Cadillac 2011 CTS-V, 2007 CTS, 2007 CTS-V, 2011 CTS COUPE, CTS-V 2007 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Cadillac 2011 CTS-V Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Seats and Restraint Systems
........................ 7
Front Seats
.............................................. 8
Rear Seats
............................................. 18
Safety Belts
............................................ 20
Child Restraints
...................................... 42
Airbag System
........................................ 68
Restraint System Check
......................... 86
Features and Controls
................................. 89
Keys
....................................................... 91
Doors and Locks
.................................... 96
Windows
............................................... 103
Theft-Deterrent Systems
....................... 107
Starting and Operating Your Vehicle
..... 111
Mirrors
.................................................. 132
OnStar
®
System
................................... 137
Universal Home Remote System
.......... 139
Storage Areas
...................................... 151
Sunroof
................................................ 153
Instrument Panel
........................................ 155
Instrument Panel Overview
................... 158
Climate Controls
................................... 180
Warning Lights, Gages, and Indicators
.... 188
Message Center
................................... 209
Driver Information Center (DIC)
............ 218
Audio System(s)
................................... 258
Driving Your Vehicle
.................................. 287
Your Driving, the Road, and
Your Vehicle
...................................... 288
Towing
................................................. 326
Service and Appearance Care
................... 329
Service
................................................. 332
Fuel
...................................................... 334
Checking Things Under the Hood
......... 340
Rear Axle
............................................. 383
Headlamp Aiming
................................. 384
Bulb Replacement
................................ 387
2007 Cadillac CTS/CTS-V Owner Manual M
1
Windshield Wiper Blade Replacement
.... 390
Tires
..................................................... 392
Appearance Care
.................................. 435
Vehicle Identification
............................. 445
Electrical System
.................................. 446
Capacities and Specifications
................ 457
Maintenance Schedule
............................... 459
Maintenance Schedule
.......................... 460
Customer Assistance Information
............. 481
Customer Assistance and Information
..... 482
Reporting Safety Defects
...................... 500
Index
........................................................... 503
2
GENERAL MOTORS, GM, the GM Emblem,
CADILLAC, the CADILLAC Crest & Wreath,
and the name CTS are registered trademarks
of General Motors Corporation.
This manual includes the latest information at
the time it was printed. We reserve the right
to make changes after that time without notice.
For vehicles first sold in Canada, substitute
the name “General Motors of Canada Limited”
for Cadillac Motor Car Division whenever it
appears in this manual.
This manual describes features that may be
available in this model, but your vehicle may not
be equipped with all of them. For example,
more than one entertainment system may be
offered or your vehicle may have been ordered
without a front passenger or rear seats.
Keep this manual in the vehicle, so it will be there
if it is needed while you are on the road. If the
vehicle is sold, leave this manual in the vehicle.
Canadian Owners
A French language copy of this manual can be
obtained from your dealer or from:
Helm, Incorporated
P.O. Box 07130
Detroit, MI 48207
Litho in U.S.A.
Part No. 15864562 A First Printing
©
2006 General Motors Corporation. All Rights Reserved.
3
How to Use This Manual
Many people read the owner manual from
beginning to end when they first receive their
new vehicle. If this is done, it can help you learn
about the features and controls for the vehicle.
Pictures and words work together in the owner
manual to explain things.
Index
A good place to quickly locate information about
the vehicle is the Index in the back of the manual.
It is an alphabetical list of what is in the manual
and the page number where it can be found.
Safety Warnings and Symbols
There are a number of safety cautions in this
book. We use a box and the word CAUTION to
tell about things that could hurt you if you were
to ignore the warning.
{CAUTION:
These mean there is something that could
hurt you or other people.
In the caution area, we tell you what the hazard
is. Then we tell you what to do to help avoid
or reduce the hazard. Please read these cautions.
If you do not, you or others could be hurt.
You will also find a
circle with a slash
through it in this book.
This safety symbol
means “Do Not,”
“Do Not do this” or
“Do Not let this happen.”
4
Vehicle Damage Warnings
Also, in this manual you will find these notices:
Notice: These mean there is something
that could damage your vehicle.
