2. Greenlee
  3. 658 Tray Type Sheave
658 Tray Type Sheave

Greenlee 658 Tray Type Sheave, 658 Tray Type Sheave Manual User manual

  • Hello! I am an AI chatbot trained to assist you with the Greenlee 658 Tray Type Sheave User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the primary function of the Greenlee 658 Tray Type Sheave?
    What safety precautions should be taken when using the Greenlee 658 Tray Type Sheave?
    What is the correct way to install the Greenlee 658 Tray Type Sheave?
    What components make up the Greenlee 658 Tray Type Sheave?
999 6439.2 © 2019 Greenlee Tools, Inc. IM 800 Rev 7 10/19
658
TRAY TYPE SHEAVE
OPERATION, SERVICE AND PARTS
INSTRUCTION MANUAL
Read and understand this material before operating
or servicing this tool. Failure to understand how to
safely operate this tool could result in an accident
causing serious injury or death. This tool should only
be operated by qualified personnel.
Greenlee Tools, Inc.
2
4455 Boeing Drive, Rockford, IL 61109 815/397-7070
Tray Type Sheave
The 658 Tray Type Sheave is designed to help roll and
guide cable during tray pulls.
Installation
1. Position the tray frame where needed.
2. Clamp at least 2 of the of the cable tray rungs
between the tray frame and clamp plate.
3. Fasten with carriage bolts and wing nuts.
Description
• Follow cable tray manufacturer’s and cable
manufacturer’s instructions when pulling cable
in tray.
• Read and understand instruction manual
included with cable puller.
Failure to observe these warnings could result in
severe injury or death.
Tray-type Pulling Setup
WRONG WAY
RIGHT WAY
Greenlee Tools, Inc.
3
4455 Boeing Drive, Rockford, IL 61109 815/397-7070
Tray Type Sheave
Key Part Number Description Qty
1 501 5362.5 Sheave ..............................................................................................1
2 905 0302.3 Spring Clip .........................................................................................2
3 501 7323.5 Sheave Pin Unit, 6-1/4" (includes 2 Key #2) .....................................1
4 502 5651.3 Tray Frame ........................................................................................1
5 501 7327.8 Clamp Plate .......................................................................................1
6 501 7324.3 Carriage Bolt 7/16-14 x 3" .................................................................2
7 501 7325.1 Wing Nut, 7/16-14..............................................................................2
658 Tray Type Sheave
7
5
4
3
2
1
6
Greenlee Tools, Inc.
4455 Boeing Drive, Rockford, IL 61109-2988 USA
General Offices: 815/397-7070
Customer Center and Field Service: 800/435-0786
Fax (24 Hour) Customer Center: 800/451-2632 • 815/397-1865
Canada Fax (24 Hour) Customer Center: 800/524-2853
Printed in U.S.A.
/