Goldstar WG5005 Owner's manual

Type
Owner's manual

This manual is also suitable for

OWNER'S MANUAL
MANUAL DEL PROPIETARIO
@_
@
I I
I
Models/Modelo WG5005, WG5005R
@
after
para eifuturo
FOR YOUR RECORDS
Write the rnc_e_ and _r_l num_ here:
IMPel #
Seria_ #
IYou _n f_nd the numbers on a label on the side d the
pr_uct.
IDeale:s Name
Date Purcha_d
I Staple your r_eipt to this _ge in the event you n_d it
to prove d,a_eof purchase c_ for warranty issues.
READ THIS MANUAL
Ihnside you willlfind many Ihe_pful hin[s on h_ to ,u_ and
mainl_ain your air condi_oner _operlly. Just ia li_e prevenl_ive
_re on your part can save you a grit deal of time and
money over the life of 'your air c®di[io_r.
"_'o,L_l[find many answers to c_mon problems in t_ chart
of troub4es,hootir_ tips. _fyou review our chart of
Troubleshooting Tips first, you may not n_d to ca[i for
service a| all,
PRECAUTION
Conta_ an Auth,orized Service Center for re_ir or
maintenance of this unit. Ca_l !_06-243-0000 to
locate the nearest AS.C.
* The air conditioner is not intend_ for use by young
chil.dren or invalids w_tho.ut supe_is_on_
, Young childre_ should _ supewi_d to ensure that
they do not play with the. air cond_io.ner.
, If the power cord requires r,ep|_cement, have _n
A_thonzed Servicer install an exact replacement pa_.
Ins_||_ion work m_st be _rformed in accordance
with the. Nationa| Electric Code. by qualified and
a_tho_zed personnel only.
....
2 Room A_F Conditioner
Safety Precautions
To prevent injury to the user or other people and propeAy damage, the fo,liowing ins_uctions
must b,e followed.
[] incorrect operation due to ignoring hstructions will cause harm or damage. The seriousness.
iis cla_ifi_ by the following indications.
[] Because d the weight d the pr_uct, it is re_immended that you have a helper to assist in
the installation.
[] Meanings of syrnbo,Js used iin this n_nual are as s.ho_ _1o,¢¢.
Be sure not to d
.... --"
Be sure to, follow i
[] Installation
"Improper assemb4y or installation may _use
incorrect o_ration, including injury, fire, and
el_tric sho_ ha_rds.
it may cause exp,iosio,n or fire.
* It may cau_ fire and electric sh_k
* lit may cau_ electdc sh_k and failure.
Owner's Manua/ 3
Safety Precautions
[] Operation
Otherwise, it wil[I _use
electriic shock or fire.
_twill cause el_txic shock or
fire.
* Othe_¢is, e it:will cause fire
and e_ectdc shock accident.
litwill cause el_tric sho_ or * it will cau_ electdc shock or
fire. fire.
, It wili cause ,el_tric sho_ or
fire.
No, grounding may cause
electric sho_.
It may cause fire and electric It may _use electric shock.
shock.,
4 R_m Air Conditioner
Safety Precautio#,s
The air _ndifloner must be operated in
a enclosed area to be most effective.
it wilt cause el_tric sh_k or failure of
machine.
m In aiiation
*They are sharp and may
cause injury,
,. lit may cau_ explosion, fire,and burn.
Water may enter the unit .and d_rage Me
insulation.it may cau_ an el_ric sh_k.
CAUTION
'mlitmay cause failure of appliance IIfthe. outer use is damag_i,
,
or peffo_,ance detenorate.
r
/
I
/
it must _ repair_ or
repUa_d imm_iatelly.
Leaving it damag_ _uld
res.u_tin the ai r _n,ditioner
fallling out of the window,
creating a _fety hazard,
Owner's Manual ,5
Safety Precautions
, it may cause iniury.
[] Operation
it may cause electric shock
and damage.
It will waste power consumptiion
in vain and it may cause accident.
ewes
o Since the fan ro._tes .at high o Thiis _,uld injury the pet or
s_ during o_r.ation, it may pi.anL
cause injury.
" It is an .air conditioner, not .a
pr_ision refrigeration system.
* O_r,ati,on without filters will
cau_ failure.
The ap_ara.nce of the air
conditioner may deteriorate_
change coior, or d_eiop
It is not sanitary .and could
cause ii_lnessor _rsonal
injury hazard,,
.6 Room Air Conditioner
Before Operadon
i Plug in the power cord properly.
