Toshiba 14DLV75 Owner's manual

Brand: Toshiba

Model: 14DLV75

Category: DVD players

Type: Owner's manual

TOSHIBA

_ _o_ oo_-_

V ID EO _ OJGWTACA.OWOD I G I T A L

14-inch* Diagonal LCD TV/DVD

COMBINATION

Introduction

Connections

Basic setup i

TV operation

14DLV75

OWNER'S MANUAL

Basic playback

Advanced playback

Function setup

Others

Before operating the unit, please read this manual thoroughly.

*Screen size is approximate.

14/01/2005 7:42 PM

J5N00621A [El (Cover) 1

IMPORTANT SAFEGUARDS

CAUTION: TO REDUCE THE RISKOF ELECTRIC

SHOCK,DO NOT REMOVECOVER

(ORBACK). NOUSER-SERVICEABLE

PARTSINSIDE.REFER SERVICINGTC

QUALIFIEDSERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral

triangle is intended to alert the user to the presence of

uninsulated dangerous voltage within the product's

enclosure that may be of sufficient magnitude to constitute a risk

of electric shock.

The exclamation point within an equilateral triangle is intended

to alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature accompa-

nying the appliance.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN

OR MOISTURE.

CAUTION : TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN

EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE

FULLY INSERTED TO PREVENT BLADE EXPOSURE.

FCC NOTICE :

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the distance between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with

the FCC (Federal Communications Commission) Rules could void the user's authority to operate

this equipment.

WARNING: Handling the cord on this product or cords associated with accessories sold with this product will

expose you to lead, a chemical known to the State of California to cause birth defects or other

reproductive harm. Wash hands after handling.

CAUTION:

THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM.

TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE

READ THIS OWNER'S MANUAL CAREFULLY AND RETAIN

FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE

MAINTENANCE, CONTACT AN AUTHORIZED SERVICE

LOCATION.

USE OF CONTROLS, ADJUSTMENTS OR THE PERFORM-

ANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED

HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPO-

SURE.

TO PREVENT DIRECT EXPOSURETO LASER BEAM, DO NOT

TRY TO OPEN THE ENCLOSURE. VISIBLE LASER RADIA-

TION MAY BE PRESENT WHEN THE ENCLOSURE IS

OPENED. DO NOT STARE INTO BEAM.

J5NIO621A [El(P02-05)

Location of the required Marking

The rating sheet and the safety caution

are on the rear of the unit.

CERTIFICATION: COMPLIES WITH

FDA RADIATION PERFORMANCE

STANDARDS, 21 CFR SUBCHAPTER J.

14/01/2005, 7:43 PM

IMPORTANT SAFEGUARDS

1. READ INSTRUCTIONS

All the safety and operating instructions should be read before the unit is operated.

2. RETAIN INSTRUCTIONS

The safety and operating instructions should be retained for future reference.

3. HEED WARNINGS

All warnings on the unit and in the operating instructions should be adhered to.

4. FOLLOW INSTRUCTIONS

All operating and use instructions should be followed.

5. CLEANING

Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.

Use a soft dry cloth for cleaning the exterior cabinet only.

6. ATTACHMENTS

The manufacturer of this unit does not make any recommendations for attachments, as they may cause

hazards.

7. WATER AND MOISTURE

Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet

basement, or near a swimming pool. PORTABLE CART WARNING

8. ACCESSORIES (symbol provided by RETAC)

Do not place this unit on an unstable cart, stand, tripod, bracket, or table.

The unit may fall, causing serious injury, and serious damage to the unit.

8A. An appliance and cart combination should be moved with care. Quick stops,

excessive force, and uneven surfaces may cause the appliance and cart

combination to overturn.

9. VENTILATION

Slots and openings in the cabinet back or bottom are provided for ventilation,

S3126A

and to ensure reliable operation of the unit, and to protect it from overheating.

These openings must not be blocked or covered. The openings should never be blocked by placing the unit

on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat

source. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper

ventilation is provided or the manufacturer's instructions have been adhered to.

10. POWER SOURCE

This unit should be operated only from the type of power source indicated on the rating plate. If you are not

sure of the type of power supply to your home, consult your appliance dealer or local power company.

11. GROUNDING OR POLARIZATION

This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other).

This plug will fit into the power outlet only one way.This is a safety feature. Ifyou are unable to insert the plug

fully into the outlet, try reversing the plug. De not defeat the safety purpose of the grounding-type plug.

12. POWER-CORD PROTECTION

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed

upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point

where they exit from the appliance.

2-.

