GMC Yukon-Yukon XL 2005 Owner's manual

Seats and Restraint Systems

........................... 1-1

Front Seats

............................................... 1-3

Rear Seats

............................................... 1-8

Safety Belts

............................................. 1-22

Child Restraints

....................................... 1-43

Airbag System

......................................... 1-66

Restraint System Check

............................ 1-81

Features and Controls

..................................... 2-1

Keys

........................................................ 2-3

Doors and Locks

....................................... 2-8

Windows

................................................. 2-14

Theft-Deterrent Systems

............................ 2-17

Starting and Operating Your Vehicle

........... 2-19

Mirrors

.................................................... 2-41

OnStar

®

System

...................................... 2-50

HomeLink

®

Wireless Control System

........... 2-52

Storage Areas

......................................... 2-56

Sunroof

.................................................. 2-60

Vehicle Personalization

............................. 2-61

Instrument Panel

............................................. 3-1

Instrument Panel Overview

.......................... 3-4

Climate Controls

...................................... 3-21

Warning Lights, Gages, and Indicators

........ 3-36

Driver Information Center (DIC)

.................. 3-54

Audio System(s)

....................................... 3-74

Driving Your Vehicle

....................................... 4-1

Your Driving, the Road, and Your Vehicle

..... 4-2

Towing

................................................... 4-62

Service and Appearance Care

.......................... 5-1

Service

..................................................... 5-3

Fuel

......................................................... 5-5

Checking Things Under the Hood

............... 5-10

All-Wheel Drive

........................................ 5-45

Rear Axle

............................................... 5-46

Four-Wheel Drive

..................................... 5-47

Front Axle

............................................... 5-48

Bulb Replacement

.................................... 5-49

Windshield Wiper Blade Replacement

......... 5-56

Tires

...................................................... 5-57

Appearance Care

..................................... 5-95

Vehicle Identiﬁcation

............................... 5-104

Electrical System

.................................... 5-105

Capacities and Speciﬁcations

................... 5-114

Maintenance Schedule

..................................... 6-1

Maintenance Schedule

................................ 6-2

Customer Assistance and Information

.............. 7-1

Customer Assistance and Information

........... 7-2

Reporting Safety Defects

........................... 7-10

Index

.................................................................1

2005 GMC Yukon/Yukon XL Owner Manual M

GENERAL MOTORS, GM, the GM Emblem, GMC, the

GMC Truck Emblem, and the name YUKON are

registered trademarks of General Motors Corporation.

This manual includes the latest information at the time it

was printed. We reserve the right to make changes

after that time without further notice. For vehicles ﬁrst

sold in Canada, substitute the name “General Motors of

Canada Limited” for GMC whenever it appears in this

manual.

Keep this manual in the vehicle, so it will be there if it is

needed while you are on the road. If the vehicle is

sold, leave this manual in the vehicle.

Canadian Owners

A French language copy of this manual can be obtained

from your dealer or from:

Helm, Incorporated

P.O. Box 07130

Detroit, MI 48207

How to Use This Manual

Many people read the owner manual from beginning to

end when they ﬁrst receive their new vehicle. If this

is done, it can help you learn about the features

and controls for the vehicle. Pictures and words work

together in the owner manual to explain things.

Index

A good place to quickly locate information about the

vehicle is the Index in the back of the manual. It is an

alphabetical list of what is in the manual and the

page number where it can be found.

Litho in U.S.A.

Part No. 05YUKON B First Edition

©

ii

Safety Warnings and Symbols

There are a number of safety cautions in this book. We

use a box and the word CAUTION to tell about things

that could hurt you if you were to ignore the warning.

{CAUTION:

These mean there is something that could hurt

you or other people.

In the caution area, we tell you what the hazard is.

Then we tell you what to do to help avoid or reduce the

hazard. Please read these cautions. If you do not,

you or others could be hurt.

You will also ﬁnd a circle

with a slash through it in

this book. This safety

symbol means “Do Not,”

“Do Not do this” or “Do Not

let this happen.”

iii

Vehicle Damage Warnings

Also, in this manual you will ﬁnd these notices:

Notice: These mean there is something that could

damage your vehicle.

A notice tells about something that can damage the

vehicle. Many times, this damage would not be covered

by your vehicle’s warranty, and it could be costly. But

the notice will tell what to do to help avoid the damage.

When you read other manuals, you might see

CAUTION and NOTICE warnings in different colors or in

different words.

There are also warning labels on the vehicle. They use

the same words, CAUTION or NOTICE.

Vehicle Symbols

The vehicle has components and labels that use

symbols instead of text. Symbols are shown along with

the text describing the operation or information

relating to a speciﬁc component, control, message,

gage, or indicator.

