Binary BT-1ENDZ-RCA-1 Owner's manual

EQUIPMENT & TOOLS REQUIRED

 •OneBT-1ENDZ-RCA-X(1Mor3M)•Cablestrippingtool

INSTALLATION INSTRUCTIONS

CableStripwireandpullbackbraidingover

cablejacket.Approximatley3/8inchofbare

coppershouldbevisible,and3/8inchofvisible

dialectric.

Insertdie-castconnectorbodyandplastic

sleeveoverstrippedend.Ensureplastic

sleevesitsoverthecablebraiding.

InsertRCAconnectorheadontobare

coppercenterandalignthenotchon

theconnectorbodytotheRCA

connectorhead.

Whilekeepingtheplasticsleevenotch

inserted,screwtheconnectorbodyonto

theRCAconnectorhead.Therewillbe

a1mm(1/16in)gapforthecoloredband.

Addthecoloredband.

•BT-1ENDZ-RCA-1 •BT-1ENDZ-RCA-3

ForTechnicalSupport:1.866.424.4489

Binary™ 1ENDZ RG6 Cable with Tool-less RCA

100305

1mmgap

This manual is also suitable for