J5N00621A [El (P02-05) 3 _ 14/01/2005, 7:43 PM

IMPORTANT SAFEGUARDS (continued)

iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_

13. LIGHTNING

To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time,

unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the

unit due to lightning and power line surges. However, if there is thunder or lightning now, do not touch the

unit and any connected cable.

This will for you not to receive the electric shock by the serge of thunder.

14. POWER LINES

An outside antenna system should not be located in the vicinity of overhead power lines or other electric

light or power circuits, or where it can fall onto or against such power lines or circuits. When installing an

outside antenna system, extreme care should be taken to keep from touching such power lines or circuits,

as contact with them might be fatal.

15. OVERLOADING

Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.

16. OBJECT AND LIQUID ENTRY

Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short

out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.

17. OUTDOOR ANTENNA GROUNDING

If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is

grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the

National Electrical Code (NEC), ANSl/NFPA 70, provides information with respect to proper grounding of

the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of

grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and require-

ments for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING AS PER THE

NATIONAL ELECTRICAL CODE

ANTENNA LEAD IN WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21 )

GROUND CLAMPS

NEC-NATIONAL ELECTRICAL CODE POWER SERVICE GROUNDING

ELECTRODE SYSTEM

$2898A (NEC ART 250, PART H)

18. SERVICING

Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous

voltage or other hazards. Refer all servicing to qualified service personnel.

For example:

a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the unit.

c. Ifthe unit has been exposed to rain or water.

d. Ifthe unit does not operate normally by following the operating instructions. Adjust only those

controls that are covered by the operating instructions, as an improper adjustment of other controls

may result in damage and will often require extensive work by a qualified technician to restore the

unit to its normal operation.

e. Ifthe unit has been dropped or the cabinet has been damaged.

f. When the unit exhibits a distinct change in performance, this indicates a need for service.

J5N 0621A [E l (P02-05) 4 ,_. 14/01/2005, 7:43 PM

19. REPLACEMENT PARTS

When replacement parts are required, be sure the service technician uses replacement parts specified by

the manufacturer or those that have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock or other hazards.

20. SAFETY CHECK

Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to

determine that the unit is in proper operating condition.

21. HEAT

The product should be situated away from heat sources such as radiators, heat registers, stoves, or other

products (including amplifiers) that produce heat.

22. DISC SLOT

Keep your fingers well clear of the disc slot as it is closing. It may cause serious personal injury.

23. CONNECTING

When you connect the product to other equipment, turn off the power and unplug all of the equipment from

the wall outlet. Failure to do so may cause a product damage. Read the owner's manual of the other

equipment carefully and follow the instructions when making any connections.

24. HEADPHONES

When you use the headphones, keep the volume at a moderate level. If you use the headphones continu-

ously with high volume sound, it may cause hearing damage.

25. LASER BEAM

Do not look into the opening of the disc slot or ventilation opening of the product to see the source of the

laser beam. It may cause sight damage.

26. DISC

Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious

personal injury and product malfunction.

27. LCD

Do not press hard or jolt the LCD panel. It may cause the LCD panel glass to break and injury may occur.

Should the LCD panel be broken and liquid leaks out, do not inhale or swallow it. Doing so may cause

poisoning. If you have got it into your mouth, wash it out and consult your doctor. Ifyour hands or clothes

have touched it, wipe them with alcohol and a cleaning cloth and then wash them well.

28. NOTE TO CABLE TV SYSTEM INSTALLER

This reminder is provided to call the Cable TV system installer's attention to Article 820-40 of the NEC that

provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be con-

nected to the grounding system of the building, as close to the point of cable entry as practical.

2-.

ON DISPOSAL

This product contains mercury. Disposal of mercury may be regulated due to environmental

considerations. For disposal or recycling information, please contact your local authorities

or the Electronic Industrial Alliance : www.eiae.org.

J5N00621A [E] (P02-05} 5 _ 14/01/2005, 7:43 PM

• Do not shock the LCD panel. It may cause unit

damage and malfunction.

• When shipping the unit, the original shipping carton

and packing materials come in handy. For maximum

protection, repack the unit as it was originally packed

at the factory.

• Do not use volatile liquids, such as insect spray, near

the unit. Do not leave rubber or plastic products to

contact the unit for prolonged period. They will leave

marks on the finish.

• The top and rear panels of the unit may become warm

after a long period of use. This is not a malfunction.

• When the unit is not in use, be sure to remove the

disc and turn off the power.

• If you do not use the unit for a long period, the unit

may not function properly in the future. Turn on and

use the unit occasionally.

• Place the unit on a level surface. Do not use it on a

shaky or unstable surface such as a wobbling table or

inclined stand. The loaded disc may become dis-

aligned and damage the unit.