If you need help ﬁguring out a speciﬁc name of a

component, gage, or indicator, reference the following

topics:

• Seats and Restraint Systems in Section 1

• Features and Controls in Section 2

• Instrument Panel Overview in Section 3

• Climate Controls in Section 3

• Warning Lights, Gages, and Indicators in Section 3

• Audio System(s) in Section 3

• Engine Compartment Overview in Section 5

iv

These are some examples of symbols that may be found on the vehicle:

v

✍ NOTES

vi

Front Seats ......................................................1-3

Manual Seats ................................................1-3

Power Seats ..................................................1-4

Power Lumbar ...............................................1-5

Heated Seats .................................................1-5

Reclining Seatbacks ........................................1-6

Head Restraints .............................................1-7

Rear Seats .......................................................1-8

Rear Seat Operation .......................................1-8

60/40 Split Bench Seat ...................................1-8

50/50 Split Bench Seat ..................................1-11

Bench Seat ..................................................1-15

Bucket Seats ...............................................1-19

Safety Belts ...................................................1-22

Safety Belts: They Are for Everyone ................1-22

Questions and Answers About Safety Belts ......1-26

How to Wear Safety Belts Properly .................1-27

Driver Position ..............................................1-28

Safety Belt Use During Pregnancy ..................1-35

Right Front Passenger Position .......................1-36

Center Passenger Position .............................1-36

Rear Seat Passengers ..................................1-37

Rear Safety Belt Comfort Guides for Children

and Small Adults .......................................1-40

Safety Belt Extender .....................................1-42

Child Restraints .............................................1-43

Older Children ..............................................1-43

Infants and Young Children ............................1-45

Child Restraint Systems .................................1-49

Where to Put the Restraint .............................1-52

Top Strap ....................................................1-53

Top Strap Anchor Location .............................1-54

Lower Anchorages and Top Tethers for

Children (LATCH System) ...........................1-56

Securing a Child Restraint Designed for the

LATCH System .........................................1-58

Securing a Child Restraint in a Rear Outside

Seat Position ............................................1-59

Securing a Child Restraint in a Center Rear

Seat Position ............................................1-61

Securing a Child Restraint in the Center Front

Seat Position ............................................1-62

Securing a Child Restraint in the Right Front

Seat Position ............................................1-63

Section 1 Seats and Restraint Systems

1-1

Airbag System ...............................................1-66

Where Are the Airbags? ................................1-69

When Should an Airbag Inﬂate? .....................1-71

What Makes an Airbag Inﬂate? .......................1-73

How Does an Airbag Restrain? .......................1-73

What Will You See After an Airbag Inﬂates? .....1-74

Passenger Sensing System ............................1-75

Servicing Your Airbag-Equipped Vehicle ...........1-80

Adding Equipment to Your Airbag-Equipped

Vehicle ....................................................1-80

Restraint System Check ..................................1-81

Checking the Restraint Systems ......................1-81

Replacing Restraint System Parts

After a Crash ............................................1-82

Section 1 Seats and Restraint Systems

1-2

Front Seats

Manual Seats

{CAUTION:

You can lose control of the vehicle if you try to

adjust a manual driver’s seat while the vehicle

is moving. The sudden movement could startle

and confuse you, or make you push a pedal

when you do not want to. Adjust the driver’s

seat only when the vehicle is not moving.

If your vehicle has a manual bucket or a split bench

seat, you can adjust it with this lever located at the front

of the seat.

Lift the lever to unlock the seat. Using your body, slide

the seat to where you want it and release the lever.

Try to move the seat with your body to make sure the

seat is locked into place.

1-3

Power Seats

If your vehicle has a power seat, you can adjust it with

these controls located on the outboard sides of the seats.

• Raise or lower the front of the seat cushion by raising

or lowering the forward edge of the horizontal control.

• Move the seat forward or rearward by moving the

whole horizontal control forward or rearward.

• Raise or lower the rear of the seat cushion by raising

or lowering the rear edge of the horizontal control.

• Moving the whole horizontal control up or down

raises or lowers the entire seat cushion.

If your vehicle has power reclining seats, you can use

the vertical control to adjust the angle of the seatback.

Move the reclining front seatback rearward or forward

by moving the control toward the rear or the front of the

vehicle. See Reclining Seatbacks on page 1-6.

1-4

Power Lumbar

Your vehicle’s seats may be equipped with power lumbar.

You can increase or

decrease lumbar support

in an area of the lower

seatback with this control,

located on the outboard

sides of the front seat(s).

To increase support, press and hold the front of the

control. To decrease support, press and hold the rear of

the control. Let go of the control when the lower

seatback reaches the desired level of support.

You can also reshape the side wing area of the lower

seatback for more lateral support.

