Eurotech CPU-163-15 Owner's manual

Brand: Eurotech

Model: CPU-163-15

Category: Graphics cards

Type: Owner's manual

CPU

-163-15

COM Express Mini Type 10

- Intel Atom, ECC Memory

USER MANUAL

-0 – 16 May 2018 – CPU-163-15_UserMan_EN_1-0 – ENGLISH

Trademarks

All trademarks and registered trademarks are the property of their respective owners.

Intended audience for this document

This document is intended for system integrators: skilled persons with a thorough knowledge in linking

together different computing systems and software applications physically or functionally, to operate as a

coordinated whole, in compliance with the applicable regulations.

Disclaimer of liability

Eurotech has reviewed the contents of this document to ensure accuracy and consistency with the hardware

and software described.

Always refer to the latest available manual revision available at: www.eurotech.com.

Revision history

Revision

Description

Date

1-0

First release

16 May 2018

CPU-163-15 User Manual 1-0 Contents

3 /

CONTENTS

Contents ...................................................................................................................................................................... 3

1 Safety Instructions ............................................................................................................................................. 5

1.1 Safety messages used in this document ................................................................................................. 5

1.1.1 Safety messages for hazards with a high level of risk ............................................................ 5

1.1.2 Safety messages for hazards with a medium level of risk ...................................................... 6

1.1.3 Safety messages for hazards with a low level of risk .............................................................. 6

1.2 Other messages used in this document .................................................................................................. 6

1.2.1 Instructions on how to use the product effectively and avoid any damage ............................ 6

1.3 How to prevent electrostatic discharge.................................................................................................... 7

1.4 How to prevent electrical hazards ........................................................................................................... 7

2 How to receive Technical Assistance............................................................................................................. 9

2.1 How to ask for technical support ............................................................................................................. 9

2.2 How to send a product for repair ............................................................................................................. 9

3 Declaration of conformity ............................................................................................................................... 11

3.1 CE Marking ............................................................................................................................................ 11

3.2 WEEE compliance ................................................................................................................................. 11

3.3 RoHS compliance .................................................................................................................................. 11

4 Before using the product ................................................................................................................................ 12

5 Product specifications .................................................................................................................................... 13

5.1 Features ................................................................................................................................................. 15

5.1.1 Watchdog Timer .................................................................................................................... 15

5.1.2 DDR3L ................................................................................................................................... 15

5.1.3 Graphics ................................................................................................................................ 15

5.1.4 Serial ATA ............................................................................................................................. 15

5.1.5 Gigabit LAN ........................................................................................................................... 15

5.1.6 USB ....................................................................................................................................... 15

6 Concept ............................................................................................................................................................. 16

6.1 COM Express Module Standards .......................................................................................................... 16

6.2 Specification Comparison Table ............................................................................................................ 17

7 Hardware Installation ....................................................................................................................................... 19

7.1 Board Layout ......................................................................................................................................... 19

7.2 Block Diagram ....................................................................................................................................... 20

7.3 Mechanical Diagrams ............................................................................................................................ 21

7.3.1 CPU board with Heat Sink (sold separately) ......................................................................... 21

7.3.2 CPU board ............................................................................................................................. 22

7.4 System Memory ..................................................................................................................................... 23

7.5 Connectors ............................................................................................................................................ 24

7.5.1 CPU Fan Connector .............................................................................................................. 24

7.5.2 COM Express Connector ...................................................................................................... 24

7.5.3 COM Express Connector Signal Description ........................................................................ 27

7.6 Cooling ................................................................................................................................................... 33

7.6.1 Heat Sink ............................................................................................................................... 33

7.7 Installing the CPU-163-15 on the carrier board ..................................................................................... 34

Troubleshooting ....................................................................................................................................................... 37

Contents CPU-163-15 User Manual 1-0

/ 40

Troubleshooting Checklist................................................................................................................................ 37

Monitor/Display ................................................................................................................................................ 37

If the display screen remains dark after the system is turned on: ....................................................... 37

The picture seems to be constantly moving. ....................................................................................... 37

The screen seems to be constantly wavering. .................................................................................... 37

Power Supply ................................................................................................................................................... 37

When the computer is turned on, nothing happens............................................................................. 37

Hard Drive ........................................................................................................................................................ 38

Hard disk failure. .................................................................................................................................. 38

Excessively long formatting period. ..................................................................................................... 38

Serial Port ........................................................................................................................................................ 38

The serial device (modem, printer) doesn’t output anything or is outputting garbled characters. ...... 38

Keyboard .......................................................................................................................................................... 38

Nothing happens when a key on the keyboard was pressed. ............................................................. 38

System Board .................................................................................................................................................. 38

Notes ......................................................................................................................................................................... 39

CPU-163-15 User Manual 1-0 Safety Instructions

5 /

1 SAFETY INSTRUCTIONS

READ CAREFULLY AND UNDERSTAND THE INSTRUCTIONS AND WARNINGS CONTAINED IN

THIS DOCUMENT BEFORE INSTALLING / USING THE PRODUCT.