• When you place this unit near a TV, radio, or VCR, the

playback picture may become poor and the sound

may be distorted. In this case, place the unit away

from the TV, radio, or VCR.

• To avoid damage to this product, never place or store

the unit in direct sunlight; hot, humid areas; or areas

subject to excessive dust or vibration.

Moisture condensation damages the unit. Please

read the following carefully.

Moisture condensation occurs, for example, when you

pour a cold drink into a glass on a warm day. Drops of

water form on the outside of the glass. In the same way,

moisture may condense on the optical pick-up lens

inside this unit, one of the most crucial internal parts of

the unit.

Moisture condensation occurs during the

following cases.

When you bring the unit directly from a cold place to

a warm place.

When you use the unit in a room where you just

turned on the heater, or a place where the cold wind

from the air conditioner directly hits the unit.

In summer, when you use the unit in a hot and humid

place just after you move the unit from an air

conditioned room.

When you use the unit in a humid place.

Use a soft, dry cloth for cleaning.

• Do not use any type of solvent, such as thinner and

benzine, as they may damage the surface of the unit.

• If you use a chemical saturated cloth to clean the unit,

follow that product's instructions.

• The color LCD is manufactured using extremely high

precision technology, but even so may include certain

pixels that do not operate properly (that do not light,

that remain lit constantly, etc.). We do our best to

keep the number of these defective pixels to a

minimum, but please understand that they cannot be

completely eliminated even with the most advanced

manufacturing technologies available today.

• The fluorescent tube which illuminates the panel from

the inside will deteriorate with use. When the LCD

becomes dim, flickers, or does not illuminate, contact

your dealer for replacement.

• The brightness of the LCD monitor differs slightly

depending on the viewing angles. Adjust the angle to

obtain the best viewing. (The recommended angle is

90 degrees to the monitor.)

J5NIO621A [E] (P06-07) 6

• Do not use the unit when moisture condensation

may occur.

If you use the unit in such a situation, it may damage

discs and internal parts. Remove the disc, connect

the power cord of the unit to the wall outlet, turn on

the unit, and leave it for two or three hours. After two

or three hours, the unit will have warmed up and

evaporated any moisture. Keep the unit connected to

the wall outlet and moisture condensation will seldom

occur.

Wall outlet

14/01/2005, 7:43 PM

on discs

[onl "ngi i ii::: i:i:ii:]

• Do not touch the playback side of the disc.

For example, handle the disc so that it is shown in

figure below.

Playback side

• Do not attach paper or tape to discs.

DO NOT

• Fingerprints and dust on the disc cause picture and

sound deterioration. Wipe the disc from the center

outwards with a soft cloth. Always keep the disc

clean.

DO NOT

• Do not use any type of solvent such as thinner,

benzine, commercially available cleaners or antistatic

spray for vinyl LPs. It may damage the disc.

• Do not store discs in a place subject to direct sunlight

or near heat sources.

• Do not store discs in places subject to moisture and

dust such as a bathroom or near a humidifier.

• Store discs vertically in a case. Stacking or placing

objects on discs outside of their case may cause

warping.

[ Structure of disc content s 1

Normally, DVD video discs are divided into titles, and

the titles are sub-divided into chapters. Video CDs and

Audio CDs are divided into tracks.

DVD video disc

Title 1 ' I ' Title 2

Chapter1 Chapter2 I Chapter1 Cha_ter2 Chapter_:

Video CD/Audio CD

' Video CD/Audio CD

Traik 1 Traik 2 Traik 3 Traik 4 Track 5I

Each title, chapter or track is assigned a number, which

is called "title number", "chapter number" or "track

number" respectively.

There may be discs that do not have these numbers.

The unauthorized recording, use, distribution, or

revision of copyrighted materials including, without

limitation, television programs, videotapes, and DVDs, is

prohibited under the Copyright Laws of the United

States and other countries, and may subject you to civil

and criminal liability.

This product incorporates copyright protection

technology that is protected by U.S. patents and other

intellectual property rights. Use of this copyright

protection technology must be authorized by

Macrovision, and is intended for home and other limited

viewing uses only unless otherwise authorized by

Macrovision. Reverse engineering or disassembly is

prohibited.

J5N00621A [E] (P06-07) 7 _ 14/01/2005, 7:43 PM

on discs (continued)

This owner's manual explains the basic instructions of

this unit. Some DVD video discs are produced in a

manner that allows specific or limited operation during

playback. As such, the unit may not respond to all

operating commands. This is not a defect in the unit.

Refer to instruction notes of discs.

",_" may appear on the TV screen during operation.

A_',_'' means that the operation is not permitted by the

unit or the disc.

For example, sometimes it is unable to stop the

playback of copyright message of the disc when the

STOP (I) button is pressed. Alternatively, the "_" may

also indicate that the feature is not available for the disc.