2. Use a dedicat_ circuit. Overloading the line could create a fire hazard.
3. Do not use an extension cord. See page 10 for more detaills.
4. Do not start/stop operation by plugging/unp!ugging the _wer cord.
5. If the power cord is damaged and r_uires replacement, have an Authorized
Servicer install an exact replacement part.
t. Being exposed to, direct airflow for an extend_ period of time could be
hazardous to your health, Do not expose occupants, pets, o,r plants to direct
aidow for extended periodlsi of time.
2. Due to the _ssibility d oxygen ddiciency, ventilate the room when used
together with stoves or other heating devices.
3, Do not use this air conditioner for non-specified sp_ia! purposes (e,g,
preserving pr_ision devices, food, pets, plants, and art objects). Such usage
could damage the items.
4. The air _nditioner is a consumer ,comfort appliance, not a precision climate
control system.
i. Do not touch the metal parts of the unit when removing the filter. Injuries can
occur when handling sharp metal edges.
2. Do not use water to clean inside the air conditioner. Exposure to water can
destroy the insulation, leading to possible elec_-ic shock,
3. When cleaning the unit, first make sure that the power and breaker are turned
off. The fan rotates at a very high speed during operation. There is a
possibility of injury if the unit's _wer is a_i,dentally triggered on while
cleaning inner parts d the unit,
For repair and maintenance, _ntact an A uthoriz_ Service Center. See the
warranty page for details or call (8,00) 243-0000. Have your model number and
serial number available. They should be wri_en on page 2 of this manual.
Owner's Manual 7
introduction
This symbol ale,s you to the risk of electric shock.
This symbol aleds you to hazards that could cau_ harm to the
air conditioner.
This symbol indicates s_cial notes.
:: iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii:
WARNING: This appliance should be installed in accordance with the
National Electric Code.
CABINET
KNOB
HORIZONTAL
,AiR DEFLECTOR
i: FRON_",GRILLE
COOL AIR DISCHARGE
CABINET
CONiT_L BOARD
AIR FILTER
HORIZONTAL
A_R DEFLECTOR
FRONT 'GRILLE
Remote oontrolfe, r_
COOL AIR D]_HARGE
8 R_m Air Co,nditioner
Ete,ctr_cel Safety
115V~
J
I
Power cord may include a current
interrupter device A test and reset button is
pro,vided on the plug case. The device,
should be tested on a periodic basis by 'firs1
pressing the TEST button and then the
RESET button. If the TEST butten does not
trip or # the RESET button wi_linot s_y
engage& discontinue use d the air
conditioner and @ntact a qualified sewi_,
technician.
Use Wail Receptacle Power Supply
Siandard 125V 3.owiregrounding
_eceptacle rated 15A, 125V AC U_ 15 AMP_ t_me
delay fu_ or 15 AMP,
_ c_r'eu_t breaker,
S_andard 2£_)V, 3,,,,,w_ grounding
re_p_clle, rated 15A, 2:50V AC
Use 20 AMP, t_lime
,delay fu_ or _, AMP,
,circuit b,rea_r,
S_andard 250V, 3,o,W_rOgrounding
re_ptacle rat:ed 2CA, 250V AC
ELECTRICAL SAFETY
IMPORTANT G'_'UNDING INSTRUCTIONS
Air conditioner has a three-prong grounding plug on
its _wer supply cord, which must be plug_d into
propedy grounded threeoprong wall receptacle for
'your pro,tection against p_siNe shock hazard.
Use, of extensioin cords,
B_ause d po,tentia_safety hazards,iwe
strongly discourage tihe use of an extension
cord Ho_ever, if you wish _ouse an
extension co,rd, use a CSA cert_ed/UL-listed
3-wire (grounding) exlension cold0 rated t5A,
125V.
All wiring should _ made iinaccordance with
I_,al electrical codes and r_ulations.
Numinum house wMng may i_se special
proNems. Consult a qu.a_ifiedel_[dcian.
23& 208, and 2301208_LT UNITS
These units are equipp_ with a th_-prorig
grounding plug on the power suipp_,co,rd, w!hich
must _ p_ugged into a matching propedy grounded
threeoprong wal_re_ptade for your proted:Jon
against pessiNe shock hazard If such an outlet is
not p,resenL one must &9 installed by a qualified
ellectrician in ac£ordance wilh the National IE[edrical
Code .and_oca!d._d_ and erdinances.
DO NOT USE AN EXTENSION CORD o,n230,
208, and 230/208 Voit units,
Owner's _eual 9
Electrical Safety
WARNING: This appliance must be properly grounded.
The power cord of this appliance is equipped with a threeoprong grounding plug.
