Minka Group F831L-FLR User manual

Brand: Minka Group

Model: F831L-FLR

Type: User manual

Tear

©2018 Minka Lighting Inc.Manual design and all elements of manual design are protected by United States Federal and/or State Law including

Patents, Trademark, and/or Copyright Laws.

F831L

INSTALLING THE LIGHT KIT

8

9

0

DC8 FAN

wattage

D.

light kit hardware

5/32*7mm+S(4 pcs)

1. Fan Body

2. LED assembly

3. coupler cover

4. Fan blade(3 pcs)

5. Canopy

6. light kit plate

7. light shade

8. downrod assembly

9. hanger bracket

10. canopy cover

11. hand held remote

with 2 screws(include

batteries)

12. receiver(include 6 wire nuts)

A Fan blades attachment screw

1/4*16mm+S screw(10 pcs)

#8-18*19mm screw(4 pcs)

1/4(Φ6.6*13*0.8mm）flat

washer(10 pcs)

Step 1: Assemble the 3 blades together with the

provided blade attachment screw. (Fig. 5)

Step 2: Install the blade assembly to the motor .

ATTACHING THE FAN BLADE

Fig.5 Fig.6

,and slip the coupler cover on to the fan body.

7

8

9

2

hanger

0

Fig.7 Fig.8 Fig.9 Fig.10 Fig.11 Fig.12

Fig.14

5

4

Fig.15 Fig.16

Motor to Receiver electrical connections: connect the WHITE

WIRE from the fan to the WHITE wire from receiver. Connect the RED wire

from the fan to the RED wire from the Receiver. Connector the BLUE wire

from the fan to the BLUE wire from the recelver. connect the PURPLE

wire from the fan to the PURPLE wire from the receiver. Connect the

GREY wire from the fan to the GREY wire from the receiver.

Step 4 Receiver to House Supply Wires Electrical connections: Connect

the WHITE wire from the outlet box to the WHITE wire from the receiver.

Connect the BLACK wire from the outlet box to the BLACK wire from the

receiver. Secure all wire connections with the plastic wire nuts provided.

4

Downrod

Hanger

Bracket

White

White

Red

Blue

Purple

Grey

Green wire

Black

Fig.17 Fig.18 Fig.19

7

8

9

Hanger

Bracket

Screw

Receiver

Canopy

Screw

Screw

Canopy

Canopy Cover

cover

INSTALLING THE LIGHT KIT

Step 1: Remove 1 of 3 screws on light kit adapter and loosen

the other 2 screws.(Fig. 20)

Step 2: Slide the light kit plate up towards the light kit adapter and

place the key holes over the screws on the light kit adapter. Turn

light kit plate until it locks in place at the narrow section of key holes.

(Fig. 21)

Step 3: Align the round hole of the light kit plate with light kit adapter,

tighten all 3 screws.(Fig. 22)

Step 4: Connect the wires between the fan and LED assembly with

the connectors.(Fig. 23)

Step 5: Tighten the LED assembly to light kit plate with 3 screws.

(Fig. 24)

Step 6: Align the slot of the light shade with the aised dimple on the

light kit plate and turn it clockwise until it stops.(Fig. 25)

Fig.20 Fig.21 Fig.22 Fig.23 Fig.24 Fig.25

wattage

9

(COUNTERCLOCKWISE DIRECTION)

(CLOCKWISE DIRECTION)

Fig.26 Fig.27

26

27

Page is loading ...

Page is loading ...

Page is loading ...

Page is loading ...

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24

Minka Group F831L-FLR User manual

Brand: Minka Group

Model: F831L-FLR

Type: User manual

Download PDF

Related papers

Other documents