A notice tells about something that can damage
the vehicle. Many times, this damage would not be
covered by your vehicle’s warranty, and it could
be costly. But the notice will tell what to do to help
avoid the damage.
When you read other manuals, you might see
CAUTION and NOTICE warnings in different colors
or in different words.
There are also warning labels on the vehicle. They
use the same words, CAUTION or NOTICE.
Vehicle Symbols
The vehicle has components and labels that use
symbols instead of text. Symbols are shown
along with the text describing the operation or
information relating to a specific component,
control, message, gage, or indicator.
If you need help figuring out a specific name of
a component, gage, or indicator, reference
the following topics:
Seats and Restraint Systems in Section 1
Features and Controls in Section 2
Instrument Panel Overview in Section 3
Climate Controls in Section 3
Warning Lights, Gages, and Indicators in
Section 3
Audio System(s) in Section 3
Engine Compartment Overview in Section 5
5
These are some examples of symbols that may be found on the vehicle:
6
Front Seats ..................................................... 8
Manual Seats ................................................ 8
Power Seats ................................................. 9
Power Lumbar ............................................. 10
Heated Seats .............................................. 10
Memory Seat and Mirrors ............................ 11
Reclining Seatbacks .................................... 14
Head Restraints .......................................... 17
Rear Seats .................................................... 18
Split Folding Rear Seat ............................... 18
Safety Belts .................................................. 20
Safety Belts: They Are for Everyone ........... 20
Questions and Answers About Safety Belts .... 25
How to Wear Safety Belts Properly ............. 26
Driver Position ............................................. 26
Safety Belt Use During Pregnancy .............. 33
Right Front Passenger Position ................... 34
Rear Seat Passengers ................................ 34
Rear Safety Belt Comfort Guides ................ 38
Safety Belt Pretensioners ............................ 41
Safety Belt Extender ................................... 41
Child Restraints ............................................ 42
Older Children ............................................. 42
Infants and Young Children ......................... 45
Child Restraint Systems .............................. 49
Where to Put the Restraint .......................... 54
Lower Anchors and Tethers for
Children (LATCH) .................................... 55
Securing a Child Restraint in a
Rear Seat Position ................................... 61
Securing a Child Restraint in the Right
Front Seat Position .................................. 63
Airbag System .............................................. 68
Where Are the Airbags? .............................. 71
When Should an Airbag Inflate? .................. 75
What Makes an Airbag Inflate? ................... 76
How Does an Airbag Restrain? ................... 76
What Will You See After an Airbag
Inflates? ................................................... 77
Passenger Sensing System ......................... 79
Servicing Your Airbag-Equipped Vehicle ...... 84
Adding Equipment to Your
Airbag-Equipped Vehicle .......................... 85
Restraint System Check ............................... 86
Checking the Restraint Systems .................. 86
Replacing Restraint System Parts
After a Crash ........................................... 87
Section 1 Seats and Restraint Systems
7
Front Seats
Manual Seats
{CAUTION:
If the seatback is not locked, it could
move forward in a sudden stop or crash.
That could cause injury to the person
sitting there. Always push and pull on the
seatback to be sure it is locked.
Your vehicle may have manual seats. To adjust
the seat, lift the bar under the front of the
seat to unlock it. Slide the seat to where you want
it and release the bar. Try to move the seat
back and forth with your body to be sure the seat
is locked in place.
8
Power Seats
If the vehicle has power seats, the controls used
to operate them are located on the outboard
side of the seats.
Move the seat forward or rearward by sliding
the horizontal control forward or rearward.
Raise or lower the front part of the seat
cushion by moving the front of the horizontal
control up or down.
Raise or lower the rear part of the seat
cushion by moving the rear of the horizontal
control up or down.
Raise or lower the entire seat by moving the
entire horizontal control up or down.
The vertical control is used for reclining your
seatback. See “Power Reclining Seatbacks” under
Reclining Seatbacks on page 14 for more
information.
9
Power Lumbar
Your vehicle may have
this feature. The driver’s
and passenger’s
seatback lumbar support
can be adjusted by
moving the control
located on the outboard
side of the seat
cushions.