To increase support, press and hold the top of the

control. To decrease support, press and hold the bottom

of the control. Let go of the control when the lower

seatback reaches the desired level of support.

Your vehicle may have a memory function which allows

seat settings to be saved and recalled. See Memory

Seat on page 2-61 for more information.

Heated Seats

If your vehicle has this

feature, the button used to

control the driver’s

heated seat is located on

the driver’s door panel.

The button used to control

the passenger’s heated

seat is located on the

passenger’s door panel.

To heat the entire seat, press the horizontal button.

Press the button to cycle through the temperature

settings of high, medium, and low. The indicator light

will glow to indicate the level of heat selected.

To heat only the seatback, press the vertical button with

the heated seatback symbol. An indicator light on the

button will glow to designate that only the seatback

is being heated.

The engine must be running for them to operate.

The heated front seats will be canceled after the ignition

is turned off. If you still want to use the heated front

seat feature after you restart your vehicle, you will need

to press the heated seat button again.

1-5

Reclining Seatbacks

To adjust the front seatback, lift the manual lever

located on the outboard side of the seat. Release the

lever to lock the seatback where you want it. Lift

the lever again without pushing on the seatback and the

seatback will go to an upright position.

If your vehicle has power seats with a power recliner,

see Power Seats on page 1-4 for further information on

how to operate the reclining seatback feature.

But don’t have a seatback reclined if your vehicle is

moving.

1-6

{CAUTION:

Sitting in a reclined position when your vehicle

is in motion can be dangerous. Even if you

buckle up, your safety belts cannot do their

job when you are reclined like this.

The shoulder belt cannot do its job. In a crash,

you could go into it, receiving neck or other

injuries.

The lap belt cannot do its job either. In a crash

the belt could go up over your abdomen. The

belt forces would be there, not at your pelvic

bones. This could cause serious internal

injuries.

For proper protection when the vehicle is in

motion, have the seatback upright. Then sit

well back in the seat and wear your safety belt

properly.

Head Restraints

Adjust your head restraint so that the top of the restraint

is closest to the top of your head. This position

reduces the chance of a neck injury in a crash.

To raise the head restraint pull up on the head restraint.

Your vehicle may have rear seat head restraints that

can be adjusted up and down.

1-7

Rear Seats

Rear Seat Operation

Entering or Exiting the Third Row

Seats

{CAUTION:

If the seatback is not locked, it could move

forward in a sudden stop or crash. That could

cause injury to the person sitting there. Always

press rearward on the seatback to be sure it is

locked.

Extended models: The passenger’s side of the second

row 60/40 or rear bucket seats has an easy entry

feature. This makes it easy to get in and out of the third

seat, if your vehicle has one.

To operate the easy entry seat turn the release lever,

located on the back of the seat upward.

Tilt the seatback toward the front of the vehicle by

pulling the top of the seat forward. When you do the seat

bottom will release. Pull the seat forward until it stops.

Be sure to return the seat to the passenger position

when ﬁnished. Push and pull on the seat to make sure

it is locked in place.

60/40 Split Bench Seat

Yukon models: The rear seat may have a 60/40 split

seat which may be folded down to give you more

cargo space.

Extended models: The second row rear seat of

extended models may have a 60/40 split seat. Either

side of the rear seat my be folded down to provide more

cargo space.

1-8

Folding the Seatbacks

{CAUTION:

If the seatback is not locked, it could move

forward in a sudden stop or crash. That could

cause injury to the person sitting there. Always

press rearward on the seatback to be sure it is

locked.

Make sure that the area under or in front of the seat is

clear and that the head restraints are completely lowered.

On Yukon models, the rear seatbacks may be equipped

with rearward folding head restraints. When the

seatback is being folded down, the head restraint will

automatically fold rearward to allow a ﬂat load ﬂoor

for cargo or entry to the third row seat, if equipped.

1. Pull up on the strap

loop at the rear of the

seat cushion. Then,

pull the seat cushion up

and fold it forward.

2. Pull the seatback forward and fold the seatback

down until it is ﬂat.

If the seatback cannot fold ﬂat because it interferes with

the cushion, try moving the front seat forward and/or

bring the front seatback more upright. On the passenger

side of the extended models, the lever at the base of the

seat must be turned rearward to release the seatback.

1-9

To create a load ﬂoor release the panels from the

seatback by pushing forward on the latch. Then fold the

panels back to cover the rear seat footwell area.

To return the seat to the passenger position on a

extended model, do the following:

1. Lift the ﬂoor load panels and latch them into the

seatback.

2. Lift the seatback up and push rearward all the way.

3. Lower the seat cushion until it latches into position.

4. Pull forward on the seatback and up on the seat

cushion to make sure the seat is securely in place.

