www.ablenetinc.com
Quickstart Guide
AbleNet Keyguards
1. Remove paper backer from Dual Lock Assembly
2. Place Dual Lock Assembly on Keyguard. (suggested locations marked with )
3. Remove paper backer from other side of Dual Lock Assembly.
4. Place Keyguard on keyboard.
*Note: For additional height of keyguard, stack Dual Lock assemblies.
98000055B 02/20 70500254B
www.ablenetinc.com
Quickstart Guide
AbleNet Keyguards
1. Remove paper backer from Dual Lock Assembly
2. Place Dual Lock Assembly on Keyguard. (suggested locations marked with )
3. Remove paper backer from other side of Dual Lock Assembly.
4. Place Keyguard on keyboard.
*Note: For additional height of keyguard, stack Dual Lock assemblies.
98000055B 02/20 70500254B
-
1
AbleNet BigKeys LX Rigid Keyguard Quick start guide
- Type
- Quick start guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
Related papers
-
AbleNet SuperTalker Quick start guide
-
-
-
-
AbleNet Micro Light Switch Owner's manual
-
-
-
-
-