KEEP THIS DOCUMENT FOR FUTURE REFERENCE.

To lower the risk of personal injury, electric shock, fire or damage to equipment, observe the

instructions and warnings contained in this document.

Failure to comply with the instructions and warnings contained this document, violates the standards of

safety, design, manufacture, and intended use of the product.

Eurotech assume no liability for any damage caused by failure to observe the instructions and

warnings contained this document.

Whenever you have any doubt regarding the correct understanding of this document, contact the

Eurotech Technical Support (for more information see “How to receive Technical Assistance” on page

9).

1.1 Safety messages used in this document

1.1.1 Safety messages for hazards with a high level of risk

To indicate a hazard with a high level of risk which, if not avoided, will result in death or serious

injury, the following safety message is used; the message also contains the safety instructions to

follow to avoid any hazard:

DANGER

Example:

DANGER

HIGH VOLTAGE INSIDE.

CONTACT WILL CAUSE ELECTRIC SHOCK OR BURN.

Turn OFF and disconnect power before opening the rack.

Safety Instructions CPU-163-15 User Manual 1-0

/ 40

1.1.2 Safety messages for hazards with a medium level of risk

To indicate a hazard with a medium level of risk which, if not avoided, could result in death or

serious injury, the following safety message is used; the message also contains the safety

instructions to follow to avoid any hazard:

WARNING

1.1.3 Safety messages for hazards with a low level of risk

To indicate a hazard with a low level of risk which, if not avoided, could result in minor or moderate

injury, the following safety message is used; the message also contains the safety instructions to

follow to avoid any hazard:

CAUTION

1.2 Other messages used in this document

1.2.1 Instructions on how to use the product effectively and avoid any damage

To indicate:

• Instructions on how to use the product effectively

• Instructions on how to avoid damaging the product or third-party property (not related to personal

injury),

the following message is used:

NOTICE

SIGN

(if necessary)

Text with the instructions to follow to complete the specific task

(written with bold characters).

CPU-163-15 User Manual 1-0 Safety Instructions

7 /

1.3 How to prevent electrostatic discharge

NOTICE

HOW TO PREVENT DAMAGING ELECTROSTATIC-SENSITIVE DEVICES

The symbol on the left is applied on electrostatic-sensitive devices.

To prevent damaging electrostatic-sensitive devices:

• Handle the electrostatic-sensitive devices in an ESD Protected Area (EPA)

• Observe the appropriate antistatic precautions. For example: use a wrist

strap kept in constant contact with bare skin and attached to ground.

1.4 How to prevent electrical hazards

Before supplying power to the product, observe all the instructions for safety, installation, and

operation.

DANGER

Failure to supply power correctly and failure to follow all safety instructions, may create an

electric shock hazard, which could result in personal injury or loss of life, and may damage

the product or other property.

To prevent electrical hazards:

• Before using the product, carefully read the supplied instructions

• Never operate with wet hands

• Check any power cords for damage before using them

• Use certified power cables. The power cables must meet the power requirements of the

device

•

Position cables with care. Avoid positioning cables in places where they may be trampled

or compressed by objects placed on them

• Verify that power-points and plugs are not damaged. Avoid overloads

• Always disconnect power and discharge the circuits before touching them

• Use a power supply that meets the requirements stated on the identification label of the

product. In case of uncertainties about the required power supply, contact the Eurotech

Technical Support Team (for more information see “How to receive Technical

Assistance” on page 9).

(This page has been intentionally left blank)

CPU-163-15 User Manual 1-0 How to receive Technical Assistance

9 /

2 HOW TO RECEIVE TECHNICAL ASSISTANCE

2.1 How to ask for technical support

To ask for technical support, complete the following steps:

1. Go to the Eurotech Global Support Center: https://support.eurotech.com/

2. Submit a support request

3. Wait for the reply from your Support Team with the information you required.

2.2 How to send a product for repair

To send a product for repair, complete the following steps:

1. Go to the Eurotech Global Support Center: https://support.eurotech.com/

2. Submit an RMA request

3. Wait for the reply from the Eurotech RMA Department. It will contain:

o The RMA number

o The shipping information

4. Pack the product adequately using anti-static material and place it in a sturdy box with enough

packing material to protect it from shocks and vibrations

5. Ship the product to Eurotech following the information received from the RMA

Department.

