Daikin L48-290 User guide

Daikin
Brand
Daikin
Model
L48-290
Type
User guide
BRC2A71
QUG-BRC2A71_10/08
Quick User Guide
BRC2A71 Controller
1. Operation Light: Lit when system is on.
Blinks in the event of a system malfunction.
2. Start operation with the ON/OFF button.
3. Centralized Control is indicated when the
icon is displayed. Centralized Control is
only realized when an optional Daikin multi-
zone controller is applied to the system.
4. Fan speed is displayed:
5. Defrost / Hot Start: Indicates that
defrost or hot start is in progress.
The fan stops until the temperature of air
supply rises enough at the beginning of a
heating operation.
6. Fan Speed: Press to select High or Low fan
speed.
7. Mode Selection Button: The five MODE
icons indicate current operation mode. Select
from:
FAN Fan only operation (Room air is
circulated.)
DRY Cooling Operation − Unit operates
to minimize temperature change but reduces
room humidity levels.
*AUTO Auto changeover (not available
with some Daikin Systems) - Cooling and
Heating switch automatically to maintain the
desired setpoint temperature.
COOL Cooling Operation − To the
desired setpoint temperature.
HEAT Heating Operation − To the
desired setpoint temperature.
8. Temperature Selection Buttons: Use to set
the required temperature setpoint. Each press
up raises the set temperature by 1°F, pressing
down lowers by 1°F. The temperature setting
range is 60°F - 90°F.
9. Temperature Setpoint display.
10. Maintenance required: The wrench icon
indicates a system malfunction and that
service is required.
11. Current Operation Mode: These icons
represent the current operation mode:
12. Changeover indicates that you cannot
changeover heating/cooling with the remote
controller. The absence of this icon indicates
that the controller is designated as the
changeover master with authority to change
the system mode between heating & cooling.
See details in the installation manual.
FAN DRY AUTO COOL HEAT
Current Operation Mode* 11.
2. ON/OFF
Temperature 9.
4. Fan Speed
Selection Buttons
Malfunction 10.
5. Defrost / Hot Start
7. Mode Selection Button
3. Centralized Control
6. Fan Speed
1. Operation Light
* Auto changeover mode is not available with some Daikin Systems
Setpoint
Temperature 8.
Changeover 12.
H: high L: low
  • Page 1 1

Daikin L48-290 User guide

Daikin
Brand
Daikin
Model
L48-290
Type
User guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents