JBL SUB150P Product information

SUB150P
JBL
Brand
JBL
Model
SUB150P
Category
Subwoofers
Type
Product information

JBL SUB150P: Experience powerful and immersive bass with this high-performance subwoofer, designed to enhance any multichannel audio system. Its 10-inch PolyPlas™ transducer and 300W RMS amplifier deliver deep, tight bass, while the bass-reflex enclosure and down-firing design provide optimal sound dispersion. Enjoy customizable settings with adjustable crossover frequency and phase control for seamless integration with your existing speakers.

JBL SUB150P: Experience powerful and immersive bass with this high-performance subwoofer, designed to enhance any multichannel audio system. Its 10-inch PolyPlas™ transducer and 300W RMS amplifier deliver deep, tight bass, while the bass-reflex enclosure and down-firing design provide optimal sound dispersion. Enjoy customizable settings with adjustable crossover frequency and phase control for seamless integration with your existing speakers.

There is no substitute for the deep, visceral excitement powered subwoofers add to multichannel audio, particularly
movie soundtracks. But conventional front-ring subwoofer systems can appear boxy and may require special
placement within a room for optimum performance. By contrast, the JBL
®
SUB150P houses a 250mm (10"), 300W
down-ring transducer in a trapezoidal bass-reex enclosure that ts just about anywhere. Designed to connect to
virtually any A/V receiver and to work with virtually any speakers, the SUB150P will add high-impact, low-distortion
bass response to any music or home theatre system, heightening the emotional impact of any listening experience. No
multichannel system is complete without a subwoofer, and the SUB150P ensures that no system need go without.
Add powerful, realistic bass to any multichannel audio system
JBL
®
SUB15oP
TECHNICAL SPECIFICATIONS
Low-frequency transducers: 250mm (10") PolyPlas
™
cone
Amplier power: 300 watts RMS, 500 watts peak
Frequency response: 27Hz – 150Hz (–3dB)
Crossover frequencies: 50Hz – 150Hz (variable), 24dB/octave
Enclosure type: Ported
Power requirement: 120V, 60Hz (US); 220V – 230V, 50Hz/60Hz (EU)
Power consumption: <1W (0.04A @ 230V) standby; 320W (1.8A @ 230V) peak
<6W (0.06A @ 120V) standby; 320W (3.2A @ 120V) peak
Dimensions (H x W x D): 470mm x 441mm x 441mm (18-1/2" x 17-3/8" x 17-3/8")
Weight: 18kg (39.7 lb)
Finishes:
JBL SUB15oP
Add powerful, realistic bass to any multichannel audio system
HARMAN Consumer, Inc.
8500 Balboa Boulevard., Northridge, CA 91329 USA
www.jbl.com
© 2010 HARMAN International Industries, Incorporated. All rights reserved. JBL is a trademark of HARMAN International
Industries, Incorporated, registered in the United States and/or other countries. PolyPlas is a trademark of HARMAN
International Industries, Incorporated.
Features, specifications and appearance are subject to change without notice.
HIGHLIGHTS
Fast 10-inch (250mm) PolyPlas
™
low-frequency transducer
Stiff cone material delivers tight, high-impact bass for heightened realism and excitement
300W RMS amplier
High-output performance with lower heat generation at all volume levels
Digital amplier circuitry
High-efciency design delivers more power with less heat
Bass-reex enclosure
Ported design increases bass output relative to sealed enclosures for greater realism
Down-ring transducer
Interacts with your oor rather than your walls for cleaner response with fewer unwanted
reections
Exclusive JBL Weave Design
Distinctive, compact trapezoidal enclosure delivers full-size subwoofer performance with less bulk
KEy FEATurES
• LFE and line-level inputs enable noise-free connections to virtually any A/V receiver
• Adjustable crossover frequency lets you optimise performance for use with a variety of speakers
• Phase control switch ensures that the subwoofer driver moves in sync for speaker drivers,
increasing bass output
• Auto power on/off simplies operation, saves energy
  • Page 1 1
  • Page 2 2

JBL SUB150P Product information

SUB150P
JBL
Brand
JBL
Model
SUB150P
Category
Subwoofers
Type
Product information

JBL SUB150P: Experience powerful and immersive bass with this high-performance subwoofer, designed to enhance any multichannel audio system. Its 10-inch PolyPlas™ transducer and 300W RMS amplifier deliver deep, tight bass, while the bass-reflex enclosure and down-firing design provide optimal sound dispersion. Enjoy customizable settings with adjustable crossover frequency and phase control for seamless integration with your existing speakers.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents