. 42

5. Installation Using the Magnet.................................................................................................................. 43

2. Connecting to an External Device ................................................................................................................. 45

1. Connecting an Interface Connector ...................................................................................................... 45

2. Connecting Cable .......................................................................................................................................... 46

3. Signal Layout on the Interface Connector .......................................................................................... 47

3. Connecting Analog Output Signal (AO-1604VIN-USB) .................................................................... 48

1. Connection Example of Voltage Output .............................................................................................. 48

4. Connecting Analog Output Signal (AO-1604AIN-USB) .................................................................... 50

1. Connection Example of Current Output .............................................................................................. 50

5. Connecting Digital I/O Signals ....................................................................................................................... 53

1. Input Circuit ..................................................................................................................................................... 53

2. Example Connection with switch ............................................................................................................ 54

3. Output Circuit ................................................................................................................................................. 55

Software ............................................................................ 56

1. Analog I/O Driver for Windows...................................................................................................................... 57

1. Accessing the Help File ............................................................................................................................... 57

2. Using Sample Programs ............................................................................................................................. 57

3. Running a Sample Program ...................................................................................................................... 58

4. Distributing Developed Application ...................................................................................................... 58

5. Use of Utility Program ................................................................................................................................. 58

6. Uninstalling the Driver Software ............................................................................................................. 60

7. Returning to Initial State ............................................................................................................................ 61

2. CONTEC Device Utility ....................................................................................................................................... 62

1. Updating Firmware ....................................................................................................................................... 62

Function ............................................................................ 64

1. Analog Output Function ................................................................................................................................... 65

1. Setting the Conversion Conditions ........................................................................................................ 66

2. Starting/Stopping Operation .................................................................................................................... 74

3. Monitoring the Status and Acquiring Data ......................................................................................... 74

4. Reset ................................................................................................................................................................... 75

2. Digital Input Function ........................................................................................................................................ 76

3. Digital Output Function .................................................................................................................................... 77

— 4 —

Table of Contents

Appendix .......................................................................... 78

1. Hardware Specification ...................................................................................................................................... 79

2. Physical Dimensions ........................................................................................................................................... 82

1. Product .............................................................................................................................................................. 82

2. Physical dimensions of supplied AC adapter (POA201-10-2) ............................................. 82

3. Circuit Block Diagram ......................................................................................................................................... 83

4. Control Signal Timings ...................................................................................................................................... 84

1. Control Signal Timings for Analog Output ......................................................................................... 84

5. About Calibration ................................................................................................................................................ 85

Customer Support and Inquiry ...................................... 86

1. Services .................................................................................................................................................................... 87

— 5 —

Introduction

This section provides necessary information of the product

such as the outline, bundled items and manuals before

actual use.

—

Introduction

—

AO-1604VIN-USB / AO-1604AIN-USB Reference Manual

— 6 —

1. Related Manuals

The manuals related to the product are listed below.

Read them as necessary along with this document.

 Must Read the Followings.

Name

Purpose

Contents

How to get

Setup Guide

Must read this after

opening the package.

This lists the product

configuration and describes

the precautions.

Included in the package

(Printed matter)

Reference Manual

(This Document)

Read this when

operating the product.

This describes the hardware

aspects such as functions

and settings.

Download from

the Contec

website (PDF)

 Download Manuals

Download the manuals accordingly from the following URL.

Download

https://www.contec.com/download/

—

Introduction

—

AO-1604VIN-USB / AO-1604AIN-USB Reference Manual

— 7 —

2. About the Product

This product is an analog output unit supporting USB2.0 to provide the output function of analog

signal from USB port on the computer.

Compact design, (188.0(W)×78.0(D)×30.5(H)mm), features flexibility in installation. The product can

be set on the floor, wall, and inside the console or equipment with the DIN rail.

For AO-1604VIN-USB, 4 channels of 16-bit analog output, and digital input and output (4 channels

respectively) are equipped, and these circuits are isolated from the computer.

As the analog output supports differential input, accurate measurement can be performed even

when potential differences with the signal source occur.

The output range supports ±10V voltage output.

As for AO-1604AIN-USB, 4 channels of 16-bit analog output, and digital input and output (4 channels

respectively) are equipped, and these circuits are isolated from the computer.

The output range supports 0-20mA current output.

—

Introduction

—

AO-1604VIN-USB / AO-1604AIN-USB Reference Manual

— 8 —

3. Features

1. AO-1604VIN-USB

 4 channels of analog output (voltage output) with high

accuracy, and 4 channels of digital input and output

respectively are contained

Analog output (10μsec, 16bit, 4ch), digital input and output (Input: TTL level 4 channels, Output: Open-collector 4 channels)) are equipped.

The analog output supports the ±10V voltage output bipolar.

