Azoteq IQS624 User guide

  • Hello! I am an AI chatbot trained to assist you with the Azoteq IQS624 User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
IQ Switch®
ProxFusion Series
Copyright © Azoteq 2016
IQS624EV01 Overview
Page 1 of 1
All Rights Reserved
Revision 1.0
August 2016
IQS624EV01 Overview
Hall effect angle sensor with dual channel capacitive proximity/touch controller
The IQS624 ProxFusion IC is a multifunctional capacitance and Hall effect controller
designed for applications where any or all of the technologies may be required. The two Hall-
effect sensors calculate the angle of a magnet rotating parallel with the chip. The IQS624 is
an ultra-low power hall-effect rotation sensor. The sensor is fully I2C compatible and on-chip
calculations enable the IC to stream the current angle of the magnet without extra
calculations.
EV-Kit Overview
Hall-effect sensing
Capacitive sensing
Evaluation Modes
EV01 contains 3 x Modules
Embed the small module PCB (stamp) into custom design & interface to host MCU
Applications
Anemometer
Dial or Selector knob
Mouse wheel
Gaming steering wheel
Measuring wheel
Digital angle gauge
Speedometer for bicycle
Detachable Stamp Module x 3
/