Contec FAN0925 is a replacement fan for FA-PAC(PC) series devices. It comes with a conversion cable and a user manual. To install the fan, first remove the power cord and cover of the chassis. Then, remove the screws that hold the old fan in place and disconnect the power cable. Remove the fan filter with a minus screwdriver. Finally, install the new fan and reconnect the power cable.
Contec FAN0925 is a replacement fan for FA-PAC(PC) series devices. It comes with a conversion cable and a user manual. To install the fan, first remove the power cord and cover of the chassis. Then, remove the screws that hold the old fan in place and disconnect the power cable. Remove the fan filter with a minus screwdriver. Finally, install the new fan and reconnect the power cable.
-
1
-
2
-
3
-
4
Contec FAN0925 is a replacement fan for FA-PAC(PC) series devices. It comes with a conversion cable and a user manual. To install the fan, first remove the power cord and cover of the chassis. Then, remove the screws that hold the old fan in place and disconnect the power cable. Remove the fan filter with a minus screwdriver. Finally, install the new fan and reconnect the power cable.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- Nederlands: Contec FAN0925 de handleiding
Related papers
-
Contec POW150X Owner's manual
-
-
-
Contec POW250X Owner's manual
-
-
-
-
-
-
Other documents
-
Goldstar MA2130W Owner's manual
-
Cisco Systems 2000 User manual
-
Cisco Nexus 2248PQ Installation guide
-
Panasonic Microwave Oven NE-1056C User manual
-
Miller Spectrum 1250 Owner's manual
-
IBM System x3650 M3 4255 Installation and User Manual
-
-
Kollmorgen AKI-CDC-MOD-12T Installation guide
-
ESAB Plasmarc PCM-250 Plasma Arc Cutting Outfits Troubleshooting instruction
-