The region number of this unit is 1. If region numbers,

which stand for their playable area, are printed on your

DVD video disc and you do not find ['_ or _], disc

playback will not be allowed by the p_-yer. (In this case,

the unit will display a message on-screen.)

Some DVDs that have no region code label may still be

subject to area restrictions and therefore not playable.

This DVD supports Video CDs equipped with the PBC

(Version 2.0) function. (PBC is the abbreviation of

Playback Control.) You can enjoy two playback

variations depending on types of discs.

• Video CD not equipped with PBC function

(Version 1.1)

Sound and movie can be played on this DVD in the

same way as an audio CD.

• Video CD equipped with PBC function

(Version 2.0)

In addition to operation of a Video CD not equipped

with the PBC function, you can enjoy playback of

interactive software with search function by using the

menu displayed on the TV screen (Menu Playback).

Some of the functions described in this owner's

manual may not work with some discs.

J5NI0681A TEl(P08-13)

This unit can play the following discs.

Disc Maximum

Disc Mark Contents Size playback time

Approx. 4 hours

(single sided disc)

12 cm

Audio Approx. 8 hours

DVD _ + (double sided disc)

v I D E O Video

video (moving

discs _ pictures) Approx. 80 minutes

(single sided disc)

8 cm

Approx. 160 minutes

(double sided disc)

Audio

Video Video

CDs

[DIGITALVIDEO] (moving

pictures)

12 cm Approx. 74 minutes

8 cm Approx. 20 minutes

12cm Approx.74minutes

Audio [_] _]o_

CDs Audio 8 cm

DIGITAL AUDIO

(CD Approx.20minutes

single)

The following discs are also available.

• DVD-R/RW discs of DVD video format

• CD-R/CD-RW discs of CD-DA, Video CD, MP3, WMA

or JPEG format

• Kodak Picture CD and FUJICOLOR CD format

Some of these discs may be incompatible.

When you play an 8 cm disc, you need the adapter

(not supplied).

You cannot play discs other than those listed above.

You cannot play discs of DVD-RAM, DVD-ROM, Photo

CD, etc., or non standardized discs even if they may

be labeled as above.

Some CD-R/RWs cannot be played back depending

on the recording conditions.

This unit uses the NTSC color system, and cannot

play DVD video discs recorded in any other color

system (PAL, SECAM, etc.).

Because of problems and errors that can occur during the

creation of DVD software and/or the manufacture of DVD

discs, Toshiba cannot guarantee that the DVD player

contained in the unit will play every feature of every DVD

bearing the DVD logo. As one of the creators of DVD

technology, Toshiba DVD players are manufactured using

the highest standards of quality, and as a result, such

incompatibilities are rare. If you happen to experience any

difficulty playing a DVD in this unit, please feel free to call

our Call Center (see page 53).

15/01/2005, 10:50 AM

Introduction

IMPORTANT SAFEGUARDS ............................ 2

Precautions ....................................................... 6

Notes on discs ................................................... 7

Contents ............................................................ 9

Identification of controls .................................. 10

Connections

Antenna connections ....................................... 14

Cable TV connections ..................................... 15

Connecting to optional equipment ................... 16

Power source .................................................. 20

Basic setup

Setting the language ....................................... 21

To memorize channels .................................... 22

TV operation

TV operation .................................................... 23

Closed captions ............................................... 25

Setting the V-Chip ........................................... 26

Picture control adjustment ............................... 28

Adjusting the picture preference ..................... 28

Selecting the color temperature ...................... 29

Sound control adjustment ............................... 30

Stereo and Second Audio Program (SAP) ...... 30

Basic playback

Playing a disc .................................................. 31

Advanced playback

Zooming ......................................................... 34

Locating desired scene .................................. 34

Repeat playback ............................................ 35

A-B Repeat playback ..................................... 35

Program playback .......................................... 36

Random playback .......................................... 36

Changing angles ............................................ 37

Title selection ................................................. 37

DVD menu ...................................................... 37

Changing soundtrack language ..................... 38

Subtitles ......................................................... 38

Karaoke playback ........................................... 39

Disc status ...................................................... 39

To turnoff the PBC ........................................ 39

MP3/WMA/JPEG CD operation ..................... 40

Function setup

Customizing the function settings .................. 43

Temporary disabling of rating level

by DVD disc ................................................... 46

Others

Language code list ......................................... 47

Troubleshooting ............................................. 48

Reception disturbances .................................. 50

Specifications ................................................. 51

Limited United States Warranty ..................... 52

J5N00621A [E] (P08-13} 9 _ 14/01/2005, 7:43 PM

_iii_i_i_i_',_'_,_ " " "

_:_ntificatwn of controls

See the page in [_ for details.