To increase or decrease support, hold the control
forward or rearward. Keep in mind that as your
seating position changes, as it may during
long trips, so should the position of your lumbar
support. Adjust the seat as needed.
Heated Seats
If your vehicle has
heated front seats, the
buttons are located
on the climate
control panel.
There is one button for the driver and one for the
front passenger. Each button has three settings,
LO, HI and off. The active setting appears on
the climate control panel display. The LO setting
warms the seatback and cushion until the seat
approximates normal body temperature. The
HI setting has a slightly higher temperature.
10
To turn on the heated seats, press the button
once. The seat will heat to the HI setting. Press the
button again to switch to the LO setting. Pressing
the button a third time turns the system off.
The heated seats can only be used when the
ignition is turned on. When the vehicle is turned
off, the heated seats automatically turn off. If
you wish to have the heated seats on once the
vehicle is restarted, press the button again.
Memory Seat and Mirrors
If your vehicle has the memory feature, you can
program and recall memory settings for the driver’s
seating and outside rearview mirror driving
positions. Different adjustments can be
programmed for two drivers.
The buttons for this
feature are located on
the driver’s door
armrest.
Use the following steps to program the buttons:
1. Adjust the driver’s seat including the seatback
recliner and both outside mirrors.
2. Press and hold button 1 for at least
three seconds.
Two beeps will sound to confirm that the seat
and mirror positions have been saved.
3. Repeat the procedure for a second driver
using button 2.
11
If your vehicle has an automatic transmission, the
vehicle must be in PARK (P) to recall the stored
driving positions.
If your vehicle has a manual transmission and the
engine is running, the parking brake must be
set to recall the memory seat driving positions. The
stored driving positions can be recalled without
setting the parking brake if the vehicle is off.
Press one of the numbered memory buttons to
recall the stored setting. Each time a memory
button is pressed, a single beep will sound.
Three chimes will sound and the setting will not
be recalled if you press button 1 or 2 when
the vehicle is not in PARK (P) on an automatic
transmission or the parking brake is not set on a
manual transission.
If you would like the stored driving positions to be
recalled when unlocking your vehicle with the
Remote Keyless Entry transmitter or after the key
is placed in the ignition, see DIC Vehicle
Personalization on page 239.
To stop recall movement of the memory feature at
any time, press one of the power seat or mirror
controls.
Two personalized exit positions can also be
programmed. Use the following steps to program
exit positions:
1. Press memory seat button 1 or the unlock
button on the RKE transmitter, that has the
number 1 on the back of it, to recall the driving
position.
2. Adjust the driver’s seat to the desired exit
position.
12
3. Press and hold the exit button located above
buttons 1 and 2 on the driver’s door armrest
for at least three seconds.
Two beeps will sound to confirm that the exit
position has been saved.
4. Repeat the procedure for a second driver using
memory seat button 2 or the RKE transmitter,
that has the number 2 on the back of it.
To recall the stored exit positions, press and
release the exit button. One beep will sound, and
the seat will move to the stored exit position
for that driver. If an exit position has not been
stored for this driver, the seat will move all the way
back. The position of the outside mirrors does
not change for the exit position.
If your vehicle has an automatic transmission, the
vehicle must be in PARK (P) to recall the exit
positions. If your vehicle has a manual transmission
and the engine is running, the parking brake must
be set to recall the stored exit positions.
Three chimes will sound and the exit setting will
not be recalled if you press the exit button
when the vehicle is not in PARK (P) on an
automatic transmission or the parking brake is not
set on a manual transmission.
If you would like your stored exit position to be
recalled when unlocking the vehicle with the RKE
transmitter, or when the ignition is turned off
and the driver’s door is opened, see DIC Vehicle
Personalization on page 239.
13
Reclining Seatbacks
Manual Reclining Seatbacks
{CAUTION:
You can lose control of the vehicle if you
try to adjust a manual driver’s seat while
the vehicle is moving. The sudden
movement could startle and confuse you,
or make you push a pedal when you do
not want to. Adjust the driver’s seat only
when the vehicle is not moving.
{CAUTION:
If the seatback is not locked, it could
move forward in a sudden stop or crash.
That could cause injury to the person
sitting there. Always push and pull on the
seatback to be sure it is locked.