2. AO-1604AIN-USB

 4 channels of analog output (current output) with high

accuracy, and 4 channels of digital input and output

respectively are contained

Analog output (20μsec, 16bit, 8ch), digital input and output (Input: TTL level 4 channels, Output: Open-collector 4 channels)) are equipped.

The analog output supports the 0-20mA current output.

3. Common

 Buffer memory available in FIFO format

This product contains buffer memory (8K data) which can be used in FIFO format. You can perform analog output in the background,

independent of software and the current status of the PC.

 Sampling can be driven by a clock or by various triggers

Sampling can be started and stopped by software and external (timing of control signals input from external) triggers.

The sampling period can be controlled by the internal clock (high-precision timer included in the product).

 Isolated from the bus by a digital isolator

This product isolates the PC from analog output as well as digital I/O by a digital isolator, which improves the noise performance.

 Open collector output for digital output

The use of open collector output ensures digital outputting with TTL or 12-24 V power by the power of the external device.

 Compact design not restricting installation location

(188.0(W)×78.0(D)×30.5(H))

Compact design of 188.0(W) × 78.0(D) × 30.5(H) does not require special installation location.

—

Introduction

—

AO-1604VIN-USB / AO-1604AIN-USB Reference Manual

— 9 —

 Compatible to USB1.1/USB2.0

Compatible to USB1.1/USB2.0 and capable to achieve high speed transfer at High Speed (480 Mbps)

 Diverse installations such as screw fastening, magnet,

DIN rail are possible

Installation on the floor / wall /ceiling is possible by screw fastening, magnet, rubber feet, etc.

In addition, DIN rail mounting mechanism is equipped as standard with the product, making it easy to install the product within the panel

or the device.

 Easy-to-wire terminal connector adopted

Adoption of terminal connector (with screws) enables to achieve easy wiring.

 Windows compatible driver software is provided

Using the provided driver software API-AIO(WDM) for USB makes it possible to create applications of Windows.

In addition, a Diagnostic Program to confirm the hardware operations is supplied as well.

 LabVIEW is supported by a plug-in of dedicated library

Using the dedicated library allows a user to create each application for LabVIEW.

 Software-based calibration function

Calibration of analog output can be all performed by software. Apart from the adjustment information prepared before shipment,

additional adjustment information can be stored according to the use environment.

—

Introduction

—

AO-1604VIN-USB / AO-1604AIN-USB Reference Manual

— 10 —

4. Product Configuration List

The product consists of the items listed below.

Check, with the following list, that your package is complete.

If you discover damaged or missing items, contact your retailer.

Product…1

Setup Guide…1

Warranty Certificate…1

Serial Number Label…1

Interface Connector…2

USB Cable (1.8m)…1

USB Cable Attachment on

the main unit’s side (For

Mini B connector side)…1

Rubber feet…4

AC adapter…1

AC cable…1

—

Introduction

—

AO-1604VIN-USB / AO-1604AIN-USB Reference Manual

— 11 —

5. Support Software

You can use CONTEC support software according to your purpose and development environment.

For more details on the supported OS, applicable languages, or to download the latest version of

software, visit the CONTEC Web site.

Name

Contents

How to get

Driver software

API-AIO(WDM) for USB

The API-AIO(WDM) is the Windows version driver

software that provides products in the form of Win32

API functions (DLL). Various sample programs such

as Visual Basic and Visual C++, etc and diagnostic

program useful for checking operation is provided.

Download from the

CONTEC website

LabVIEW VI Library for Data

Acquisition

DAQfast for LabVIEW

This is a data collection library to use our devices in

the LabVIEW by National Instruments.

With Polymorphic VI, our design enables a LabVIEW

user to operate seamlessly.

Our aim is for the customers to perform easily,

promptly what they wish to do.

Download from the

CONTEC website

Download the files from the following URL.

Download

https://www.contec.com/download/

—

Introduction

—

AO-1604VIN-USB / AO-1604AIN-USB Reference Manual

— 12 —

6. Optional Products

Optional product items are as follows:

Use these items with the main unit as necessary.

Product Name

Model type

Description

AC adapter

POA201-10-2 *1

Input: 90 - 264VAC, Output: 12VDC 1.0A

DIN rail fitting power supply

CPS-PWD-90AW24-01 *2

90W (Input: 100-240VDC, Output: 12VDC 3.8A)

CPS-PWD-30AW24-01 *2

30W (Input: 100-240VDC, Output: 12VDC 1.3A)

CPS-PWD-15AW12-01 *2

15W (Input: 100-240VDC, Output: 12VDC 1.3A)

Magnet

CPS-MAG01-4

Magnet (Four Piece Set)

*1 The specification of the operating ambient temperature is 0 to 40 °C. It is the same adapter

included in this package.

*2 The specification of the operating ambient temperature is -20 to 70 °C.