VOLUME (-/+) buttons [_ SKIP (I,I_1/I,t,I) buttons [_

CHANNEL (V/A) buttons [_ STOP(l) button [_

PLAY (I,,) button [_

÷ ÷

POWER indicator

Remote sensor

10 _ 14/01/2005, 7:43 PM

Left Side Right Side

Adjusting the angle of the base

APF

Approx. 5°

You can adjust the

angle of the

TV-screen for 5°

forward or for 15°

backward from

vertical angle.

Hold the base of the

TV while adjusting

the angle.

2-.

COAXIAL DIGITAL AUDIO OUT jack

Antenna jack

DC input jack

LV COLIIoMPONENTVIDEO IN

(Y, PdCs, PdCR) acks

S-VIDEO (LINE 1 IN) jack

VIDEO IN/AUDIO IN (L/R) (LINE 1 IN) jacks

J5N00621A [E] (P08-13) 11 _ 14/01/2005, 7:43 PM

of controls (continued)

The instructions in this manual describe the function on the remote control. See the page in [_ for details.

EJECT button [_

TV/DVD button [_

Direct channel selection

buttons (0-9) [_

Numbered buttons (0-9) [_

RECALL button [_

JUMP button [_ --

INPUT SELECT button [_

PLAY MODE button [_

GAME button [_

TOP MENU button [_ --

MENU button [_

SETUP button [_

PLAY button [_

STOP button [_ --

SKIP buttons [_

REV button [_

FWD button [_

SLOW buttons [_

ANGLE button [_ --

AUDIO button [_

TOP MENU DVD MENU

SLOW SLOW REPEAT A-B CAPTION

ANGLE AUDIO SUBTITLE

TOSHIBA

DC-LB1

POWER button [_

SLEEP button [_

CH RTN button

ZOOM button [_

-- MUTE button [_

VOL +/- buttons[_

-- CANCEL button [_

-- *DVD MENU button[_

Direction buttons (A / ,_/ _ / l,)[_

-- CH +/- buttons [_

-- ENTER button [_

-- RETURN button [_

-- PAUSE button [_

-- CLOSED CAPTION button [_

REPEAT A-B button [_

SUBTITLE button [_

*DVD MENU button

Use the DVD MENU button to

display the menu included on

many DVD video discs.

To operate a menu, follow the

instructions in "DVD menu."

L. j

12 _ 14/01/2005, 7:43 PM U

Open the battery compartment _ Install two "R03/AAA" batteries _ Replace the compartment

cover in the direction of the (supplied), paying attention to cover.

arrow, the polarity indicated in the

battery compartment.

• Aim the remote control at the remote sensor and press control buttons to operate.

• Operate the remote control within 30° angle on either side of the remote sensor, up to a distance of approx. 5

meters.

/ i 4-

/' I \\

/' 30 I 30 \\\

Approx. 5 meters

Caution:

• Never throw batteries into a fire.

Notes:

• Be sure to use AAA size batteries.

• Dispose of batteries in a designated disposal area.

• Attention should be drawn to the environmental aspects of battery disposal.

• Do not mix different battery types or combine used batteries with new ones.

• Ifthe remote control does not operate correctly, or if the operating range becomes reduced, replace both

batteries with new ones.

• Ifthe batteries are dead or if you will not be using the remote control for a long time, remove the batteries to

prevent battery acid from leaking into the battery compartment.

J5N00621A [El (P08-13} 13 _ 14/01/2005, 7:43 PM

;:,: tenna connections

Ifyou are using an indoor or outdoor antenna, follow the instructions below thatcorrespond toyour antenna system. If

you are using a cable TVservice (CABLE), see page 15for CableTV connections.

Antenna Antenna

jack jack

75 ohm coaxial cable

(not supplied)

300-75 ohm matching

transformer (supplied)

Connect the 75 ohm cable from the combination

VHF/UHF antenna to the antenna jack on the back

of the TV/DVD.

If your combination VHF/UHF antenna has a 300

ohm twin-lead wire, use the 300-75 ohm matching

transformer.

Antenna

jack 300-75 ohm matching

transformer (supplied)

_n°°tb_p;r'_ edT __

tUw_L13e0 _'_ Vw_F_13eO0°hirm

(not supplied) (not supplied)

Connect the UHF 300 ohm twin-lead wire to the

combiner (not supplied). Connect the VHF 300

ohm twin-lead wire to the 300-75 ohm matching

transformer. Attach the transformer to the combiner,

then attach the combiner to the antenna jack on the

back of the TV/DVD.