If your front passenger’s seat has a manual
reclining seatback, the lever used to operate it is
located on the outboard side of the seat.
To recline the seatback, do the following:
1. Lift the recline lever.
2. Move the seatback to the desired position,
then release the lever to lock the seatback
in place.
3. Push and pull on the seatback to make sure it
is locked.
14
To return the seatback to an upright position, do
the following:
1. Lift the lever fully without applying pressure to
the seatback and the seatback will return to
the upright position.
2. Push and pull on the seatback to make sure it
is locked.
Power Reclining Seatbacks
If your seats have power reclining seatbacks, use
the vertical power seat control located on the
outboard side of each seat.
To recline the seatback, press the control
toward the rear of the vehicle.
To raise the seatback, press the control
toward the front of the vehicle.
15
{CAUTION:
Sitting in a reclined position when your
vehicle is in motion can be dangerous.
Even if you buckle up, your safety belts
cannot do their job when you are reclined
like this.
The shoulder belt cannot do its job. In a
crash, you could go into it, receiving neck
or other injuries.
The lap belt cannot do its job either. In a
crash the belt could go up over your
abdomen. The belt forces would be there,
not at your pelvic bones. This could cause
serious internal injuries.
For proper protection when the vehicle is
in motion, have the seatback upright.
Then sit well back in the seat and wear
your safety belt properly.
Do not have a seatback reclined if your vehicle is
moving.
16
Head Restraints
Adjust the head restraint so that the top of the
restraint is at the same height as the occupant’s
head. This position reduces the chance of a
neck injury in a crash.
Pull the head restraint
up to raise it. To lower
the head restraint,
press the button,
located on the top of the
seatback, and push
the head restraint down.
All the head restraints can tilt forward and
rearward.
The rear head restraints can be removed from the
seatback. To do this, press the button, located
on the top of the seatback, and pull the head
restraint all the way out.
17
Rear Seats
Split Folding Rear Seat
Your vehicle may have a split folding rear seat.
A split folding rear seat allows you to carry
long cargo by folding down part or all of the
rear seat.
Use the following steps to lower one or both of the
rear seatbacks:
1. Your vehicle may
have a detachable
anchor on the
center safety belt.
Insert a tool
with a small tip into
the slot as shown
to unlatch the safety
belt buckle. Then
move the belt to the
side so it is not in
your way.
2. There is a tab
located on the
outboard sides of
the seatback.
Pull forward on the
tab to unlock the
seatback.
Notice: Folding a rear seat with the safety
belts still fastened may cause damage to the
seat or the safety belts. Always unbuckle
the safety belts and return them to their normal
stowed position before folding a rear seat.
3. Fold the seatback down. This will allow you
direct access to the trunk.
18
To return the seatback to the upright position,
do the following:
{CAUTION:
If the seatback is not locked, it could
move forward in a sudden stop or crash.
That could cause injury to the person
sitting there. Always push and pull on the
seatback to be sure it is locked.
1. Lift the seatback up and push it back into place.
{CAUTION:
A safety belt that is improperly routed,
not properly attached, or twisted will
not provide the protection needed in a
crash.The person wearing the belt could
be seriously injured. After raising the
CAUTION: (Continued)
CAUTION: (Continued)
rear seatback, always check to be sure
that the safety belts are properly routed
and attached, and are not twisted.
2. Reconnect the
center safety
belt latch plate to
the buckle.
3. Make sure the seatback is locked into place
by pushing and pulling on it.
4. Repeat Steps 1 and 3 for the other seatback.
When the seatback is not in use, it should be
kept in the upright, locked position.
19
Safety Belts
Safety Belts: They Are for Everyone
This part of the manual tells you how to use
safety belts properly. It also tells you some things
you should not do with safety belts.
{CAUTION:
Do not let anyone ride where he or she
cannot wear a safety belt properly. If you
are in a crash and you are not wearing a
safety belt, your injuries can be much
worse. You can hit things inside the
vehicle or be ejected from it. You can be
seriously injured or killed. In the same
crash, you might not be, if you are
buckled up. Always fasten your safety
belt, and check that your passengers’
belts are fastened properly too.
20
/