To minimize the risk of electric shock, use the plug with a standard three-slot
grounding wall power outlet. If the power outlet does not include a grounding slot,
have a qualified electrician replace the outlet before you use the room air
conditioner,
WARNING: Changing the outlet without making the appropriate wiring
changes will create an unsafe condition that could result in fire or
el_trica! shock, Refer all such work to a !icens_ and qualifi_
Preferred method
Ensure proper ground
exists _fote u_
Do not cut or remove the grounding prong from the _wer
Attaching the adapter ground terminal to the wall
receptacle cover screw does not ground the appliance unless the
cover scr_ is metal and not insulated, and the wall receptacle is
grounded through the Ihouse wiring.
If you Ihave any doubt whether the air conditioner isi
properly ground_, have the wall r_eptacle and circuit ch_k_ by a
qualified electrician.
10 Room Air Co,ndifioner
Electd,_lSafety
We strongly discourage the use of an adapter due to potential safety hazards.
For temporary connections, use only a UIL°]isted adapter, available from most:
local hardware stores. Ensure that the large sliot in the adapter is aligned with
the large slot in the receptacle for a proper polarity connection.
To disconnect the power cord from the adapter, use one hand on each to avoid
damaging the ground terminal. Avoid frequently unplugging the power cord as
this can lead to eventual ground terminal damage.
Tem_taty method
Adapter Plug.._
Receplacl_
Metal Screw
Never use the appliance with a broken adapter,
We strongly discourage the use of an extension cord due, to potential safety
hazards. For temporary situations, use only CSA certified and UL listed 3-wire
grounded extension cords, rated 15 A, 125 V.
Owner's Manual 11
Instafla#on
TypeA: 14 EA Type B:2 lEA Type C: 2 EA TyL_ D: 3 EA
(ShortScrew} (WoadScrew) (L Bracket')
E
E
....lype E: 1 EA Type F: 1 EA Type G: 2 EA Fype H: 1 EA
(Seal Strip} (Guide Panel}
(M_sive _cked) (Netad_sive backed)
Have the fo,llc_wingtools available for installation:
* Screwdriver (Slotted and Phillips) * Ruler
* Knife * Hammer
* Pencil * Level
This r_m air _,nditioner is
designed for installation in standard
double-hung windows with actual
opening widths from 21" to 35",
The upper and lower wind_ sash
must open sufficiently to allow a
clear vertical opening of 12" from the
bottom d the upper sash to the
windc_J stool.
-21" to 35" ----
12" rain
WARNING: This product is a WINDOW AIR CONDITIONER.
As such, a standard single-hung or double-hung window is required
for proof ins_llation. Non-window installations, including using
sleeves, holes in walls, and other installations are not recommended_
12 Room Air Conditioner
Instattation
Install the air _n,ditio, ner where the
sunlight does not shine directly on the
unit.
later or Wall
17',:_/16'' rnin
(Without: Frame Culiain}
Offset
1/2° to 1I/4_'_
E×t:edor
Proper clearance enhances the cooling efficiency of the, unit and prevents heat
radiation of the condenser.
* The bottom of the cabinet should be 30" to 60" above the ground.
* The outside of the cabinet must extend outward for at least 1/2".
* There should be no obstacles such as a fence o,r wall within 20" from the back
d the cabinet.
* All side louvers of the cabinet must remain exposed to the outside of the
structure.
Cooled Air
Aw n ing
Fence
_n'er's Manual 13
lnsta,/lation
1. insert the guide panels(Type G)
into the guides, of the air conditioner
(Type H),Fasten the curtains to the
unit with screws (Type A).
: Use a long screwdriver and
installing the screws will be easier.
2,,Cut the adhesive-backed seal s_ip,
(Type E) to the window width.
Remove the b,acking from the seal
strip and attach the seal striip to the
underside of the _ttom window.
3. Locating unit in window
Open the w[n,dow and mark center line
on the _nter of the inner sill,
iS
4_Attach L bracket
.4-1, install the L brackets behind the
inner window sill with short side of
bracket as shown, Use the 2 screws
(Type A) provided.
4-2. The bracket helps to hold unit
securely in place. Be sure to place
bracket edge flush against back of
inner sili.
I;aside
Center Line
14 Room Air Conditioner
installation
Caution: During the _llowing step, hold unit firmly until window sash
is lowered to top channel behind side panel frames.. IPe_onal injury or
property damage may result if unit falls from wind_.
!_ install the air conditioner in the window
1-1. Carefully Illiftthe air conditioner and
slide it into the open window. Make
sure the _ttom guide of the air
_nditioner drops into, the notches of
the L bracket.