Visit the CONTEC website for the latest optional products.

Website

https://www.contec.com/

— 13 —

Safety Precautions

Understand the following definitions and precautions to

use the product safely.

Never fail to read them before using the product.

—

Safety Precautions

—

AO-1604VIN-USB / AO-1604AIN-USB Reference Manual

— 14 —

1. Safety Information

This document provides safety information using the following symbols to prevent accidents

resulting in injury or death and the destruction of equipment and resources.

Understand the meanings of these labels to operate the equipment safely.

DANGER

indicates an imminently hazardous situation which, if not

avoided, will result in death or serious injury.

WARNING

WARNING indicates a potentially hazardous situation which, if not

avoided, could result in death or serious injury.

CAUTION

indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury or in property damage.

—

Safety Precautions

—

AO-1604VIN-USB / AO-1604AIN-USB Reference Manual

— 15 —

2. Handling Precautions

DANGER

 Do not use the product in locations exposed to a flammable or corrosive gas. It may cause

explosion, fire, electrical shock, or malfunction.

 Do not place the product in an unstable location or use incomplete mountings. Otherwise, it

may cause the device to fall.

CAUTION

 Do not strike or bend this product.

Otherwise, this product may malfunction, overheat, cause a failure or breakage.

 Do not touch this product's metal plated units (USB connector) with your hands.

Otherwise, the product may malfunction, overheat, or cause a failure. When you touch the

product, wipe it clean with industrial alcohol.

 Do not close the ventilation hole(s) of this product by, for example, placing an object.

This may cause overheating, malfunction, and/or failure of the product.

 Do not touch the external connector when the power is on. Otherwise this product may

malfunction, overheat, or cause a failure due to static electricity.

 Do not set or remove the power supply connector and interface connector when the power is

on. This may cause a failure.

 When the product is self-powered, do not plug or unplug the 12-24VDC power with the

product while the 12-24VDC is outputting the voltage. This may cause a failure.

 Do not operate switches when the power is on. This may cause a failure.

 When connecting multiple products, set one product at a time. Complete the setup before

starting to connect the next product.

 If you use this product in a noisy environment, connect the FG pin of the product to the

ground (earth) to stabilize the operation.

 The specifications of the product are subject to change without notice for enhancement and

quality improvement. Even when using the product continuously, be sure to read the manual

in the CONTEC's website and understand the contents.

 Do not modify the product. CONTEC will bear no responsibility for any problems, etc.,

resulting from modifying the product.

 Regardless of the foregoing statements, CONTEC is not liable for any damages whatsoever

(Including damages for loss of business profits) arising out of the use or inability to use this

CONTEC product or the information contained herein.

—

Safety Precautions

—

AO-1604VIN-USB / AO-1604AIN-USB Reference Manual

— 16 —

1. Regarding “CE EMC Directive Class A Notice”

The ferrite core must be installed on the AC adapter so that this product may suit the above-

mentioned standard.

See below for the type of the ferrite core. (Equivalent product can also be used).

Name

Maker

Turn

Quantity

Installation Site

E04SR301334

SEIWA

2

1

On DC cable and FG cable at the product side

Image diagram

—

Safety Precautions

—

AO-1604VIN-USB / AO-1604AIN-USB Reference Manual

— 17 —

2. FCC PART15 Subpart B Class A

NOTE

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own

expense.

FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

3. EN55032Class A Notice

Warning:

Operation of this equipment in a residential environment could cause radio interference.

—

Safety Precautions

—

AO-1604VIN-USB / AO-1604AIN-USB Reference Manual

— 18 —

3. Environment

Use this product in the following environment. If used in an unauthorized environment, this product may overheat,

malfunction, or cause a failure.

Operating temperature

-20 - 60ºC

Humidity

10 - 90%RH (No condensation)

Corrosive gases

None

Floating dust particles

Not to be excessive

4. Inspection

Inspect the product periodically as follows to use it safely.

CAUTION

Check that the ventilation slit has no obstruction and has no dust or foreign matter adhering.

Moreover, if there is the slit on the case side, please confirm it to the slit similarly.

—

Safety Precautions

—

AO-1604VIN-USB / AO-1604AIN-USB Reference Manual

— 19 —

5. Storage

When storing this product, keep it in its original packing form.

 Put this product in the storage bag.

 Wrap it in the packing material, and then put it in the box.

 Store the package at room temperature at a place free from direct sunlight, moisture, shock,

vibration, magnetism, and static electricity.

6. Disposal

When disposing of the product, follow the disposal procedures stipulated under the relevant laws

and municipal ordinances.

— 20 —

Setup

This section explains how to set up this product.

Page is loading ...

Contec AO-1604VIN-USB Reference guide

This manual is also suitable for

Contec AO-1604VIN-USB Reference guide

Related papers

Other documents