AKR 676-677-976-999
5019 100 75020
1.
Control panel
2.
Grease filter
3.
Lighting unit
4.
Telescopic flue
5.
Utensil rack (only AKR 677)
REMOVING AND RENEWING OR
CLEANING THE GREASE FILTER:
1.
Unplug the appliance or switch off the mains
power supply.
2.
Remove the grease filter:
a.
push the handles backwards
b.
and then pull downwards.
3.
After renewing or cleaning the grease filter
(depending on model) repeat the above
steps in reverse to reassemble, making sure
the entire extraction surface is covered.
MOUNTING OR RENEWING THE
CARBON FILTER:
1.
Unplug the appliance or switch off the mains
power supply.
2.
Remove the grease filters.
3.
If the carbon filters are already mounted (two
filters covering the motor protection grille)
and need renewing, turn the central knob
anticlockwise until the filters are released.
4.
If the filters are not mounted, fit one on each
side covering both the motor protection
grilles. Turn the central knob clockwise.
5.
Refit the grease filters.
RENEWING BULBS
1.
Unplug the appliance or switch off the mains
power supply.
2.
Remove the grease filters.
3.
Remove the lighting unit from the clips that fix
it to the hood body.
4.
Remove the burnt-out bulb and insert a
new one.
Use only 40W max (E14) bulbs.
5.
Remount the lighting unit.
CONTROL PANEL
1.
Light switch.
2.
Speed selector.
4
3
1
2
2
2
2
O I O123
small amount of
steam and fumes
medium amount of
steam and fumes
AB
H SK CZ BGPL
RUS
GB
RO
large amount of
steam and fumes
PRODUCT DESCRIPTION SHEET