: When the air conditioner drops
into the L bracket, the air _nditioner
will be centered in window opening.
T
CENTERLINE
i=2_
While steadying the air _nditioner,
carefully bring the window sash
down behind the upper guide of the
air conditioner_
When the air _nditioner is. properly
installS, it should tilt slightly d_n at
the back. If it is set correctly in the
window, it will hang I_er in the back
automatically.. If it does not, there is a
problem with the installation.
W_ND_-A__FRAME_-_,
UPPERG_JID_---_._
h
2, Secure the guide panels
Extend the guide panels (Type G) to,
fill the window opening ,using 2 screws ,(Type B),
2 screws (Type C) to secure them_
3. Install the sash seal and sash lock
3-1.
3,_2
3i_3,
Cut the sash seal (Type F) to the
wind_ width. Stuff the sash seal
between the glass and the window
to prevent air and insets from
getting into tlhe room...
Fasten the L bracket using a screw
(Type A)
Remove the s,cr,_s that s_ure the
cabinet and base pan in the right
L B_CKET
TYPE C
4. Window installation of room air conditioner is now completed.
S_ ELECTRICAL DATE for a_aching power cord to electrical outlet.
Owner's Manual 1:5
Operating instructions
CAUTION: ff you turn off the air conditioner or switch from cooling to
tlhe fan, wait at least 3 minutes _re _ffing to cooling again,,
POWER -Turns air conditio, ner off.
FAN SPEED "LOW"Low speed fan operation with c_ling or not.
FAN SPEED "HI" High speed fan operation with _oling or not.
This automatically controls the temperature of ind_r air. Turn the knob, so that
arrow _ints to the cooler marks for more moderate cooling.
I> Nodal Fan
1.Turn the FAN speed m_e switch to the "Hi" or the "LOW" setting
2. Set the thermostat control to the temperature mark "Fan Only"
Nodal cooling
1.Turn the FAN speed m_e switch to the "HI" or the "LOW" setting
2. Set the thermostat controi to the desire temperature (the mid-_int is a good
starting position).
If the room temperature is not satisfactory after a reasonable time, adjust the
control to a warmer setting, as appropriate.
Maximum cooling
1.Turn the FAN speed m_e switch to the "HI" setting
2. Set the thermostat control to the c_ler temperature mark.
I> Quieter operation
1.Turn the FAN speed m_e switch to the "LOW"' setting
2. Set the thermostat control as needed.
16 Room Air Conditioner
O_ra_ng ]ns;:ructions
The controls look like this:
_ii i iii___%_ii _ _ _
O
O
Power
To turn the Set ON, push the,button. To turn the Set OFF, push the buEon again.
This button takes priori_ over any other buttons,
When you first turn it on, the Set is on the High cool mode and the temp, at 72"F
Fan Speed
Pressingthe Fan Speedbutton toggles between Low and
Highspeeds.
0 On/Off Timer
- Stopping Operation
Each pre_ of the,buttoncycles through the options in this order:
1Hour -_2 Hours_3 Hours-.4 Hours-,5 Hours-.6 Hours-.7 Hours
_8 Hours_,9 Hours_t0 Hiours--,11Hours._12 Hours_CANCLE,
The settemperaturewill be raised 2°F after 30 minutes and again
by 2°F after anot!her30 minutes,
° Starting Operation
Ea_ pressof the button cycles through the options in this order:
1Hour-, 2 Hours-,3 Hours-,4 Hours-'5 Hours--6 Hours-'7 Hours
_ 8 Hours-'9 Hours_10 Hours-.11 Hours-.!2 Hours_CANCLE
0 C_l/Ene_y SavertFan/Dry
Evewtime you push this button, litwill togglle between COOL,
ENERGY SAVER,FAN and DRY.
O
TemperatureSe_ing
This button can automatically control the temperature d the room.
The temperature can be set within a rance of 60_Fto 86°F by I°F,
Select the lower number for lower temperature d the moore
Owner s Manual 17
Operating Instructions
_ AUTION: The Remote Controller will not function properly if strong
light strikes the sensor window of the air conditioner or _ there are
obstacles be_een the Remote Controller and tlhe air conditioner.
To Lurnthe Set ON, push [he button, To turn the Set OFF, push the button again
This biuttoRtakes pr[odty over any other buttons,
When you tint turn it on, the Set [so,nlhe High coo] m_e and [Ihetemp at 72"F
Temperature Setting
This buiton controls the r_m temperaiure _tting in a ran_ between
60T and 86T in ! increments.