Antenna

jack

twinqead wire

(not supplied)

Connect the VHF 75 ohm cable and UHF 300 ohm

twin-lead wire to the combiner (not supplied).

Attach the combiner to the antenna jack on the back

of the TV/DVD.

14/01/2005, 7:43 PM

ble TV connections

This TV/DVD has an extended tuning rangeand can tune most cable channels without using aCable TV converter box.

Some cable companies offer "premium pay channels" in which the signal isscrambled. Descrambling thesesignals for

normal viewing requires the use of a descrambler device which is generally provided by the cable company.

Antenna

jack

75 ohm

coaxial cable

For basic cable service not requiring a converter/descrambler

box, connect the Cable TV 75 ohm coaxial cable directly to the

Antenna jack on the back of the TV/DVD.

_°.2,.

If you subscribe to a cable TV service which requires the use of a converter/descrambler box, connect the

incoming 75 ohm coaxial cable to the converter/descrambler box. Using another 75 ohm coaxial cable, connect

the output jack of the converter/descrambler box to the antenna jack on the TV/DVD. Follow the connections

shown below. Set the TV/DVD to the output channel of the converter/descrambler box (usually channel 3 or 4)

and use the converter/descrambler box to select channels.

÷ Incoming Antenna

75 ohm 75 ohm cable to jack

Cable TV I Converter/ I TV/DVD

descrambler

If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the

use of aconverter/descrambler box, you may wish to use a signal splitter and an A/B Switch box (available from the

cable company or an electronics supply store). Follow the connections shown below. With the switch in the "B"

position, you can directly tune any nonscrambled channels on your TV/DVD. With the switch in the "A" position, tune

your TV/DVD to the output of the converter/descrambler box (usually channel 3 or 4) and use the converter/

descrambler box to tune scrambled channels.

_Sp Converter/

Incoming descrambler Antenna

75 ohm 75 ohm cable jack

Cable TV to TV/DVD

:- litter A/B switch P

J5N00621A [E] (P14-25) 15 _ 14/01/2005, 7:43 PM

to optional equipment

You can enjoy VCR, camcorder or TM game with connection to external

input.

The unauthorized recording, use, distibution,

or revision oftelevision programs, videotapes,

DVDs, and other materials is prohibited under

the Copyright Laws of the United States and

other countries, and may subject you to civil

and criminal liability.

Press INPUT SELECT repeatedly to select the desired mode.

"LINE1", "LINE2", "GAME", "COMPONENT" or TV channel will display on the screen for 4 seconds.

Note: In the DVD mode this key will not operate

To playback from the VCR, connect the VCR to the TV/DVD as shown.

Select the "LINE2" by pressing INPUT SELECT repeatedly. Left side (LINE 2 IN)

4: Signal flow / h (red) _ _:_]_[_ The LINE l IN

_1 I VCR (white) \ _ I _ ]l_ terminalscanbeused /

t t t To AudioNideo/OUT (yellOW)r_,._ _I(_ _4 in the same way. j

AudioNidee cable (not supplied) I Tel ( ) DEO IN

Note: Picture might be muted for some VCR playback. This is not a malfunction of this unit.

To playback from the camcorder, connect the camcorder to the TV/DVD as shown.

Select the "LINE2" by pressing INPUT SELECT repeatedly.

Left side (LINE 2 IN) 1

: Signal flow Camcorder (red) _ [ _===_1_

(white) \_ / I_l_ _ The LINE IIN

f f f To AudioNideo OUT (yellow)v') \"_> i _[_l_ "L.terminalscanbeused

[_= _ ill the same way.

Audio/Video cable (not supplied) [ To AUDIO(L/R)/VlDEO IN

You can enjoy playing a TV game on the screen by adjusting to suitable brightness for your eyes.

1. Connect a TV Game to the TV/DVD.

2. Select the "GAME" by pressing INPUT SELECT repeatedly or simply press GAME.

The GAME mode screen appears.

• This TV/DVD has the GAME mode function (see page 24).

_ :Signalfl°w I TVGAME I

_' _' _' To AudioNideo OUT

Notes:

Audio/Video cable (not supplied)

Left side (LINE 2 IN)

(red) _

(white) _ {Q[_

<ye,,ow>

- : 11

To AUDIO(L/R)NIDEO IN

Only the LINE 2 IN

terminals can be

used with the

GAME mode.

• You can also change the TV screen to the desired mode by pressing the CH +/- buttons.

• The TV/DVD can also be used as a display device for many video games. However, due to the wide variety of different types of signal

generated by these devices and subsequent hook-up variations required, they have not all been included in the suggested connection

diagrams. You'll need to consult each component's Owner's Manual for additional information.

