Everex Stepnote SA series Quick start guide

Using SA Series User Manual

For accessing the User Manual on your Windows® Desktop, please click the All Programs, Manual, then

point to SA Series_Manual_Everex.( as shown in Figure 1) to read the User Manual (as shown in Figure 2)

(Figure 1)

(Figure 2)

Attention :

I. For Recovery System

Please refer to the information depicted in the Appendix B of User Manual on

your Windows® desktop.

II. For Safety Regulation:

1. Risk of explosion if battery is replaced by an incorrect type.

2. For electrical safety concerns, only use telephone cables rated 26AWG or

higher.

3. The Dual or Combo drive is a Class 1 Laser Product.

4. Li-Ion battery is vulnerable, do not charge it with other power adapter, or

it may cause fire or explosion.

5. For the power supply of this equipment,

z An approved power cord has to be used.

z Make sure the socket and any extension cord(s) you use can support

the total current load of all the connected devices.

z Before cleaning the computer, make sure it is disconnected from any

external power supplies (i.e. AC adapter).

For more details, please refer to the user manual on your Windows® desktop.