ND tackle TH9S User manual

Brand: ND tackle

Model: TH9S

Type: User manual

ND tackle TH9S is an anti-theft alarm system that can be registered with various ND tackle receivers and other compatible devices to protect your valuable fishing equipment. With its multiple channels, you can register up to four TH9S alarms with a single receiver, allowing you to monitor multiple rods simultaneously. The compact and lightweight design of the TH9S makes it easy to attach to your rod or reel, and its long battery life ensures reliable operation throughout your fishing session.

TH9S ANTI-THEFT ALARM

USER MANUAL

newdirectiontackle.co.uk

Email: Info@newdirectiontackle.co.uk

R9s Receiver HOW TO REGISTER ANTI-THEFT ALARM TH9s

TH9s ANTI-THEFT ALARM

1. Turn on the R9s receiver.

2. Press the multi-function button on the receiver down and

hold it to enter system menu.

3. Scroll down and choose "Register Alarm" menu.

4. Choose one of the A-EFT channels (A-EFT CHA1, A-EFT CHA2, A-EFT CHA3,

A-EFT CHA4). We recommend to start with A-EFT CHA1. Press the button down

to select the channel.

S9r Receiver HOW TO REGISTER ANTI-THEFT ALARM TH9s

2.Register ALARM

DOWN

PRESS

Reg RED

Reg GREEN

Reg BLUE

Reg YELLOW

Reg WHITE

Reg Light

Reg Camera

A-EFT CHA1

A-EFT CHA2

A-EFT CHA3

A-EFT CHA4

A-EFT CHA1

5. Turn on the TH9s Anti-Theft Alarm.

6. Press the right button on the TH9s twice.

7. Registration was successful when the display shows “SUCCESS”.

Please press the

ANTI THEFT button.

1. Turn on the S9r receiver.

2. Press the multi-function button on the receiver down and

hold it to enter system menu.

3. Scroll down and choose "Register Alarm" menu.

4. Choose one of the A-EFT channels (A-EFT CHA1, A-EFT CHA2, A-EFT CHA3,

A-EFT CHA4). We recommend to start with A-EFT CHA1. Press the button down

to select the channel.

B10 Smart Bite Watch HOW TO REGISTER ANTI-THEFT ALARM TH9s

Reg RED

Reg GREEN

Reg BLUE

Reg YELLOW

Reg WHITE

Reg Light

Reg Camera

A-EFT CHA1

A-EFT CHA2

A-EFT CHA3

A-EFT CHA4

A-FET CHA1

A-FET CHA2

A-FET CHA3

A-FET CHA4

Clear all CHA

Press

5. Turn on the TH9s Anti-Theft Alarm.

6. Press the right button on the TH9s twice.

7. Registration was successful when the display shows “SUCCESS”.

Please press the

ANTI THEFT button.

4. Choose one of the A-EFT channels (A-EFT CHA1, A-EFT CHA2, A-EFT CHA3,

A-EFT CHA4). We recommend to start with A-EFT CHA1. Press the button down

to select the channel.

1.Remote setup

2.Register alarm

3.Vitual band

4.Range test

5.Drop back set o

6.Date time set

7.Motor on

1.Remote setup

2.Register alarm

3.Vitual band

4.Range test

5.Drop back set o

6.Date time set

7.Motor on

1.Remote setup

2.Register alarm

3.Vitual band

4.Range test

5.Drop back set o

6.Date time set

7.Motor on

1. Turn on the B10 Smart Bite Watch.

2. Press the menu button on the receiver down and

hold it to enter system menu.

3. Scroll down and choose "Register Alarm" menu.

Press

SMART BAND B9 HOW TO REGISTER ANTI-THEFT ALARM TH9s

Reg success

Press the button

A-EFT1

5. Turn on the TH9s Anti-Theft Alarm.

6. Press the right button on the TH9s twice.

7. Registration was successful when the display shows “Reg SUCCESS”.

1. Turn on the Smart Band B9 by pressing and holding the button for a few seconds.

2. Turn on the TH9's anti-theft alarm.

3. Press the button twice to activate register mode. The LED will ash red.

4. Switch through the channels by pressing the button once. You must press the

button briey until the purple LED ashes. Note: The purple channel is the

anti-theft channel.

5. When the purple LED ashes, press and hold the button for 3 seconds until

the LED lights up continuously.

6. Press the button on the TH9s twice.

7. The registration was successful when the LED lights up again and the band vibrates.

Press

Three press with Button

on the H9pro

(only for H9PRO wireless version)

H9pro Headtorch HOW TO REGISTER ANTI-THEFT ALARM TH9s H10 Headtorch HOW TO REGISTER ANTI-THEFT ALARM TH9s

Press

Long Press Two buttons

5 seconds

1. Turn on the H9pro.

2. Turn on the Anti-Theft Alarm.

3. Enter register mode on the H9pro: Press the button on the H9pro

three times. The LED on the H9pro will ash

5. Press the right button on the TH9s twice.

6. The registration was successful when the LED lights up.

1. Turn on the H10 headtorch.

2. Turn on the TH9s Anti-Theft Alarm

3. Enter register mode on the H10 by pressing and holding the two

buttons down for 5 seconds.

The LED on the headtorch will ash.

4. Press the right button on the TH9s twice.

5. The registration was successful when the LED lights up.

Bivvy Light HOW TO REGISTER ANTI-THEFT ALARM TH9s Air Light Sounder (ALS) HOW TO REGISTER ANTI-THEFT ALARM TH9s

Press Press

Long press

5 seconds

1. Turn on the bivvy light.

2. Turn on the Anti-Theft Alarm

3. Double-click the button of the bivvy light; the light will ash red.

4. The ashing color indicates the channel. You can switch between

the channels by clicking on the button. You must select the purple channel.

5. As soon as the Bivvy light ashes in purple, press the button on the

TH9s Anti-Theft Alarm. Purple channel is the Anti-Theft channel.

6. The light will shortly ash when the operation was successful.

1. Turn on the ALS.

2. Turn on the TH9s Anti-Theft Alarm.

3. Enter register mode on the ALS: long press the M button until you hear a tone.

The LED on the ALS will ash red.

4. Press the button on the TH9s twice.

5. Registration was successful when the RED LED lights up.

ND tackle TH9S User manual

ND tackle TH9S User manual

ND tackle TH9S User manual

Related papers

Other documents