2. ASROCK
  3. BTC PRO Kit

ASROCK BTC PRO Kit User manual

  • Hello! I am an AI chatbot trained to assist you with the ASROCK BTC PRO Kit User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
PB 1
P/N: 15G06X714000AK V1.0
*15G06X714000AK*
BTC PRO Kit
Specications
BTC_X16
•
1 x PCI Express x16 Slot
•
2 x PCIE Signal Connectors
•
1 x PCIE Power Connector
BTC-CARD-X1
•
PCI Express Gold Finger
•
2 x PCIE Signal Connectors
•
1 x PCIE Power Connector
Cables
•
2 x PCIE Signal Cables
•
1 x PCIE Power Cable
PackageContents
•
1 x BTC_X16
•
1 x BTC-CARD-X1
•
2 x PCIE Signal Cable (Straight Plug to Right
Angled Plug, 340mm)
•
1 x PCIE Power Cable (5-pin, 360mm)
InstallationProcedure
Note:
*WAKE Function is not supported.
*SMBus Function is not supported.
*e maximum +12V current for PCIE Power
cable is 6A.
*PCI Express 3.0 is supported.
BTC-CARD-X1
BTC_X16
PCIE Power Cable
PCIE Signal Cables
1. Connect one end of the PCIE Signal Cable (with Right
Angled Plug) to the CON_1 connector on the BTC_X16.
2. Connect the other end of the PCIE Signal Cable (with
Straight Plug) to the CON_1 connector on the BTC-
CARD-X1.
3. Connect one end of the PCIE Signal Cable (with Right
Angled Plug) to the CON_2 connector on the BTC_
X16.
4. Connect the other end of the PCIE Signal Cable (with
Straight Plug) to the CON_2 connector on the BTC-
CARD-X1.
5. Connect one end of the PCIE Power Cable to the
CON_3 connector on the BTC_X16.
6. Connect the other end of the PCIE Power Cable to the
CON_3 connector on the BTC-CARD-X1.
1
2
6
3
4
5
2 PB
BTC PRO Kit:
7. Install your graphics card to a PCIe x16 slot on the BTC_X16.
Install the BTC-CARD-X1 to a PCIe x1 slot on the motherboard.
or
Install the BTC-CARD-X1 to a PCIe x4, x8 or x16 slot on the motherboard.
Never install BTC-CARD-X1 in the wrong orientation; otherwise, the card may be damaged.
BTC-CARD-X1
BTC_X16
/