Bartscher 850035 Operating instructions

Installation and Cleaning Instructions

Hygiene screen 850033 / 1000PGLD – Hygiene screen 850035 / 1500PGLD

• Before installing the hygiene screen, remove double-sided protective films from all elements.

• Install the hygiene screen in a selected location. Observe the above illustration. When installing do not use

force.

• Use a soft, damp cloth or sponge to remove dust and soiling from the plexiglass surface. Never clean dry!

If needed, use mild solution of water and soap, as well as special cleaning agents for plexiglass.

ATTENTION!

DO NOT use solvents, alkaline cleaning agents nor window cleaning agents with ammonium

hydroxide (ammonia) or iron, as they may damage the surface.

• For the purpose of disinfecting the plexiglass, we recommend using Sanytol disinfecting agent or a 50%

ISOPROPYL ALCOHOL solution.

Bartscher GmbH phone: +49 5258 971-0

Franz-Kleine-Str. 28 fax: +49 5258 971-120

33154 Salzkotten Service-Hotline: +49 5258 971-197

Germany www.bartscher.com

This manual is also suitable for

Download PDF