• Interactive video games that involve shooting a "gun" type of joystick at on-screen target may not work on this TV/DVD.

J5N 0621A [El (P14-25) 16 ,_. 14/01/2005, 7:43 PM

The unauthorized recording, use, distibution,

or revision oftelevision programs, videotapes,

DVDs, and other materials is prohibited under

the Copyright Laws of the United States and

other countries, and may subject you to civil

andcriminal liability.

Connecting to an optional equipment with S-video output

If you connect a VCR with an S-VIDEO cable to the S-VIDEO IN jack on the rear lower left of the TV/DVD, you

must also connect the audio cables to the AUDIO IN jacks on the rear lower left of the TV/DVD (LINE 1 IN). The

S-VIDEO cable only carries the video signal. The audio signal is separate.

Select the "LINE1" by pressing INPUT SELECT repeatedly.

Ex. VCR with S-Video

_ : Signal fi°w [/[_1 I _] (playback)

To S-VIDEO OUT

Rear lower left of the TV

/ ott?ooo/

To Audio (L/R) OUT To AUDIO (L/R) IN _r _ @ To S-VIDEO IN

Audio cable (not supplied)

S-Video cable (not supplied)

Note: When the S-VIDEO cable and the standard video cable are connected at the same time, the S-video cable takes precedence.

2-.

Your TV/DVD is capable of using ColorStream (component video). Connecting your TV/DVD to a component

video compatible DVD player, such as a Toshiba DVD player with ColorStream ®can greatly enhance picture

quality and performance.

Ex. DVD player with Component video

_ : Signal fl°w ['_o........ _)

To Component _ _ _ To Audio OUT

Video OUT Audio cable (not supplied)

_ Component video cable (not supplied)

Rear lower left of the TV

To AUDIO (L/R) IN _l_ _ To COMPONENT

(Y, PdCB, PR/C@ IN

• Selecting Component input mode

Press INPUT SELECT repeatedly to

select "COMPONENT" mode.

When using the Component video cable

an Audio cable must be connected to

AUDIO IN (L/R) (LINE 1 IN) jacks.

The ColorStream ® inputs on this unit are for use with devices that output 480i interlaced signals and 480p progressive signals. This

unit will not accept or display 720p progressive scan signals or 1080i interlaced high-definition signals. If you connect a high-

definition set-top receiver, 720p progressive scan DVD player, or other similar device to the unit's ColorStream ® inputs, YOU MUST

SWITCH THE DEVICE'S OUTPUT TO 480i INTERLACED OR 480p PROGRESSIVE MODE FIRST. Failure to do this will cause a

poor or no picture to display. J

Notes:

• Refer to the owner's manual of the connected equipment as well.

• When you connect the unit to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet

before making any connections.

• If you place the unit near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the unit away from the

tuner and radio.

J5N00621A [El (P14-25} 17 _ 14/01/2005, 7:43 PM

to optional equipment (continued)

You can enjoy high quality dynamic sounds by connecting the * This section uses the following reference mark.

TV/DVD to optional audio equipment.

Front speaker D : Center speaker

[] Rear speaker _ : Signal flow

[] Sub woofer

Dolby Digital

Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to

reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs encoded via the

Dolby Digital recording system with this dynamic realistic sound by connecting the TV/DVD to a 6 channel amplifier

equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Surround Pro Logic decoder, you will

obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1 -channel Dolby Digital soundtracks, as

well as from titles with the Dolby Surround mark.

Amplifier equipped with q

Dolby Digital decoder ]

To COAXIAL L,

type digital

audio input

To COAXIAL DIGITAL ¢h

AUDIO OUT

75 _2 coaxial cable (not supplied)

Rear lower right of the TV

"Manufactured under license

from Dolby Laboratories.

"Dolby", "Pro Logic", and the

double-D symbol are trade-

marks of Dolby Laboratories.

Dolby Surround Pro Logic

You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an amplifier and speaker system (right

and left front speakers, a center speaker, and one or two rear speakers).

• With an amplifier equipped with a Dolby Digital

Connect the equipment the same way as described in "Connecting to an amplifier equipped with a Dolby Digital decoder."

Refer to that amplifier's owner's manual and set the amplifier so you can enjoy Dolby Surround Pro Logic sound.

• With an amplifier not equipped with a Dolby Digital

Connect the equipment as follows.

• This connection is only suitable for Video CDs and Audio CDs.

Amplifier equipped with a

Do by Surround Pro Log c

To COAXIAL L_

type digital

audio input

75 _) coaxial cable (not supplied)

To COAXIAL DIGITAL

AUDIO OUT

Rear lower right of the TV

* Connect one or two rear speak-

l ers. The output sound from the

rear speakers will be monaural

even if you connect two rear

speakers.

Digital Theater Systems (DTS)

DTS is a high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs.

If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS encoded sound tracks on DVD

video discs or audio CDs.

with"_[ Rear lower right of the TV

Arnplifier equipped

a DTS decoder / _ O [_

D L ToOOAXIALDIGITAL_ "

typeaudiodigitalinput AUDIO OUT "_ "DTS" and "DTS Digital Out"1

75 £2coaxial cable (not supplied) | are trademarks of Digital|

Theater Systems, Inc. J

14/01/2005, 7:43 PM

MPEG2 sound

You can enjoy motion picture and live concert DVD video discs encoded via the MPEG2 recording system with dynamic

realistic sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor.

_//_ --_,mplifierequipped with aqMPEG2 audio decoder]-- Rear lower right of the__ ....O D 1TV

D ToCOAXlALL

type digital To COAXIAL DIGITAL "

audio input AUDIO OUT

;75 _ coaxial cable (not supplied)

2 channel digital stereo

You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input

and speaker system (right and left front speakers).

Note: PCM audio is limited to DVD or CD playback.

,_Amplifier _'I Rear lower right of the TV

_1 L Digitalequippedaudioinputwith aI| _'_O ......

I ToCOAXlAL a

I type digital i To COAXIAL DIGITAL i

A I audio input / AUDIO OUT l

I, .$5 _ coaxialcable(notsupplied)

Notes:

• DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the AC-3 RF input of a Dolby Digital Receiver.

This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO

OUT jack of the TV/DVD.

• Connect the COAXIAL DIGITAL AUDIO OUT jack of the TV/DVD to the "COAXlAIJ' input of a Receiver or Processor.

• Refer to the owner's manual of the connected equipment as well.

• When you connect the TV/DVD to other equipment, be sure to turn off the power and unplug all of the equipment from the

wall outlet before making any connections.

• The output sound of the TV/DVD has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate

listening level. Otherwise, the speakers and your hearing may be damaged by a sudden high volume sound.

• Turn off the amplifier before you connect or disconnect the TV/DVD's power cord. If you leave the amplifier power on, the

speakers may be damaged.

J5N00621A [El (P14-25) 19 _ 14/01/2005, 7:43 PM

source

ggggggOODDggggggggggOODDggggggggggOODgggggggggggOODgggggg

input jack _

AC adapter

(supplied)

AC 120V,

60Hz

AC cord

(supplied)

TO USE AC POWER

1. Connect the AC cord to the AC adapter.

2. Connect the AC adapter plug into the TV/DVD's DC input jack.

3. Connect the AC cord into a wall outlet.

Notes:

• Make sure to insert the plug of each cord securely.

• During use the AC adapter becomes warm.This is not a

malfunction.

WARNING:

• DO NOT CONNECT THIS UNiT TO THE POWER USING

ANY DEVICE OTHER THAN THE SUPPLIED AC ADAPTER

OR POWER CORD. THiS COULD CAUSE FIRE, ELECTRIC

SHOCK, OR DAMAGE.

• DO NOT USE WITH A VOLTAGE OTHER THAN THE

POWER VOLTAGE DISPLAYED. THiS COULD CAUSE

FIRE, ELECTRIC SHOCK, OR DAMAGE.

CAUTION:

• DO NOT USETHE AC ADAPTER IF IT IS COVERED BY A

CLOTH ETC., OR PRESSED INTO A NARROW AREA.

THIS RESULTS IN POOR DiSSIPATiON OF HEAT AND

MAY CAUSE FIRE, ELECTRIC SHOCK, OR DAMAGE.

• WHEN THIS UNIT IS NOT USED FOR A LONG TIME,

(E.G., AWAY ON ATRIP) IN THE iNTEREST OF SAFETY,

BE SURE TO UNPLUG IT FROM THE WALL OUTLET.

• DO NOT PLUG/UNPLUG THE PLUG WHEN YOUR HANDS

ARE WET. THIS MAY CAUSE ELECTRIC SHOCK.

• IF YOU NEED TO REPLACE THE SUPPLIED AC

ADAPTER OR AC CORD, THE SPECIFIED AC ADAPTER

AND AC CORD MUST BE USED. CONTACT THE DEALER

THATYOU PURCHASED THE UNIT FROM.

20 . 14/01/2005, 7:43 PM

Page is loading ...

Toshiba 14DLV75 Owner's manual

Brand: Toshiba

Model: 14DLV75

Category: DVD players

Type: Owner's manual

Download PDF

report

Toshiba 14DLV75 Owner's manual

Toshiba 14DLV75 Owner's manual

Related papers

Other documents