Fan Speed
Pres_ the Fan Spc_d Ibutto_[_gles b,e_een Low and!
High :speeds
On!_ Timer
-S_opp,[ngOpera__ion
Each press,d file button cyc_s through the optJo_ in this order:
1 Hour -,2 Ho,u_-*3 Hour-*4 Heu_s--_5Hours-*6 ].4ours_7Hours
._8 Hours=.,9Hours-d0 Hours-,11 Ho,urs._12Hours_CANCLE.
The_t tem_rature will be _a_edby F after30 minutes and again
after .another30 minuCes.
Sta#ing Ol_ration
Ea_ p,_s d the button cyc_s through the e,p_o,r6in this o,rder:
1 Hour_2 H,ours_3 Hours--,4H,o,urs--*5Hours_6 Hours---*7Hours
-,8 Hours--*9Hours-,10 Hours-,11 Hours-,12 Hours-,CN4CLE.
Fan Sp_
Eve@'timeyou push this button, itwill revile between COOL,
ENERGY SAVER, FAN, and DRY.
Energy Saver
The fan stops when the comiPressor sk)ps cooling.
App,roximately eve_ 3 minutes the fan will t:umon and
check the r_m air to delermine, if co,ol[ngiis need_.
How to Inseff Batteries
1..Remo_ the cover from the ba_ d the remote
cont#oil,er
2. inert _o _tteri_.
Be sure of the po,l!arity when installing the
battefi_.
Be sure that both bakeries are new.
3. Re-attach the cover.
Do, not use rechargeable
batteries. Such batteries
di_r from standard dry cells
in shape, dimensions, and
performance.
Remove the batteries from
the remote _ntro, ll!er [f _e air
_ndifloner [s not going to be
u_d for an extended length
d time.
18 Room Air Conditioner
Operating #_structio#s
Air Direction
Adjusting the air direction using the
ho,rizontal air deflector conLroL
Using the con_o_ tabs, the air flaw can
be dir_ted to the Ileff, right, straight
ahead, or any ,combination ,of these
directions..
Drain Pipe
In humid weather, excess water may
cause the Base Pan to overflow. To
drain the water, remove the Drain Cap
and secure the Drain Pipe to the rear
hole of the Base Pan.
Press the drain pipe into the ho_e by
pushing down and away from the fins
to avoid injury.
This air ,_nditioner is equipped with a
slinger fan.. (See drawing, bel_:),
The fan has an outer ring that runs in
the water that colliects in the base pan
if it gets deep. That condensate is then
picked up by the fan and expelled
through the _ndenser, making the air
_nditioner more efficient..
DRAIN
Ring
Be careful when in.fling the drain pipe. Push away from
the sharp fin area to avoid slipping injuring yourself.
Removal From Window
Turn the air _nditioner off, disconnect the power cord, remove the L bracket, the
screws and Support Bracket installed through the top, and bosom d the guide
panels, and save for reinstalliation later. Close the guide panels. Keeping a firm grip
on the air conditioner, raise the sash, and carefully tilt the air conditioner back.ward,
draining any condensate. Lift the air conditioner from the window and remove the
sash seal from between the windows.
Be sure to drain ALL condensate from the air conditioner. If you don't, it could run
out while you carry the unit,making a mess and creating a slipping hazard. This
s[mp,ie step wiii] save you much ,cleaning and make a safer work environment.
Owner's Mar_uat 19
MaintenanceandService
Air Filter
Ch_k the air filter at least _ice a month to see if cleaning is necessary: Trapp_
particles in the filter can build up and block the airflow, reducing _oling capacity
and causing an a_umulation of frost on the eva_rator. To clean the air filter:
1. Remove the air filter from the front grille by lifting the air fitter up.
2, Wash the fitter using lukewarm water betow 40" C (1i04 ° F),
3, Gently shake the ex_ss water from the filter and replace.
Cleaning The Air Conditioner
The front grille and inlet grille may be
wip_ with a cloth dampened in a mild
detergent solution.
The cabinet may be wasihed with mild
soap or detergent andi lukewarm
water, then _lish_ with Liquid Wax
for Appliances.
To ensure continued peak efficiency,
the condenser coils (outside of uni0
should be checked periodically and
cleaned if clogg_ with s_t or dirt
from the atm,osphere_
HOW TO REMOVE THE FRONT GRILLE
i. Remove the screws s_uring the Front Grille
2. Push the grille up from the bottom and pull
the top of the grille away from the case as
the top tabs lift out of their slots.
Room Air Conditioner
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44

Goldstar WG5005 Owner's manual

Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages