Ignis LEI 1006 Program Chart

Brand: Ignis

Model: LEI 1006

Type: Program Chart

Ignis LEI 1006 is a powerful and versatile induction cooktop that offers a range of features to make cooking easier and more efficient. With its four cooking zones, you can cook multiple dishes simultaneously, and the touch controls allow for precise temperature adjustment. The induction technology heats cookware quickly and evenly, reducing cooking times and saving energy. The cooktop also features a booster function for extra power when needed, and a range of safety features, including automatic pan detection and overheat protection.

GB PROGRAMME CHART

5019 501 05034

❉

= optional / Yes = dosing required.

For improved garment care, spin speed is restricted in these programmes.

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of

Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed accordi

ng to the

instructions on the garment label and those issued in this programme chart. M0619

Programme

Care

Labels

Max.

Load

Ty p e o f w a s h / N ot e s

- Respect the manufacturer’s recommendations on the care label

Detergents and additives Special options

Max.

Spin

Speed

rpm

Pre-

wash

Main

wash

Softener Pre-

wash

Intensive

rinse

Rinse

hold

Spin Start

delay

Rapid

Whites

95 °C

6.0

Normally to heavily soiled and robust white cotton laundry. In case of heavy soiling or stains, you can add an

oxygen-based bleach additive which can be used at 95°C.

❉

Yes

❉ ❉ ❉ ❉ ❉ ❉

—

max.

Cotton

40 - 60 °C

6.0 Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

❉

Yes

❉ ❉ ❉ ❉ ❉ ❉ ❉

max.

Eco Intelligent

40 °C

5.0

Normally to heavily soiled and robust laundry made of cotton and linen.

Automatically adapts programme duration and water consumption to the load size and thus allows

economical washing of even small loads.

❉

Yes

❉❉

—

❉❉❉❉

max.

Synthetics

40 - 60 °C

3.0 Normally soiled garments made of artificial fibres (like polyester, polyacryl, viscose etc.) or their blends with cotton.

❉

Yes

❉ ❉ ❉ ❉ ❉ ❉ ❉

max.

Dark

30 °C

3.0

Black and dark garments made of cotton, cotton blends and polyester.

Special programme to reduce colour fading and local discolouration. Prefer to use a liquid detergent for dark

garments with this programme.

❉

Yes

❉ ❉ ❉ ❉ ❉ ❉ ❉

max.

Delicates

30 - 40 °C

1.5 Curtains and delicate clothing, dresses, skirts, shirts and blouses.

❉

Yes

❉❉

—

❉❉❉

—

1000

Rapid 60’

40 °C

3.0

Slightly to normally soiled robust laundry made of cotton, linen, artificial fibres and their blends.

Effective one-hour programme. Make sure to wash only similar colours together in one wash load.

—

Yes

❉

—

❉❉❉❉

—

max.

Rapid 30’

30 °C

3.0

Shortly worn clothing made of cotton, polyester, polyamide and blends with cotton.

Brief 30-minutes programme to refresh your laundry.

—

Yes

❉

——

❉❉❉

—

max.

Wool

- 40 °C

1.0

Only woollens, labelled with the Woolmark and identified as machine washable.

This programme (40°C) is tested and approved by The Woolmark Company for machine washable wool.

—

Yes

❉

— —

❉ ❉ ❉

—

1000

Handwash

30 - 40 °C

1.0

Textiles made of linen, silk, wool and viscose marked as “handwashable”.

Care programme with a very gentle spin. This programme (40°C) is tested and approved by The Woolmark

Company for handwashable wool.

—

Yes

❉

——

❉❉❉

—

400

Rinse & Spin

—

6.0 Same as the last rinse and the final spin in the “Cotton” programme.

——

❉

—

❉❉❉❉

—

max.

Spin

—

6.0 Intensive spin. Same as spin cycle in the “Cotton” programme.

—— — — — —

❉❉

—

max.

Drain

——

Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”.

—— — — — ——

❉

——

A. “Door open” indication

This washing machine is equipped with

automatic safety functions which detect and

diagnose faults at an early stage and react

appropriately, e.g.:

B. “Service” indication

C. “Water tap closed” indication

D. “Clean pump” indication

E. Programme selector

F. “Start/Pause” button

G. Spin speed selector

H. Programme sequence indicator

and start delay indicators

I. “Reset” button

}

50105034GB.fm Page 1 Wednesday, February 16, 2011 12:02 PM

Black process 45.0° 150.0 LPI

5019 501 05034

Add detergent as indicated on the front page and as described in

the chapter “Detergent and Additives” in your Instructions for Use.

• Turn the

programme selector

to the desired programme and

temperature.

• The indication lamp next to the

“Start/Pause”

button blinks.

•The

indication lamp

of the predefined spin speed lights up.

Push the button of any option desired - the respective indication lights up.

If the combination of programme and option(s) is not possible, the

indication lights switch off automatically. Unsuitable combinations

of options are deselected automatically.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt).

Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when selecting

“Prewash”.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft

water, washing baby linen and helping people with allergies.

“Rinse hold” button

• The laundry remains in the last rinse water without

progressing to the final spin cycle to avoid creasing and prevent

colours from changing.

• Particularly useful if you want to postpone spinning to a later

time, or if you want to drain only.

Note:

The programme stops to “Rinse hold” at the time the

“Rinse hold” light in the programme sequence indication is on. The

indication lamp next to the

“Start/Pause”

button blinks.

Terminate the “Rinse hold” option :

•Press the

“Start/Pause”

button ; the programme will terminate

automatically with the final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the programme

selector to the “Drain” programme and press the

“Start/

Pause”

button .

“Spin” button

• Every programme has a predefined spin speed; press the

button if you want to set a different spin speed.

• If spin speed “0” is selected, the final spinning is cancelled and

the water is drained out only. However, intermediate spin

peaks remain during rinse.

CONSUMPTION DATA

Programme Temperature

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. progr. duration (hrs : min)

without “Rapid” with “Rapid”

Whites 95 6.0 59

1.90 2:00 —

Cotton

60 6.0 49 0.90 4:00 2:30

Cotton

60 3.0 37 0.70 2:30

Cotton 40 6.0 60 0.70 2:45 1:45

Cotton

40 3.0 37 0.60 2:30

Eco Intelligent 40 5.0 76 0.70 3:00 2:00

Synthetics 60 3.0 50

0.80 1:35 1:14

Synthetics 40 3.0 46 0.50 1:20 0:59

Dark 30 3.0 46 0.30 1:16 0:55

Delicates 30 1.5 60 0.50

0:45 —

Rapid 60’ 40 3.0 41 0.50

1:00 —

Rapid 30’ 30 3.0 41 0.40

0:30 —

Wool 40 1.0 60 0.50 0:45 —

Wool 20 1.0 60 <0.10 0:40 —

Handwash 40 1.0 45 0.50

0:40 —

Handwash 30 1.0 45 0.40

0:36 —

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect

to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. Water and energy consumption data refer to the

default setting of the programmes; selecting special options or modifying spin speed or temperature will change the consumption data.

The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also

“Troubleshooting Guide” in your Instructions for Use).

* To reduce the water temperature, some cold water is added at the end of the main wash cycle before the water is drained.

** Reference programmes for Energy Label.

*** Automatic adaption of programme duration after detection of wash load.

***

ADD DETERGENTS, CLOSE THE DOOR

AND SELECT THE PROGRAMME

SELECT ANY DESIRED OPTION

“Rapid” button

• Enables quicker washing by shortening the programme duration.

• Recommendable for small loads or only lightly soiled laundry.

The “Start delay” allows to run the machine at the consumer’s

convenience, for example at night when electricity is cheaper. Do

not use liquid detergent when activating “Start delay”.

• Select programme, temperature and options.

• Press the “Start delay” button to select the desired delay time

of 1, 3, 6, 9 or 12 hours.

•Press the

“Start/Pause”

button .

The indication light of the “Start delay” button blinks and the

countdown of the delay time begins.

• The time delay indication disappears when the programme starts

and it is replaced by the programme sequence indication.

• Once having pressed the

“Start/Pause”

button , the delay

time can be reduced by pressing again the “Start delay” button.

To cancel the “Start delay”

...before you press the “Start/Pause” button :

• Turn the programme selector to another position or press the

“Reset”

button .

...after having pressed the “Start/Pause” button :

•Press the

“Start/Pause”

button - the light of the selected

start delay goes off. Press

“Start/Pause”

again if you

want to start the selected programme immediately.

Open the tap and press the

“Start/Pause”

button . The

indication lamp next to the

“Start/Pause”

button lights up.

The programme sequence indicator shows the current programme

phase, running from left to right through Wash, Rinse, Drain/Spin.

Before starting and after end of a programme, the lamp lights to show

that the door can be opened. As long as a wash programme is running,

the door remains locked and must on no account be forced open. In

case you have an urgent need to open it during a running programme,

refer to “Cancel a running programme before the end”.

In case of any failures or irregularities, consult the

“Troubleshooting Guide” in your Instructions for Use.

“Service”

Lighting up of the “Service” indication can be caused by a fault in an

electrical component.

“Water tap closed”

The washing machine has no or insufficient water supply; the water

tap might be closed or the water inlet hose kinked.

“Clean pump”

Waste water is not pumped out. The drain hose may be kinked or

the filter must be cleaned (see “Cleaning the filter” in your

Instructions for Use).

• All the lights of the programme sequence indicator are off,

and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

1. Press the

“Start/Pause”

button to pause the

programme. The light blinks.

2. Select the new programme and, if you want, another spin

speed and any options.

3. Press the

“Start/Pause”

button again. The new

programme continues at the same position where the

previous programme was interrupted. Do not add detergent

for this programme.

The

“Reset”

button cancels a programme before the end.

•Press and hold the

“Reset”

button for a few seconds.

Any existing water is drained out. It may last some time until

the door can be opened.

START DELAY

PROGRAMME START

“DOOR OPEN” INDICATION

FAILURE INDICATIONS

PROGRAMME END

CHANGE PROGRAMME AND/OR OPTIONS

AFTER PROGRAMME START

CANCEL A RUNNING PROGRAMME

BEFORE THE END

50105034GB.fm Page 2 Wednesday, February 16, 2011 12:02 PM

Black process 45.0° 150.0 LPI

Ignis LEI 1006 Program Chart

Ignis LEI 1006 Program Chart

Ignis LEI 1006 Program Chart

Related papers

Other documents