Belle Foret BFNBBS2ORB Installation guide

Type
Installation guide
R218
WESTBRASS 2429 E. Olympic Blvd., Los Angeles, CA 90021
(213)-627-8441 (213) 627-2844 or[email protected] www.westbrass.com
INSTRUCTIONS:
1. Thoroughly clean around opening in sink.
2. Apply silicone around drain opening, approximately 1/2”
from edge of opening.
3. Remove nuts and washers and place bar strainer body
through opening.
4. From the underside of the sink place rubber washer over
large threads. Then screw large metal nut tightly against the
washers.
5. Complete the installation by further tightening large nut
with nut wrench.
6. Remove excess silicone with soft cloth.
INSTRUCCIONES:
1. Limpiar bien alrededor de la abertura del lavabo.
2. Aplicar silicona alrededor de la abertura del desagüe, aproximadamente a 1/2” del borde.
3. Retire tuercas y arandelas y colocar el cuerpo del cladero en la abertura.
4. Desde abajo del lavabo pasar la arandela de goma la rosca grande. Enroscar y ajustar
5. Por último ajustar la arandela grande con una llave inglesa.
6. Limpiar el exceso de pasta con un paño.
D218 Installation Instructions
  • Page 1 1

Belle Foret BFNBBS2ORB Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages