Whirlpool AWO/D 40410 Program Chart
- Category
- Washing machines
- Type
- Program Chart
This manual is also suitable for
Whirlpool AWO/D 40410 is a washing machine that offers a range of programs and features to help you achieve the best results for your laundry. With a maximum load capacity of 6 kg, it can handle various types of fabrics and garments. The machine offers 12 different programs, including specialized settings for cotton, synthetics, delicates, wool, and handwash items. Additionally, it features options like prewash, cold wash, rinse hold, and variable spin speed, allowing you to customize the wash cycle according to your needs.
Whirlpool AWO/D 40410 is a washing machine that offers a range of programs and features to help you achieve the best results for your laundry. With a maximum load capacity of 6 kg, it can handle various types of fabrics and garments. The machine offers 12 different programs, including specialized settings for cotton, synthetics, delicates, wool, and handwash items. Additionally, it features options like prewash, cold wash, rinse hold, and variable spin speed, allowing you to customize the wash cycle according to your needs.
GB AWO/D 40410 PROGRAMME CHART
❉
: optional / Yes : dosing required
1)
For improved garment care, spin speed is restricted to 700 rpm in this programme.
2)
For improved garment care, spin speed is restricted to 400 rpm in this programme.
5019 301 05989
Whirlpool is a registered trademark of Whirlpool USA
Programme
Care
Labels
Max
Load
kg
Type of wash/Notes
- For temperature selection, respect the manufacturer’s recommendations on the care label
Detergents and additives Special options
Max
Spin
Speed
rpm
Pre-
wash
Main
Wash
Softener Pre-
wash
Cold
wash
Rinse
hold
Variable
spin
Cotton /
Antibacterial
60 - 95 °C
6.0
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of
cotton and linen.
Selecting “Cotton 95”, this programme eliminates bacteria, ensuring sanitization of your
laundry. The bacteria removal efficiency has been tested following a similar methodology to
the NF EN 13697 standard of Nov. 2001.
With heavily soiled laundry the additional “Prewash” option can be selected as well.
❉
Yes
❉❉❉❉❉
700
Cotton
40 °C
5.0
Synthetics
30 - 40 - 60 °C
2.5
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide
(Perlon, Nylon) or blends with cotton.
❉
Yes
❉❉❉❉❉
700
1)
Delicates
30 - 40 °C
1.5 Curtains and delicate clothing, dresses skirts, shirts and blouses.
❉
Yes
❉❉❉❉❉
700
1)
Daily load
60min
40 °C
3.0 Slightly to normally soiled textiles made of cotton and/or synthetics.
—
Yes
❉
—
❉❉ ❉
700
Quick wash
30min
30 °C
3.0 Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton.
—
Yes
❉
—
❉❉ ❉
700
Wool
Cold - 40 °C
1.0
Only woollens with a felt-free finish, labelled with the woolmark and identified as machine
washable.
If you select “Rinse Hold” do not leave items to soak for too long.
—
Yes
❉
—
❉❉ ❉
700
1)
Handwash
30 - 40 °C
1.0
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
If you select “Rinse Hold” do not leave items to soak for too long. A very gentle spin is used in this
programme.
—
Yes
❉
—
❉❉ ❉
400
2)
Rinse & Spin
—
6.0
Same as the last rinse and the final spin in the “Cotton” programme.
——
❉
——
❉❉
700
Spin
—
6.0
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
—— ————
❉
700
Gentle Spin
—
1.0
In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.
—— ————
❉
700
1)
Drain
——
Water is drained only without any spinning.
—— ————— —
A. “Door open” indication
This washing machine is equipped with
automatic safety functions which
detect and diagnose faults at an early
stage and react appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
E. Programme selector
F. “Start/Pause” button
G. Spin speed selector
H. Programme sequence indicator
I. “Reset” button
D
H
C
F
I
G
E
B
A
30105989GB.fm Page 1 Wednesday, December 27, 2006 6:22 PM
Black process 45.0° 100.0 LPI
5019 301 05989
Whirlpool is a registered trademark of Whirlpool USA
Add detergent as indicated on the front page and as
described in your Instructions for Use. Close the door
and turn the
programme selector
to the desired
programme and temperature. The indication lamp
next to the
“Start/Pause”
button flashes.
Push the button(s) of any option(s) desired - the
respective indication lamp lights up.
When the combination of programme and additional
option(s) is not possible, the indication lights switch
off automatically. Unsuitable combinations of options
are deselected automatically.
“Prewash” button
• Only for heavily soiled loads (for example sand,
granular dirt) sensible. Increases the cycle time
by approximately 15 min.
“Cold wash” button
• Water is heated only up to 20°C
• Suitable for delicate laundry items with wash
temperature recommendation of max. 30° on
the care label.
• Selectable only on the lowest temperature step
of each programme.
“Rinse hold” button
• The laundry remains in the last rinse water
without progressing to the final spin cycle to avoid
creasing and prevent colours from changing.
• This option is particularly recommended for the
programmes “Synthetics”, “Daily load” and
“Delicates”.
•This function is particularly useful if you want to
postpone spinning to a later time, or if you want
to drain only.
Note:
The programme stops to “Rinse hold” at
the time the “Anticrease” light in the programme
sequence indicator is on. The indication lamp
next to the
“Start/Pause”
button flashes.
• If you select “Rinse Hold”, do not leave the
laundry items to soak for too long.
Terminate the “Rinse hold” option:
• Press the
“Start/Pause”
button; the
programme will terminate automatically with the
final spin cycle for the present wash programme.
• If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain”
programme and press the
“Start/Pause”
button.
CONSUMPTION DATA
Programme
Temperature
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx. Programme
Duration
(hours : minutes)
*
Cotton / Antibacterial
95 6.0 59
**
1.90 2:00
Cotton
***
60 6.0 49 1.14 2:10
Cotton 40 5.0 56 0.70 2:00
Synthetics 60 2.5 50
**
0.80 1:35
Synthetics 40 2.5 46 0.50 1:20
Delicates 30 1.5 60 0.50 0:45
Daily load 60min 40 3.0 41 0.50 1:00
Quick wash 30min 30 3.0 41 0.40 0:30
Wool 40 1.0 60 0.50 0:45
Handwash 40 1.0 45 0.50 0:40
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption
data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature,
the load and the type of wash.
*
The remaining time indicator can deviate from the values in the table, because it takes into account the household
conditions applicable at that time.
**
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains
the water out.
***
Reference Programme for Energy Label.
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
SELECT ANY DESIRED OPTION
“Variable spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain
during rinse. The water is drained out only.
Open the tap and press the
“Start/Pause”
button.
The indication lamp next to the
“Start/Pause”
button
lights up. The programme sequence indicator shows
the current programme phase, running from left to
right through Wash, Rinse, Spin/Drain.
• When the programme phase is finished, the
corresponding indication goes out.
Before starting and after end of a programme, the
lamp lights to show that the door can be opened. As
long as a wash programme is running, the door
remains locked and must on no account be forced
open. In case you have an urgent need to open it
during a running programme, refer to “Cancel
(Reset) a running programme before the end”.
“Service”
Lighting up of the “Service” indication can be caused by
a fault in an electrical component. Refer to the
“Troubleshooting Guide” in your Instructions for Use;
if the fault persists, contact our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply.
Open the water tap; if the indication still lights up,
refer to the “Troubleshooting Guide” in the
Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the
drain hose is kinked or the filter must be cleaned; in
the latter case refer to the Instructions for Use
(“Removing the Filter”).
• All the lights of the programme sequence
indicator are off, and the “Door open”
indication lights up.
1. Turn the programme selector to the “Off/O”
position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
1. Press the
“Start/Pause”
button to pause the
programme. The light flashes.
2. Select the new programme (with temperature),
any options and another spin speed if you want.
3. Press the
“Start/Pause”
button again. The new
programme continues at the same position where
the previous programme was interrupted. Do not
add detergent for this programme.
The
“Reset”
button cancels a programme before
the end.
• Press the
“Reset”
button for at least 3
seconds. Any existing water is drained out
before the door can be opened.
PROGRAMME START
“DOOR OPEN” INDICATION
RED INDICATIONS
PROGRAMME END
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
30105989GB.fm Page 2 Wednesday, December 27, 2006 6:22 PM
Black process 45.0° 100.0 LPI
-
1
-
2
Whirlpool AWO/D 40410 Program Chart
- Category
- Washing machines
- Type
- Program Chart
- This manual is also suitable for
Whirlpool AWO/D 40410 is a washing machine that offers a range of programs and features to help you achieve the best results for your laundry. With a maximum load capacity of 6 kg, it can handle various types of fabrics and garments. The machine offers 12 different programs, including specialized settings for cotton, synthetics, delicates, wool, and handwash items. Additionally, it features options like prewash, cold wash, rinse hold, and variable spin speed, allowing you to customize the wash cycle according to your needs.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Whirlpool AWM 6071 Program Chart
-
-
-
-
-
-
Whirlpool AWO/D 40400 Program Chart
-
Whirlpool AWO 5126 Program Chart
-
-