NOTICE

Any product returned to Eurotech that is found to be damaged due to inappropriate packaging

will not be covered by the warranty.

(This page has been intentionally left blank)

CPU-163-15 User Manual 1-0 Declaration of conformity

11 /

3 DECLARATION OF CONFORMITY

3.1 CE Marking

The product described in this document is CE marked.

Eurotech is not responsible for the use of this product together with equipment (for

example: power supplies, personal computers, etc.) that are not CE marked and not

compliant with the requirements specified in this document.

3.2 WEEE compliance

In compliance with the Directive 2012/19/EU of the European Parliament and of the Council

of 4 July 2012 on waste electrical and electronic equipment (WEEE), the symbol on the

right, shown on the product or within its literature, indicates separate collection for electrical

and electronic equipment (EEE) that has been placed on the market after 2005.

The product described in this document, at the end of its life cycle, must be collected

separately and managed in accordance with the provisions of the current Directive on

waste of electrical and electronic equipment.

Because of the substances present in the product, improper disposal can cause damage to

human health and to the environment.

To avoid any possible legal implications, contact your local waste collection body for full

collect and recycling information.

3.3 RoHS compliance

The product described in this document, including all its components and its sub-assemblies, have

been manufactured in compliance with the Directive 2011/65/EU of the European Parliament and of the

Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and

electronic equipment.

Before using the product CPU-163-15 User Manual 1-0

/ 40

4 BEFORE USING THE PRODUCT

NOTICE

PREVENT ELECTROSTATIC DISCHARGE (ESD)

Always prevent electrostatic discharge: electrostatic discharge can damage

your boards, processor, disk drives, add-in boards, and other components.

To prevent electrostatic discharge:

• Handle the electrostatic-sensitive devices in an ESD-protected area

• Observe the appropriate antistatic precautions. For example: use a wrist

strap kept in constant contact with bare skin and attached to ground

Before using the product:

1. Install the Heat Sink (sold separately)

2. Setup the following components:

o Storage devices (for example a hard disk drive)

o Keyboard

o Mouse

o Display.

CPU-163-15 User Manual 1-0 Product specifications

13 /

5 PRODUCT SPECIFICATIONS

Specification

Description

Processor

• Intel

Atom

/Intel

Celeron

processors

o Intel

Atom

E3845, Quad Core, 2M Cache, 1.91GHz, 10W

o Intel

Atom

E3827, Dual Core, 1M Cache, 1.75GHz, 8W

o Intel

Atom

E3815, Single Core, 0.5M Cache, 1.46GHz, 5W

o Factory option:

 Intel

Celeron

J1900, Quad Core, 2M Cache, 2GHz (2.41GHz), 10W

 Intel

Celeron

N2930, Quad Core, 2M Cache, 1.83GHz (2.16GHz), 7.5W

• BGA 1170 packaging technology

•

22nm process technology

System memory

• 2GB/4GB DDR3L ECC memory down

• Supports DDR3L 1333MHz ( Intel

Atom

E3845/ E3827)

• Supports DDR3L 1066MHz ( Intel

Atom

E3815)

• Supports single channel memory interface

Graphics

• Intel® HD Graphics

• Supports LVDS and DDI interfaces

• LVDS: NXP PTN3460, 18/24-bit, single channel, resolution up to 1366x768 @60Hz

• Digital Display Interfaces: HDMI, DVI and DP

o HDMI, DVI: resolution up to 1920x1080 @60Hz

o DP: resolution up to 2560x1600 @60Hz

• Supports hardware acceleration for DirectX 11, OCL 1.2, OGL 4.0, H.264, MPEG2,

MVC, VC-1, WMV9 and VP8 (supported version dependent on OS)

Audio

• Supports High Definition Audio interface

LAN

• Intel® I210 Gigabit Ethernet Controller

• Integrated 10/100/1000 transceiver

• Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab

Serial ATA

• Supports 2 Serial ATA interfaces

• SATA 2.0 with data transfer rate up to 3Gb/s

• Integrated Advanced Host Controller Interface (AHCI) controller

Expansion

interfaces

• Supports 1 USB 3.0 port

• Supports 8 USB 2.0 ports

o 4 integrated USB 2.0 ports

o 1 USB HSIC for 4 USB 2.0 ports

• Supports 3 PCIe x1 (default); or x1 without GLAN * (factory option)

• Supports LPC interface

• Supports I2C interface

• Supports SMBus interface

• Supports 2 serial interfaces (TX/RX)

• Supports 8-bit Digital I/O

eMMC

• Supports 8GB eMMC onboard (factory option: 4GB, 16GB and 32GB)

Watchdog Timer

• Watchdog timeout programmable via software from 1 to 255 seconds

System Monitors

• Monitors CPU/system temperature and overheat alarm

• Monitors Vcore/Vgfx/VDDR/3V3 voltages and failure alarm

• Watchdog timer function

Product specifications CPU-163-15 User Manual 1-0

/ 40

OS Support

• CentOS

• Windows 10 IoT Enterprise

• Support for custom carriers (Prof. Services):

o Fedora/CentOS

o Debian

o Win 10 IoT Enterprise

o RedHat

Enterprise Linux

Temperature

• Operating:

o -40 to +85°C (Depending on the configuration)

o Factory option:

 0°C to +60°C

 -20°C to +70°C

• Storage: -40°C to 85°C

Humidity

• 5% to 90%

Power input

• 4.75V to 20V, 5VSB, VCC_RTC (ATX mode)

• 4.75V to 20V, VCC_RTC (AT mode)

Power

consumption

• CPU TDP: 10W (Intel

Atom

E3845)

• CPU TDP: 8W (Intel

Atom

E3827)

• CPU TDP: 5W (Intel

Atom

E3815)

PCB

• Dimensions

o COM Express® Mini

o 84 mm x 55 mm

• Compliance

o PICMG COM Express® R2.1, Type 10

CPU-163-15 User Manual 1-0 Product specifications

15 /

5.1 Features

5.1.1 Watchdog Timer

The Watchdog Timer function allows your application to regularly “clear” the system at the set time

interval. If the system hangs or fails to function, it will reset at the set time interval so that your system

will continue to operate.

5.1.2 DDR3L

DDR3L is a higher performance DDR3 SDRAM interface providing less voltage and higher speed

successor. DDR3L SDRAM modules support 1066/1333MHz for DDR modules. DDR3L de-livers

increased system bandwidth and improved performance to provide its higher bandwidth and its

increase in performance at a lower power.

5.1.3 Graphics

The integrated Intel® HD graphics engine delivers an excellent blend of graphics performance and

features to meet business needs. It provides excellent video and 3D graphics with out-standing

graphics responsiveness. These enhancements deliver the performance and compat-ibility needed for

today’s and tomorrow’s business applications. Supports HDMI, DVI and DP interfaces for up to 3

display outputs.

5.1.4 Serial ATA

Serial ATA is a storage interface that is compliant with SATA 1.0a specification. With speed of up to

3Gb/s (SATA 2.0), it improves hard drive performance faster than the standard parallel ATA whose

data transfer rate is 100MB/s.

5.1.5 Gigabit LAN

The Intel® I210 Gigabit LAN controller supports up to 1Gbps data transmission.

5.1.6 USB

The system board supports the new USB 3.0. It is capable of running at a maximum transmis-sion

speed of up to 5 Gbit/s (625 MB/s) and is faster than USB 2.0 (480 Mbit/s, or 60 MB/s) and USB 1.1

(12Mb/s). USB 3.0 reduces the time required for data transmission, reduces power consumption, and

is backward compatible with USB 2.0. It is a marked improvement in device transfer speeds

between your computer and a wide range of simultaneously accessible external Plug and Play

peripherals.

Concept CPU-163-15 User Manual 1-0

/ 40

6 CONCEPT

6.1 COM Express Module Standards

The illustration below shows the dimensions of the different types of COM Express modules.

This product is a COM Express Mini. The dimensions are 84mm x 55mm.

CPU-163-15 User Manual 1-0 Concept

17 /

6.2 Specification Comparison Table

The table below shows the COM Express standard specifications and the corresponding specifications

supported on the product.

(Continued on next page)

CPU-163-15

Concept CPU-163-15 User Manual 1-0

/ 40

(Continued from previous page)

Note:

• 5 Indicates 12V-tolerant features on former VCC_12V signals.

• 6 Cells in the connected columns spanning rows provide a rough approximation of features sharing

connector pins.

CPU-163-15 User Manual 1-0 Hardware Installation

19 /

7 HARDWARE INSTALLATION

7.1 Board Layout

Hardware Installation CPU-163-15 User Manual 1-0

/ 40

7.2 Block Diagram

Page is loading ...

Eurotech CPU-163-15 Owner's manual

Brand: Eurotech

Model: CPU-163-15

Category: Graphics cards

Type: Owner's manual

Download PDF

report

Eurotech CPU-163-15 Owner's manual

Eurotech CPU-163-15 Owner's manual

Related papers

Other documents