Make sure that the buckles on the driver’s side seatback

are accessible to the outboard and center occupant

and are not under the seat cushions.

On regular models, make sure the head restraints are

returned to the upright position.

1-10

50/50 Split Bench Seat

If your vehicle has a 50/50 split bench, the seatback(s)

can be folded and the entire seat(s) tilted or removed

from the vehicles.

Folding the Seatbacks

{CAUTION:

If the seatback is not locked, it could move

forward in a sudden stop or crash. That could

cause injury to the person sitting there. Always

press rearward on the seatback to be sure it is

locked.

To fold the seatbacks do the following:

• Pull up on the release lever, labeled 1, located on

the rear of the seatback, and push the seatback

forward.

• To return the seat to the passenger position, pull up

on the release lever labeled 1 and then pull up on

the seatback until the seatback locks into the upright

position.

Push forward on the seatback to make sure it is locked

into position.

1-11

Tilting the 50/50 Split Bench Seat

{CAUTION:

If the seatback is not locked, it could move

forward in a sudden stop or crash. That could

cause injury to the person sitting there. Always

press rearward on the seatback to be sure it is

locked.

{CAUTION:

If the support rod is not properly engaged, the

folded third row seat could come loose in a

sudden stop or crash. That could cause injury

to people and damage to your vehicle. Always

be sure the support rod is properly engaged

when the third row seat is folded forward.

Once the third seatback has been folded down, the

entire seat can be tilted forward to create a ﬂat

load ﬂoor. To do this, do the following:

1. Enter the rear cargo area of the vehicle.

2. Make sure the head restraints have been lowered

completely.

3. With the seat folded, unlatch the seat from the ﬂoor

by pulling up on the lever located under the

carrying handle at the rear of the seat labeled 2.

4. Lift the rear of the seat up, off the ﬂoor. You will not

be able to unlatch the seat from the ﬂoor unless the

seatback is folded down.

5. Tilt the seat fully forward and secure it in place

using the support rod located on the underside

of the seat on the passenger’s side. Make sure the

rod pin is fully engaged in the lock.

6. Push and pull on the seat. Make sure the support

rod is holding it ﬁrmly in place. Use the seat in this

position only when necessary for additional

cargo space.

To return the seat to the seating position do the

following:

1. Push forward on the seat and release the support

lock rod.

2. Secure the support rod in its stored position on the

underside of the seat.

1-12

3. Lower the seat to the ﬂoor and let the seat drop

into place.

4. Lift up on the carrying handle to make sure the seat

is locked in place.

5. Return the seatback to the upright position by

pulling up on the release lever labeled 1 before

the back can be folded upright.

6. Pull the seatback forward to make sure it is locked

in place.

Removing the 50/50 Split Bench Seat

To remove the 50/50 split bench seat, do the following:

1. Open the rear doors and enter the rear of the

vehicle.

2. Fold the seatback

forward onto the seat

cushion by using

the lever labeled 1.

The seat cannot

be removed unless the

seatback is folded.

3. To unlatch the seat

from the ﬂoor, pull up

on the release lever

labeled 2, located at the

rear of the seat, and lift

the rear of the seat up

off the ﬂoor.

4. Squeeze the release lever, located in the lower

middle to unlatch the seat from the ﬂoor, while

pulling the seat out.

5. While holding the rear of the seat up, roll the seat

out of the vehicle.

1-13

Replacing the 50/50 Split Bench Seat

{CAUTION:

If the seatback is not locked, it could move

forward in a sudden stop or crash. That could

cause injury to the person sitting there. Always

press rearward on the seatback to be sure it is

locked.

{CAUTION:

A seat that is not locked into place properly

can move around in a collision or sudden stop.

People in the vehicle could be injured. Be sure

to lock the seat into place properly when

installing it.

{CAUTION:

A safety belt that is improperly routed, not

properly attached, or twisted will not provide

the protection needed in a crash. The person

wearing the belt could be seriously injured.

After raising the rear seatback, always check

to be sure that the safety belts are properly

routed and attached, and are not twisted.

To reinstall the 50/50 split bench, do the following:

1. While holding the rear of the seat up, slide the front

wheels into the slots on the ﬂoor. The front latches

should lock into place. If the latches do not lock,

try tilting the rear of the seats upwards.

2. Once the latches are engaged, let the seat drop

into place. Release the lever labeled 1 to return

the seat to its upright position.

3. Push and pull on the seat to make sure it is locked

into place. The seatback cannot be raised to the

upright position unless the seat is secured to the

ﬂoor.

1-14

Page is loading ...

GMC Yukon-Yukon XL 2005 Owner's manual

This manual is also suitable for

GMC Yukon-Yukon XL 2005 Owner's manual

Related papers

Other documents