2. Computers & electronics
  3. Audio & home theatre
  4. Subwoofers
  5. JBL
  6. SUB150P
SUB150P

JBL SUB150P Product information

  • Hello! I am an AI chatbot trained to assist you with the JBL SUB150P Product information. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the frequency response of the JBL SUB150P?
    What is the power output of the JBL SUB150P?
    What type of enclosure does the JBL SUB150P have?
    What is the crossover frequency range of the JBL SUB150P?
    What are the input options of the JBL SUB150P?
    What is the power consumption of the JBL SUB150P?
    What are the dimensions and weight of the JBL SUB150P?
There is no substitute for the deep, visceral excitement powered subwoofers add to multichannel audio, particularly
movie soundtracks. But conventional front-ring subwoofer systems can appear boxy and may require special
placement within a room for optimum performance. By contrast, the JBL
®
SUB150P houses a 250mm (10"), 300W
down-ring transducer in a trapezoidal bass-reex enclosure that ts just about anywhere. Designed to connect to
virtually any A/V receiver and to work with virtually any speakers, the SUB150P will add high-impact, low-distortion
bass response to any music or home theatre system, heightening the emotional impact of any listening experience. No
multichannel system is complete without a subwoofer, and the SUB150P ensures that no system need go without.
Add powerful, realistic bass to any multichannel audio system
JBL
®
SUB15oP
TECHNICAL SPECIFICATIONS
Low-frequency transducers: 250mm (10") PolyPlas
™
cone
Amplier power: 300 watts RMS, 500 watts peak
Frequency response: 27Hz – 150Hz (–3dB)
Crossover frequencies: 50Hz – 150Hz (variable), 24dB/octave
Enclosure type: Ported
Power requirement: 120V, 60Hz (US); 220V – 230V, 50Hz/60Hz (EU)
Power consumption: <1W (0.04A @ 230V) standby; 320W (1.8A @ 230V) peak
<6W (0.06A @ 120V) standby; 320W (3.2A @ 120V) peak
Dimensions (H x W x D): 470mm x 441mm x 441mm (18-1/2" x 17-3/8" x 17-3/8")
Weight: 18kg (39.7 lb)
Finishes:
JBL SUB15oP
Add powerful, realistic bass to any multichannel audio system
HARMAN Consumer, Inc.
8500 Balboa Boulevard., Northridge, CA 91329 USA
www.jbl.com
© 2010 HARMAN International Industries, Incorporated. All rights reserved. JBL is a trademark of HARMAN International
Industries, Incorporated, registered in the United States and/or other countries. PolyPlas is a trademark of HARMAN
International Industries, Incorporated.
Features, specifications and appearance are subject to change without notice.
HIGHLIGHTS
Fast 10-inch (250mm) PolyPlas
™
low-frequency transducer
Stiff cone material delivers tight, high-impact bass for heightened realism and excitement
300W RMS amplier
High-output performance with lower heat generation at all volume levels
Digital amplier circuitry
High-efciency design delivers more power with less heat
Bass-reex enclosure
Ported design increases bass output relative to sealed enclosures for greater realism
Down-ring transducer
Interacts with your oor rather than your walls for cleaner response with fewer unwanted
reections
Exclusive JBL Weave Design
Distinctive, compact trapezoidal enclosure delivers full-size subwoofer performance with less bulk
KEy FEATurES
• LFE and line-level inputs enable noise-free connections to virtually any A/V receiver
• Adjustable crossover frequency lets you optimise performance for use with a variety of speakers
• Phase control switch ensures that the subwoofer driver moves in sync for speaker drivers,
increasing bass output
• Auto power on/off simplies operation, saves energy
/