SINOX SEV5000 User manual

SEV5000
Brand
SINOX
Model
SEV5000
Type
User manual

SINOX SEV5000 is a portable EV charger that provides a convenient and user-friendly way to charge electric vehicles. With its plug-and-play design, you can easily connect it to your power outlet and vehicle inlet to start charging. It delivers a steady output current of 6A, ensuring efficient and reliable charging. The LED display offers clear status indications, including initial mode, connected mode, standard mode, and fault mode.

SINOX SEV5000 is a portable EV charger that provides a convenient and user-friendly way to charge electric vehicles. With its plug-and-play design, you can easily connect it to your power outlet and vehicle inlet to start charging. It delivers a steady output current of 6A, ensuring efficient and reliable charging. The LED display offers clear status indications, including initial mode, connected mode, standard mode, and fault mode.

2
PRODUCT DESCRIPTION
Appearance
3
SPECIFICATION
Item
Model
Install
Output Current
Rated power
Input Voltage AC
Waterproof Degree
Output Detection
1. Short circuit protection
2. Over and under frequency protection
3. Over Current Protection
4. Leakage Current Protection (restart recover)
5. Over Temperature Protection
6. Overload protection (self-checking recover)
7. Ground Protection
8. Over voltage and under-voltage protection
Operating
Temperature -25 ~+55
Storage Temperature -40 ~+80
Operating Humidity 20%-85%
200mm(L) X 93mm(W)X51.5mm(H)
Cable Length 5.0m
2.30kg
Weight
Standard
Carton Measure 42CM*42CM*8CM
IEC 62752, IEC 61851
EV Charger Box
Dimension
Mode 2 EV Charger Cable 16A
SEV5000 / SXEC1615
Portable, Plug and Play
6A Max.
3.6KW Max
110V~250V 50Hz/60Hz
IP66
4
LED DISPLAY
Green(One)
Light on
Light on
Light on Light on Light on
Lights Out Lights Out Lights Out
Lights Out Lights Out Lights Out
Lights Out Lights Out
Lights Out
Lights Out
Twinkle(1S)
Twinkle
Racing Light Racing Light Racing Light
Green(Two) Green(Three) Fault(Red)
Fault(Red)
Condion
Inial Mode
Connected Mode
Charging Mode
Finished Mode
LED Display Status
5
HOW TO ADJUST SETTING
The Charger is set to 6A.
OPEARATING INSTRUCTION
6
How to stop charging
How to start charging
(see CAUTION)
WARRANTY
7
CAUTION
Sinox Europe A/S
Troensevej 11. DK-9220 Aalborg
Sinox EV Charger
6A Portable EV Charger
(Mode 2)
Product Manual (EN)
Please read all instructions before using, operating or maintaining.
1
Sinox EV lader
6A transportabel EV lader
(Mode 2)
Brugervejledning (DK)
Læs alle instruktioner før brug, betjening eller vedligeholdelse.
1 2
PRODUKT BESKRIVELSE
æ
ååæ
ø
åø
ø
åæ
UDSEENDE
3
SPECIFIKATIONER
Vare
Model
Installation
Output effekt
Rated power
Input spænding AC
Vandtæt
Output Detection
1. Kortslutningsbeskyttelse
2. Over- og underfrekvensbeskyttelse
3. Over current beskyttelse
4. Beskyttelse mod lækage (genstart)
5. Temperaturbeskyttelse
6. Overbelastningsbeskyttelse (gendannelse
af kontrol)
7. Jordforbindelse
8. Over - og underspændingsbeskyttelse
Arbejds-
Temperatur -25 ~+55
Opbevaringtemp -40 ~+80
Arbejdsluftfugtighed 20%-85%
200mm(L) X 93mm(W)X51.5mm(H)
Kabellængde 5.0m
2.30kg
Vægt
Standard
Kartonmål 42CM*42CM*8CM
IEC 62752, IEC 61851
EV Charger Boks
Dimensioner
Mode 2 EV ladekabel 16A
SEV5000 / SXEC1615
Transportabel, Plug and Play
6A max
3.6KW max
110V~250V 50Hz/60Hz
IP66
4
LED DISPLAY
Grøn(et)
Tændt
Tændt
Tændt Tændt Tændt
Slukket Slukket Slukket
Slukket Slukket Slukket
Slukket Slukket
Slukket
Slukket
Blinkende
Blinkende
Blinkende Blinkende Blinkende
Green(Two) Green(Three) Fault(Red)
Fejl
Tilstand
Indledende
Tilsluet
Lader
Færdig
LED Display Status
5
INDSTILLING
Laderen er låst til 6A i henhold til danske anbefalinger
BETJENINGSINSTRUKTIONER
6
Start ladning
æ
ææ
ø
øå
(
Trin 5. Vi anbefaler, at ladekablet ikke bruges i mere end 2 timer.
7
VIGTIGT
Stop ladning
åøø
ææå
æ
GARANTI
ø
æ
åå
å æ
Sinox Europe A/S
Troensevej 11. DK-9220 Aalborg
ææ
æ
æ
æ
æ
æø
æ
ø
å
øæ
æ
åøøø
ååå
æ å
å
æ
æå
å
ååøæå
  • Page 1 1

SINOX SEV5000 User manual

SEV5000
Brand
SINOX
Model
SEV5000
Type
User manual

SINOX SEV5000 is a portable EV charger that provides a convenient and user-friendly way to charge electric vehicles. With its plug-and-play design, you can easily connect it to your power outlet and vehicle inlet to start charging. It delivers a steady output current of 6A, ensuring efficient and reliable charging. The LED display offers clear status indications, including initial mode, connected mode, standard mode, and fault mode.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Other documents