F-531
User Manual
Thank you for purchasing our
product. This manual addresses
the safety guidelines, warranty,
and operating instructions. Please
review this manual thoroughly
before operating your device.
Ring Fill Light
Package Contents................................................................
At a Glance..........................................................................
Installation Guide.................................................................
Using Your Ring Fill Light...................................................
Specifications......................................................................
SAFETY AND WARRANTY.................................................
Contents
1
2
5
10
14
16
Package Contents
Flexible Phone Holder × 1
Phone Holder × 1
Selfie Remote Control × 1
User Manual × 1
1
Ring Fill Light × 1
Tripod Stand × 1
Ball Head A × 1
Ball Head B × 1
F-531
User Manual
Thank you for purchasing our
product. This manual addresses
the safety guidelines, warranty,
and operating instructions. Please
review this manual thoroughly
before operating your device.
Ring Fill Light
At a Glance
2
USB Connector
LED Panel
Light Controller
Screw Hole
1. Ring Fill Light
2. Tripod Stand
Screw
3
Ball Head Fastener
360°Ball Head
Screw
Screw
3. Ball Head A
4. Ball Head B
360° Ball Head
Ball Head Fastener
Screw Hole
Screw
4
5. Flexible Phone Holder
6. Phone Holder
Phone Holder
Flexible Tube
Screw
Screw Hole
Installation Guide
5
Installing Ring Fill Light
1. Screw ball head A into the
screw hole on the tripod stand.
2. While holding the ring fill light
in one hand, screw ball head A
into the bottom of the light.
6
3. Pull out the three legs
of the tripod stand and
place it on your desk.
4. Loosen the fastener of ball
head A, adjust the ring fill
light to your desired angle,
and then tighten the
fastener.
Note:
Please extend the three legs of the tripod stand as much as
possible to ensure its stability.
7
Installing Phone Holder
1. Screw ball head B into the screw hole on the ring fill light and
then screw the phone holder into ball head B.
2. Loosen the fastener of ball
head B, adjust the phone
holder to your desired angle,
and then tighten the fastener.
8
Screw the flexible phone holder into
the screw hole on the ring fill light.
You can also install your phone on the stand using the flexible
phone holder.
Up to 3.7 inches
Up to 3.6 inches
Extendable Phone Holders
9
End Result
15.5 inches
10
Increase Brightness
Change Lighting Mode
Decrease Brightness
Power Button
Note:
Our ring fill light has mode memory. When turned on, it will be set to
the last used mode (When you disconnect the power, it will be reset
to factory settings).
On/off
M
Model
Up
Down
Using Your Ring Fill Light
Power on
Adjust Brightness & Change Lighting Mode
After mounting the ring fill light on the tripod stand, connect the USB
connector of the ring fill light to a USB wall charger or computer USB
port that is powered on (5V / 2A).
Press the power button to turn the light on, press the up / down button to
increase / decrease the brightness (10 levels). Press the mode button to
change lighting mode (white / natural / warm).
11
1) Turn on the Bluetooth of your phone.
2) Slide the power switch to ON. The remote control will enter pairing
mode (the LED indicator will flash blue).
3) Choose "AB Shutter3" from the list of found Bluetooth devices on
your phone to pair.
● Pair
Use Selfie Remote Control
Battery Cover
Button A
(Shutter for iPhones)
Button B
(Shutter for Android Phones)
Power Switch
LED Indicator
12
● Select App
You can use the built-in camera app of your phone to take photos with
our selfie remote control or you can download "Camera 360" app from
Google Play store. Please check the Compatible Devices table for
compatible devices and apps.
● Take a Photo / Start Recording
When our selfie remote control is successfully paired with your phone,
open the camera app, press Button A or Button B on the remote control
depending on your phone type to take a photo / start recording.
Note
When the selfie remote control is connected to your phone, you may
encounter text input problem, please go to your smartphone "Settings"
→ "System" → "Keyboard & Input Method" and select system default
input method.
13
Compatible Devices
Compatible Devices
Compatible with iOS 6.0 OS or
newer (e.g, iPhone 11/11
Pro/11 Pro Max, iPhone XS/XS
Max, iPhone XR, iPhone X,
iPhone8/8P, iPhone7/7P,
iPhone6/6S/6P/6SP,
iPhoneSE, iPhone 5S/5C/5,
iPhone 4S/4, iPad 3/2, iPad
mini, iPad with Retina Display,
iPod touch 4th).
Compatible with Android 4.2.2
OS or newer (e.g., Samsung
Galaxy S2/S3/S4/S10/S20
5G/S20 Ultra 5G, Samsung
Galaxy Note 1/2/3/8/9/10,
Moto X, Nexus 4/5/7+, Xiaomi
1S/2S/3+)
Sony Xperia S
HTC New one and X+
Built-in
Camera App Camera 360 App
C
A
M
E
R
A
3
6
0
iOS
C
A
M
E
R
A
3
6
0
iOS
C
A
M
E
R
A
3
6
0
iOS
C
A
M
E
R
A
3
6
0
iOS
android
Not Applicable
Specifications
14
F-531
ABS+PC
10.2 inches / 0.26 meters (outer diameter)
8.1 inches / 0.21 meters (inner diameter)
White / Natural / Warm
3000K to 6000K
10 levels
1100 to 2200 lm
120
USB
5V / 2A
10W
10 feet / 3 meters
Model
Material
Ring Diameter
Lighting Mode
Color Temperature
Adjustable Brightness
Lumens
Number of LED Bulbs
Power Supply Mode
Input Power
Output Power
Power Cord Length
Specifications (Ring Fill Light)
15
AB Shutter3
V4.0
33 feet / 10 meters
CR2032
Approximately 6 months
(average use of 10 times a day)
Model
Bluetooth Version
Bluetooth Connection
Distance
Battery Type
Battery Life
Specifications (Selfie Remote Control)
16
SAFETY AND WARRANTY
● This product must be used with an input power of 5V / 2A, and low
power input will reduce the brightness of the ring fill light.
● Do NOT try to dismantle or modify the product.
● Keep this product away from water and any flammable gases or liquids.
● Do NOT repair the product in dangerous places such as gas, steam,
etc. It is easy to conduct electricity in a humid environment.
● Do not let any liquid flow into the product, as this may seriously damage
the product.
● Do NOT use the product in the environment where the room
temperature is lower than 0°C (32°F) or higher than 45°C (113°F).
● Clean the product only with a dry, soft cotton cloth or equivalent. Do not
scrub it with gasoline, volatile oil, etc.
● If an abnormal situation occurs, stop using the product and cut off the
power immediately.
● Keep the product clean. When the product is not in use, store it
properly.
● Keep the product out of the reach of children.
Safety Instructions
17
Warranty
We strive to build our products with the highest attention to detail and
craftsmanship. However, sometimes there are occurrences of defect.
We are happy to offer a one-year hassle-free warranty to all our
products as we continue to make amazing products. Please contact us
if you have any questions about our devices.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
